Back to search

University of Thessaly (UTH)

Design, development and performance evaluation of ultra low-power wireless sensor network devices

Abstract

dc:description

Energy-efficiency in the domain of Internet-of-Things (IoT) dominates the interest of the research community. In most real-world applications, sensors are battery operated, facing the inherent constraint of life duration that is solely dependent on the battery's remaining charge and the node's power profile. A common approach for saving energy in sensor networks is the duty-cycle concept, since overhearing and idle listening are major sources of energy wastage. As a matter of fact, current consumption in idle state is roughly equal to the energy required for receiving a packet through the radio. To this end, sensor nodes are configured to enter a low-power mode, the so-called sleep state, in order to save as much energy as possible during their inactive periods. The sleep state is interrupted by short, burst events, where sensors sense, process and propagate data. It might seem reasonable to neglect energy consumption in the sleep state, since more than three orders of magnitude separate current consumption in sleep and active states. However, given the fact that typical sensor applications operate at quite low duty-cycles ranging from 0.01 % to 1 %, it is expected that both states account for the systems' power budget expenditure. Notably, sleep current is usually in the order of a few μA, which suggests that substantial energy savings can be attained. Apparently, the aforementioned IoT devices feature extreme dynamic range in their power consumption profile, which is rather challenging when it comes to evaluate their behavior, in order to develop energy-efficient schemes and algorithms.A key enabler for studying the behavior of IoT technologies is the creation of a large-scale setup that consist of several individual nodes deployed under realistic conditions, in order to extract as accurate insights as possible. Ideally, the aforementioned setup must be remotely configurable in order to support the execution of different scenarios to aid in the assessment of the under consideration technologies. Over the last years new IoT Low-Power WAN (LPWAN) technologies, such as the LoRa standard have been introduced that promise exceptional communication ranges due to their extremely high sensitivity thresholds.The fundamental questions that we try to answer are the following: 1) Can we apply novel methods in order to drop the power consumption of the state-of-the-art sensors towards extending their life duration on a single charge battery? 2) Can we develop asynchronous networks for awaking specific network's nodes wirelessly in order to surpass the barriers created by the adoption of the duty-cycle concept? 3) Moreover, how is it possible to accurately measure and characterize the power consumption profile of IoT nodes that present wide dynamic range drawing from a few nA when inactive to several mA when being fully activated? and/or to create relevant infrastructure for allowing the power consumption evaluation of relative networking systems? 4) Lastly, how can we evaluate the performance of the recently introduced IoT Low-Power WAN technologies such as the LoRa standard, while also exploit its capabilities so as to aid in the development of application scenarios that require long-range communication standards?Initially, we begin by illustrating a novel power management architecture towards eliminating the power draw of duty-cycled IoT sensing devices during inactive periods. Our principle suggests the employment of an off-chip Real-Time-Clock (RTC) configured to control the power supply of the under consideration mote, by enabling or disabling its power in a power-gating fashion. The selected RTC features an ultra-low power profile and it is the only module that remains powered during sleep, hence the overall mote's consumption is substantially diminished. The proposed principle can be adopted by any commercial or prototyping IoT mote, in order to extend the life expectancy of battery-powered applications, by pushing sleep currents an order of magnitude lower. We remark that the cost of the proposed system is less than 3 euros, while the complexity of the suggested circuitry is trivial. Direct comparison of power draw in sleep state with state-of-the-art sensors illustrates improvements of roughly 98 % - 99.8 }, while we demonstrate that the life expectancy of the same motes can be prolonged from 2.7 years to 19 years under specific duty-cycles.Following this, we focus on asynchronous awakenings in sensor networks towards surpassing the limitations presented in duty-cycled applications. To this end, we propose a new scheme for semi-passive Wake-Up Receiver circuits that attains remarkable sensitivity beyond -70 dBm, while the state-of-the-art receivers illustrate sensitivity of up to -55 dBm. The receiver employs the typical principle of an envelope detector that harvests RF energy from its antenna, while it employs a nano-power operation amplifier to intensify the obtained signal prior to the final decoding that is