Back to search

University of Patras

Numerical simulation and experimental verification of the mechanical behavior of nanocrystalline materials under nanoindentation and compression uniaxial loading

Abstract

dc:description

Nanocrystalline (NC) metals have attracted a considerable interest over the past twenty years due to their desirable material properties. One of the most attractive features of nanocrystalline materials is their mechanical response. It is generally well-known that, compared with their microcrystalline counterparts, nanocrystalline materials are characterized by enhanced values in terms of yield stress, ultimate tensile strength (UTS), and hardness, while their plastic behavior and fracture toughness usually seem to have decreased values. However, the issue of defining the mechanical response of nanocrystalline materials is still difficult through experimental campaigns. In parallel, technological advances in the hope of the mass production of such materials and several computational efforts for the development of predictive models focusing on the investigation of their mechanical response have been accomplished. By defining the difficulties and remaining problems to solve, in the current doctoral thesis, the mechanical behavior of innovative porous binary nanocrystalline materials has been investigated. In the present Ph.D. thesis, knowing that the aforementioned materials are influenced by imperfections (pores which are mostly located in the area of grain boundaries) due to the manufacturing process and their effect on the overall mechanical response, a Finite Element multiscale procedure was developed in order to simulate the mechanical response of porous nanocrystalline materials which consists of three simulation levels. In the first simulation level, it was assumed that nanocrystalline has not any imperfection (pores) so as to investigate the compression behavior of the ideal full-densed nanocrystalline alloys. In the second simulation level, a porous RVE has been modeled and it is assumed that the pores are randomly distributed and not agglomerated at the grain boundaries’ phase. The volume fraction of alloying elements and their grain boundaries as well as the density and the size of randomly distributed pores has been utilized. The above-said model parameters (grains’ and pores’ sizes, volume fractions of grains and pores) have been calibrated and validated against microstructure characterization measurements (SEM, TEM and XRD analyses). The methodology has been applied to simulate the mechanical response of nanocrystalline materials containing extensive porosity under compression loading. In the third simulation level, a nanoindentation model has been developed. The FE model, in conjunction with a reverse data analysis, allows to create the material’s stress-strain curve on the base of the results of the nanoindentation test. Regarding the nanocrystalline materials, mechanical tests have been performed (compression, hardness and nanoindentation tests) in accordance with ISO and ASTM standards. For the aforementioned mechanical test campaign, 4 different material systems have been investigated in the present Ph.D. thesis and they are listed below: • Cοarse-grained Tungsten-Copper (cW-Cu) alloys • Nanocrystalline Tungsten-Copper (W-Cu) alloys • Nanocrystalline Tungsten-Aluminum (W-Al) alloys • Nanocrystalline Titanium-Aluminum (Ti-Al) alloys Regarding the nanocrystalline Tungsten-Copper specimens, the results showed a significant improvement of yield strength in comparison to their microcrystalline counterparts but the Young’s moduli were degraded due to the extensive presence of porosity. Additionally, the other two batches of nanocrystalline materials (Tungsten-Aluminum and Titanium-Aluminum) have been assessed with their respective microcrystalline counterparts by comparing their results with those from the open literature. Again, the nanocrystalline W-Al and Ti-Al samples presented similar trends compared with the nanocrystalline W-Cu samples following strictly the Hall-Petch effect which is the dominant mechanism on the nanocrystalline materials. According to the comparison of the numerical simulations with the experimental tests, the numerical outcomes, in terms of compression stress-strain curves and the resulting mechanical properties (Young’s modulus and yield strength), correlate well with the experimental results. Both the model and tests reveal that the pores degrade the compressive behavior of the nanocrystalline materials. More specifically, as the volume fraction of pores increase, the results showed a significant decrease of the Young’s modulus. On the other hand, the yield strength followed strictly the Hall-Petch phenomenon since the smaller the grain size the higher the yield strength. The porosity seems to have a small effect on the yield strength. The numerical methodology followed in this simulation level is more realistic on the basis of microstructure of the produced specimens and its numerical outcomes fit well compared to the corresponding experimental results due to the fact that it takes into account the effect of porosity on the overall mechanical response. The proposed multiscale numerical procedure represents a contribution towards the development of a numerical model for the investigation of mechanical response of multiphase porous nano-crystalline materials by varying the volume fraction of alloying elements, the volume fraction of randomly distributed pores and their size and may serve as the basis for the development of macro models to be applied in the quality control of mass production systems of the aforementioned promising materials. It reveals also the promising perspective for an extensive use of nanocrystalline materials on aeronautics and aerospace industry in the near future.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Bazios, Panagiotis
  • Μπάζιος, Παναγιώτης

Subjects

dc:subject × 19

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/50066

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bazios, Panagiotis; Μπάζιος, Παναγιώτης. Numerical simulation and experimental verification of the mechanical behavior of nanocrystalline materials under nanoindentation and compression uniaxial loading. University of Patras, 2021. http://hdl.handle.net/10442/hedi/50066