Back to search

National Technical University of Athens (NTUA)

Βελτιστοποίηση της ανάπτυξης και τροποποίησης μονοδιάστατων νανοδομών άνθρακα για ενίσχυση προηγμένων νανοσύνθετων υλικών

Abstract

dc:description

Carbon nanostructures and specifically nanotubes and/or nanofibres, are important materials in nanotechnology as the main example of one-dimensional structures. Further development of these nanomaterials, as well as their use in a wide range of applications in the construction sector (shipbuilding, automotive, aeronautics, etc.), depends on their availability at feasible quantities and reasonable cost.The thesis aims at exploring the synthesis, modification and use of carbon nanotubes and/or nanofibers in a wide range of demanding applications. The application of these nanomaterials concerns mainly the construction sector and it is realized by exploiting their excellent physicochemical properties such as mechanical strength and electrical conductivity.The research work is structured in three main pillars: the growth of the carbon nanostructures, their proper chemical modification depending on the application, and finally the evaluation of the properties of the produced nanocomposite material in which nanostructures are used. The three axes are supported by the life cycle analysis principle. The reinforced materials are compared with the conventional ones, not only in terms of performance and functionality, but also of the possible environmental impact during their synthesis, use and application. For this reason, potential effects of carbon nanostructures on human health and ecosystems are also investigated through toxicity studies.The first part of the dissertation is devoted to the growth of the fibrous carbon nanostructures in the most efficient way. For this reason, the thermal catalytic chemical vapor deposition (TC-CVD) has been chosen, which ensures the synthesis of large amounts of carbon nanotubes in a reproducible way, as it allows easy control of operating parameters and demands low energy requirements, compared to other techniques, such as laser ablation or electric arc discharge.For the development of carbon nanostructures, the TC-CVD system of the Research Lab of Advanced, Composite, Nanomaterials and Nanotechnology (R-NanoLab) has been used. Two main routes of developing one-dimensional structures have been considered: the first one is the supported catalyst approach where acetylene is used as the carbon source, and catalysts based on transition metals and porous substrate are synthesised in house. The second route is the floating catalyst approach, in which both the precursor and the catalyst are mixed together and simultaneously introduced into the reactor chamber and as vapours.An extensive sustainability assessment of the aforementioned methods followed, which proves that the supported catalyst approach is more productive and more promising for upscaling. However, the floating catalyst approach may be preferable in special cases, such as the growth of carbon nanostructures on carbon fibres at a one-step process.The dissertation afterwards is focused on the increase of the productivity of the two methods, after modifying the existing CVD system. The main goal was to increase the catalytic surface, which is achieved either by proper placement of the catalyst or by testing different catalysts (for the supported catalyst approach). The carbon nanostructures produced by the tests were extensively characterized and then purified and chemically modified, in order to be used in the selected application.Finally, the results from the use of the produced nanostructures in a range of applications are presented. Specifically, carbon nanotubes and/or nanofibers are incorporated in polymer matrices, such as epoxy resins, and nanocomposites are prepared to test the mechanical and electrical properties. Carbon nanotubes are also tested to organic coatings for enhancement of their antifouling activity. Moreover, nanotubes and/or nanofibres are used in cement-based matrices for mechanical strengthening. Finally, the 1D nanostructures are tested in electronics, and specifically for the development of flexible supercapacitors, by using conductive carbon-based dispersions.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Trompeta, Aikaterini-Flora
  • Τρομπέτα, Αικατερίνη-Φλώρα

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/49864

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Trompeta, Aikaterini-Flora; Τρομπέτα, Αικατερίνη-Φλώρα. Βελτιστοποίηση της ανάπτυξης και τροποποίησης μονοδιάστατων νανοδομών άνθρακα για ενίσχυση προηγμένων νανοσύνθετων υλικών. National Technical University of Athens (NTUA), 2021. http://hdl.handle.net/10442/hedi/49864