realized with the aid of a comparator circuit. It operates at the 868 MHz ISM band using OOK signals propagated through LoRa transceivers, while also supporting addressing capabilities in order to awake only the specified network's nodes. The power expenditure of the developed receiver is as low as 580 nA, remaining at the same power consumption levels as the state-of-the-art implementations.As our next step, measuring the power expenditure of sensing devices that illustrate a wide current range. Our meter features an auto-ranging shunt-resistor switch that supports ultra-fast alternations of 10 ns, formed with the aid of high-speed comparators, that can successfully adapt to any sharp transition. Moreover, a high-speed Analog-to-Digital Converter (ADC) with multiple inputs is employed to simultaneously monitor the shunt-resistors, delivering a speed of 150 kSamples/s at 16 bit resolution. The proposed meter can be leveraged for the real-time, as well as the long-term monitoring of IoT devices with its cost being less than 90 euros. Furthermore, the proposed system can actuate or trace state alternations on I/O pins with a maximum delay of 2 μs, in order to provide correlation capabilities with the obtained power measurements. The eProfiler features a wide dynamic range of 1.000.000:1 while also being able to monitor currents of a few nA. The average obtained error of the meter is 0.45 %, with a maximum error of 1.6 %.Next we present a LoRa based city-scale testbed that employs several sensing devices scattered across the urban area to characterize air quality and weather conditions in real-time. The installation is augmented through a custom link quality evaluation framework that continuously monitors the Packet Delivery Ratio versus RSSI relation to characterize the performance of LoRa standard under realistic conditions. Experimental results, collected over a period of 2 months, efficiently analyze LoRa's performance across a wide range of protocol configurations. Finally, we also present in-lab experiments that characterize the efficiency of LoRa modules in terms of power and energy efficiency per bit, along with valuable insights aimed at the development of energy efficient protocol improvements.We follow by presenting the NITOS BikesNet platform, a city-scale mobile sensing infrastructure that relies on bicycles of volunteer users. The BikesNet employs a custom-built embedded node that can be equipped with different types of sensors, and which can be easily mounted on a bicycle in order to opportunistically collect environmental and WiFi measurements in different parts of the city. Experimenters can remotely reserve and control the sensor nodes on bicycles as well as collect/visualize their measurements via the OMF/OML framework, which was extended in order to handle the intermittent connectivity and disconnected operation of the mobile nodes. We also provide a performance analysis of our node prototype in terms of sensing latency, end-to-end data transmission capability and power consumption, and report on a first experiment that was performed using the NITOS BikesNet in the city of Volos, Greece.The next part of our work is focused on the domain of the underwater sensor networks, in which energy efficient operation is of crucial importance. More specifically, we introduce the EVERUN power monitoring framework, consisting of hardware and software components.We integrate the developed system into the Autonomous Underwater Vehicles (AUVs) of the SUNRISE underwater testbed, towards evaluating their operation in terms of energy efficiency. Through the execution of a wide set of experiments under realistic conditions, we highlighted the limitations of model-based energy evaluation tools and characterized the energy efficiency performance of key protocols and mechanisms. The accuracy of the collected power data, along with the interesting derived findings, verified the applicability of our approach in evaluating the energy efficiency performance of proposed solutions.Finally, we present a novel architecture for enabling on-line communication with marine environment monitoring deployments. To this aim, we rely on a set of communication technologies that range from IoT related low data rate communication standards to the widely adopted WiFi and LTE protocols that are able to support bandwidth demanding applications. To achieve energy-efficient operation we turn off all the power-hungry interfaces and peripherals exploiting the power-gating method, while we retain active a low-power long-range interface (LoRa standard), dedicated to control the rest of the components.

Degree

thesis:*
Grantor dc:publisher
University of Thessaly (UTH)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kazdaridis, Ioannis
  • Καζδαρίδης, Ιωάννης

Subjects

dc:subject × 10

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/49793

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kazdaridis, Ioannis; Καζδαρίδης, Ιωάννης. Design, development and performance evaluation of ultra low-power wireless sensor network devices. University of Thessaly (UTH), 2021. http://hdl.handle.net/10442/hedi/49793