Aristotle University Of Thessaloniki (AUTH)
Αντισεισμική μη-γραμμική στατική ανάλυση ασύμμετρων κτιρίων οπλισμένου σκυροδέματος στη μέγιστη δυνατή κατάσταση επικείμενης κατάρρευσης με χρήση καταναγκασμένων μετακινήσεων ορόφων ή ανελαστικών δυναμικών εκκεντροτήτων
Abstract
dc:descriptionThe objective of the current doctoral dissertation is the development of a new documented technique of non-linear Static Analysis (i.e., some type of pushover) that is suitable for the seismic evaluation of ductile asymmetric Reinforced Concrete (r/c) buildings at the performance level of Near Collapse. The development of this technique aims to take fully into account on the one hand the actual coupling of the floor torsional oscillations with the translational ones that develop in asymmetric buildings under translational seismic excitation and on the other hand the influence of the higher modes in multistorey buildings, phenomena that appear -often strongly- in both the linear and the non-linear area. These phenomena are not sufficiently considered in the current seismic regulations, resulting in a significant underestimation of the seismic demands on the extreme sides of floors and on the higher floors of multistorey buildings. The above objective led to the development of two different procedures of non-linear static analysis aiming at the stability of the building in the state of Near Collapse. A key point for performing both procedures is the definition of an ideal "Inelastic" Principal Reference System, called as "Capable Near Collapse Principal System". The definition of this system is achieved by considering the use of "the secant stiffness” that leads directly to the yield point the end-sections (or end-section) of all the structural members of the building. The first proposed non-linear static analysis procedure is a Forced-Based one that uses a -constant shape- loading vector of gradually increasing lateral floor forces applied eccentrically to the Center of Mass of each floor (or equivalently to the assumed real or fictitious elastic center) of the building, at two different locations, by using appropriate inelastic dynamic eccentricities. In addition, two different distributions in elevation of the Base Shear are used. When the accidental eccentricities are also considered in analysis, then the inelastic design eccentricities are used which combine the accidental eccentricities with the inelastic dynamic eccentricities. The second proposed non-linear static analysis procedure is a Direct Displacement-Based one that uses an appropriate -constant shape- loading vector of gradually increasing imposed floor displacements. The load vector consists of three imposed displacements on each floor, two of which are imposed floor translational displacements along the horizontal principal axes (of the considered ideal "inelastic" principal reference system) and the third one is an enforced floor rotation about the vertical axis of the considered ideal "inelastic" principal reference system. Both the appropriate inelastic dynamic eccentricities and the imposed floor displacements come from an extensive parametric analysis of multistorey and single-storey r/c buildings using the non-linear dynamic analysis with acceleration time histories. It is noted that in the second proposed procedure with imposed floor displacements, no superpositions are used in the non-linear area to consider the spatial seismic action and this is achieved by taking the envelope of the results of sixteen separate non-linear static analyses, where in each one of them the imposed floor displacements are properly combined with each other. In contrast, in the first proposed procedure using the inelastic dynamic eccentricities, sixteen simple quadratic combinations (SRSS) are performed on the results of eight separate non-linear static analyses for each load pattern in elevation, as in EN 1998-1.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bakalis, Athanasios
- Μπακάλης, Αθανάσιος
Subjects
dc:subject × 14- Κέντρο δυσκαμψίας ακραίας (μέγιστης) δυνατής επικείμενης κατάρρευσης
- Σεισμικές καταναγκασμένες μετακινήσεις ορόφων
- Ανελαστικές δυναμικές εκκεντρότητες
- Αντισεισμική μη-γραμμική στατική (pushover) ανάλυση
- Capable near collapse centre of stiffness
- Seismic imposed floor displacements
- Inelastic dynamic eccentricities
- Seismic non-linear static (pushover) analysis
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Δομοστατική
- Civil Engineering
- Engineering and Technology
- Structural Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/49775