National Technical University of Athens (NTUA)
Προσομοίωση των μετασχηματισμών φάσης και της εξέλιξης της μικροδομής σε υποευτηκτοειδείς χάλυβες κατά τη διάρκεια ραγδαίων θερμικών κατεργασιών
Abstract
dc:descriptionThe present Ph.D. thesis investigates the effect of heating rate and short soaking time in hypoeutectoid steel grades. The present thesis focuses on the effect of heating rate on austenitization of the ferrite to austenite transformation and carbide dissolution in order to shed light in the mechanism that lead to mixed microstructures characterized with co – existence of martensite, bainite and retained austenite under certain conditions. For this purpose a conventional heating rate (10oC/s) was examined for comparison purpose to high heating rates (100 – 300oC/s). For both the reheating followed a peak stay at an austenization temperature, Tpeak, ranging between 900 – 1080oC. The soaking time at the selected peak austenitization temperature varies from 2 – 300s. Lab scale rapid thermal cycles were applied via dilatometry. For the lab scale experiments two steel grades were selected, which are widely used in the automotive industry. The hypoeutectoid steel grades are a low alloyed CrMo and a C45 steel. These steels contain ~ 0.4% wt. carbon content while the CrMo steel contains targeted Cr and Mo additions leading to increase in strength via precipitation of complex chromium molybdenum carbides. The C45 steel represents a typical carbon – manganese steel, which has been selected for comparison. The effect of heating rate and short soaking were studied extensively theoreticaly via kinetic simulation of the ferrite-to-austenite transformation and the carbide dissolution and were experimentaly validated. Using thermodynamic simulation techniques the kinetics of phase transformations during heating and short austenitization were studied, while a further investigation regarding the initial simulation of the subsequent during quenching martensitic transformation has been conducted with the aid of phase field modelling. The evaluation and validation of the simulation results were conducted with metallographic analysis of the microstructure using optical microscopy (OM) and electronic microscopy (SEM, EBSD and TEM – EDS) techniques, while preliminary estimation of the strength has been conducted using microhardness measurements. The results of the study revealed that heating rate increase retards carbide dissolution and austenite formation since the required time for C diffusion is greater compared to the available time during heating with rates >100oC/s. In addition, Cr decreases the interfacial movement velocity of cementite/austenite (θ/γ) due to «solute – drag» effect. The increase of Cr addition, as observed in M7C3 carbides, retards even more carbide dissolution and austenite formation. Similar effect with Cr is observed in substitutional alloying elements niobium (Nb) and molybdenum (Mo). The study on coarse carbide dissolution proves that their dissolution and the austenite formation are both impeded as the required distance for C diffusion increases and a greater duration is required for C diffusion. The undissolved carbides impede austenite grain growth and induce chemical heterogeneity in austenite, which may lead to fraction of retained austenite after quenching as estimated using the Koistinen – Marburger equation. Simulation results agree with experimental examination of the microstructure in optical (OM) and scanning electron microscopy (SEM, EBSD, TEM – EDS).
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2020
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bouzouni, Marianthi
- Μπουζούνη, Μαριάνθη
Subjects
dc:subject × 18Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50030