University of Patras
Ανάλυση σφαλμάτων σε μηχανές μόνιμων μαγνητών αξονικής ροής για εφαρμογές ανεμογεννητριών με τη χρήση της τρισδιάστατης μεθόδου πεπερασμένων στοιχείων
Abstract
dc:descriptionThe greatest part of the electricity is generated from the fossil fuels. However, their excessive use can lead to their exhaustion and environmental burden. For this reason, the scientific community turned to alternative ways of generating electricity, in order to cover part of the production in an efficient and environmentally sustainable way. A very popular way to generate electricity is by the wind, using wind turbines. Until recently, the wind energy conversion systems consisted mainly of asynchronous machines. However, the evolution in the field of permanent magnets and power electronics, leaded to the increment of the use of the permanent magnet synchronous machines in wind power applications. The latest development, in the field of electric machines, which are used as wind turbines, are the axial flux permanent magnet synchronous machines. These machines are characterized by compact and robust structure, relatively small size and simple construction. In addition, they have high efficiency, high torque to weight ratio, while they have a shorter axial length compared to the radial flux permanent magnet synchronous machines. The main purpose of this PhD dissertation is to study and analyze the axial flux permanent magnet synchronous (AFPMS) machine for wind power applications. The study is performed both in the healthy condition and under faulty conditions, using the three-dimensional finite element method, in Opera-3D software. At the same time, experimental tests were performed in the AFPMS Machine in the laboratory in order to verify the 3D model used in the finite element method, while analytical equations are also exported for further validation of the findings. In detail, firstly the healthy condition of the machine is studied, the three-dimensional model is validated using experimental results and the analytical equations of the magnetic flux density of the machine are exported. For comparison purposes both single stator-single rotor and single stator-double rotor topologies are studied. Then, various faulty cases, which can often occur in the machine, such as the demagnetization, the eccentricity and their combination, are studied. The aim is to obtain fault signatures, in the under-study spectra, capable of diagnosing each faulty condition and separating the faults from each other. In the case of demagnetization fault, the EMF voltage spectrum and the stator current spectrum are used for fault indication. The demagnetization fault analysis is realized through the three-dimensional finite element method, while, concurrently in the case of the total demagnetization, experiments are performed on the real machine which has been constructed in the laboratory. In addition, for the case of total demagnetization, novel, analytical equations of the magnetic flux density are exported, and the resulting assumptions are extended to most cases of partial demagnetization. Moreover, the partial demagnetization of the magnet ends is studied. Additionally, the static eccentricity, both angular and axial, is studied using the three-dimensional finite element method. In this case the EMF voltage spectrum, the stator current spectrum and the phase EMF Voltage Sum spectrum are used as fault identification means. Afterwards, the combined partial demagnetization and static angular eccentricity fault, as well as the combined partial demagnetization and static axial eccentricity fault are investigated, using the phase EMF spectrum as fault identification mean. Furthermore, a study and an analysis of the radial flux permanent magnet synchronous (RFPMS) machine connected to the three-phase single switch boost rectifier is achieved, through the two-dimensional finite element method. In this specific system, open and closed loop control is applied, while in each case the losses and the electromagnetic behavior of the machine are studied. The generator-converter system is designed and fully simulated in Opera 2D software, which enables a better electromagnetic insight of the machine, contrary to the majority existing papers on this topic which use simulation tools that usually simulate in detail the electric circuits but not the machine.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Barmpatza, Alexandra
- Μπαρμπατζά, Αλεξάνδρα
Subjects
dc:subject × 32- Ανεμογεννήτριες
- Σύγχρονη μηχανή μόνιμου μαγνήτη
- Αξονικής ροής
- Ακτινικής ροής
- Μέθοδος πεπερασμένων στοιχείων
- Απώλειες γεννήτριας
- Απομαγνήτιση
- Γωνιακή εκκεντρότητα
- Αξονική εκκεντρότητα
- Συνδυαστικά σφάλματα
- Διαγνωστικά μέσα: φάσμα ρεύματος στάτη
- Φάσμα τάσης εξ επαγωγής
- Φάσμα αθροίσματος των τάσεων εξ επαγωγής των τριών φάσεων της μηχανής
- Wind generators
- Permanent magnet synchronous machine
- Axial flux
- Radial flux
- Finite element method
- Generator losses
- Demagnetization
- Angular eccentricity
- Axial eccentricity
- Combined faults
- Diagnostic means: stator current spectrum
- Phase EMF spectrum
- Phase EMF Voltage Sum spectrum
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/49681