Democritus University of Thrace (DUTH)
Design of protection schemes for power distribution networks with distributed generation
Abstract
dc:descriptionThe prospect of mass integration of distributed generation poses serious challenges for the operation of modern distribution networks. One of these challenges regards the reliable operation of the protection scheme. Specifically, the short-circuit current contribution of distributed generators and the appearance of bi-directional short-circuit current flow conditions can compromise the sensitivity and security of conventional overcurrent protection schemes. Moreover, future distribution networks with DG are envisioned operating in a ring-type or meshed configuration, besides the conventional radial configuration, as well as switching between the gridconnected and the islanded mode, in order to enhance their reliability. These new system conditions further impose reconsidering traditional distribution network protection practices. Given that the design of complete protection solutions for distribution networks with distributed generation is still under research worldwide, the main goal of the present thesis is to propose practical protection schemes for such applications, addressing any relevant protection issue.The design of protection schemes for radial distribution networks with distributed generation is initially studied in this thesis. Distance protection is considered for this purpose, due to its significant advantages compared to other protection principles. In order to design a complete distance-based protection solution, suitable for distribution networks with distributed generation, several factors affecting distance protection performance have to be analyzed. At first, the effect of zero-sequence compensation factor on distance relays protecting distribution networks against ground faults is examined. Theoretical and simulation-based analysis shows that, unlike homogeneous transmission networks, the zero-sequence compensation factor affects the impedance calculation accuracy of distance relays in inhomogeneous overhead distribution networks. In addition, it is observed that the effect of zero-sequence compensation factor follows a specific pattern, when common overhead distribution network conductors are considered. Based on this pattern, a simple methodology for properly setting zero-sequence compensation factor in such applications is proposed, validated through simulations in a test radial distribution network.After that, the infeed effect of intermediate distributed generation, as well as the effect of fault resistance on distance protection is studied, both theoretically and through simulations in a test distribution network. In fact, this study focuses on the particularities of this effect in distribution network applications.Based on the above analysis and the protection requirements of radial distribution networks, complete guidelines are subsequently proposed, regarding the design of distance protection schemes for radial distribution networks with distributed generation. After being described step-by-step, these guidelines are applied to an actual radial overhead and an actual radial underground distribution network with distributed generation.Next, this thesis focuses on the protection of ring-type and meshed distribution networks with distributed generation, able to operate in both the grid-connected and the islanded mode. Within this context, a pilot distance protection scheme is initially proposed, accompanied by a detailed relay setting methodology. Although inspired from traditional pilot distance protection schemes, applied to transmission networks, this protection scheme is suitably designed for the needs of distribution network applications. The applicability and the efficiency of the proposed pilot distance protection scheme is demonstrated through simulations in a test meshed distribution network with distributed generation.As a next step, protection design complexity in distribution networks with distributed generation is addressed, especially those operating in a ring-type or meshed configuration and being able to switch between the grid-connected and the islanded mode. In particular, a communication-assisted plug-and-play protection scheme is proposed for this purpose. This protection scheme does not require user-defined settings, normally resulting from a simulation study, and is, as far as possible, independent of a specific distribution network. The plug-and-play protection scheme is tested through an extensive simulation study, considering different fault/system scenarios.Finally, the present thesis proposes an undervoltage protection function for distributed generators connected to distribution networks, which is adjusted to the recent universal low-voltage-ride-through requirements, included in the IEEE Standard 1547-2018. Among others, these requirements regard consecutive low-voltage disturbances (which are mainly due to reclosing operations), whose cumulative effect is taken into account by the proposed undervoltage protection function. The function’s performance is evaluated by simulating different low-voltage disturbance scenarios, considering both a programmable voltage source and a distributed generator connected to an actual distribution network.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tsimtsios, Aristotelis
- Τσίμτσιος, Αριστοτέλης
Subjects
dc:subject × 16- Διεσπαρμένη παραγωγή
- Δίκτυο διανομής
- Ηλεκτρονόμος προστασίας
- Προστασία συστημάτων ηλεκτρικής ενέργειας
- Σχήμα προστασίας
- Distributed generation
- Distribution network
- Power system protection
- Protection scheme
- Protective relay
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/49615