University of Patras
Residual performance of fire-exposed textile reinforced concrete: experimental investigations and modeling techniques
Abstract
dc:descriptionTextile reinforced concrete (TRC) is a promising composite material with enormous potential in structural applications because it offers the possibility to construct lightweight but strong and sustainable elements. However, despite the reasonably good heat resistance of the inorganic matrices and the well-established knowledge on the high-temperature performance of the commonly used fibrous reinforcements, their application in TRC elements with very small thicknesses makes their effectiveness questionable. The concrete cover protecting the textile reinforcement is an order of magnitude smaller than in the case of steel-reinforced concrete elements. Furthermore, the experimental investigations that have been conducted so far are limited; hence, several knowledge gaps can be identified in the current state-of-the-art. Finally, among the published relevant studies there are large inconsistencies in the testing methods and conditions; thus, it is difficult to draw reliable conclusions about the thermomechanical behavior of the material.This research investigates the residual performance of TRC after exposure to fire via an extensive experimental campaign which provided data on the loadbearing resposne (tensile and flexural) of six TRC compositions, on a wide range of temperatures (20 °C to 700 °C). The six compositions differed by the reinforcing material (carbon or combination of glass and carbon), the sizing of the reinforcement (uncoated, polymer coated or impregnated) and the amount of reinforcement. The novelties of this campaign lie in (i) the quantification of the effect of the textile sizing and the protective concrete cover, (ii) the investigation of the performance of hybrid reinforcement, and (iii) the heat treatment of the specimens with actual fire tests (with durations varying between 7 and 37 minutes). The test results were modeled by analytical and numerical approaches. Existing analytical approaches were used as a tool to describe the behavior of fire exposed TRC in tension, while numerical simulations were developed to model its flexural performance. The novelty of the numerical model lies in the application of a mechanical layer-wise model in combination with a heat transfer model that determines the exposure temperature at every position of a fire-exposed specimen.The thesis concludes that the most decisive parameter for the residual capacity of TRC after exposure to fire is the surface treatment of the reinforcement; uncoated carbon fiber textiles being the best solution (owing to the superiority of carbon fibers at elevated temperature compared to other materials). Polymer coatings lead to faster reduction of the mechanical properties as temperature increases (due to the deterioration of the textile-to-matrix interface as the coating burns) while impregnation with epoxy resins inhibits an increased risk of thermal spalling due to the evaporation of the resin. Based on the provided knowledge, compositions with hybrid reinforcement can also present a favorable behavior with a proper design. This research also shows that the temperature profile of a fire exposed TRC element can be determined with a conduction heat transfer model and, consequently, the flexural performance of the element can be modeled with a layer-wise technique (assigning the predicted temperature to each layer). This modeling technique can be used to simulate correctly the flexural capacity of a heated element. Based on the flexure tests and their numerical simulation it is concluded that the mortar plays a key role too on the residual flexural capacity of fire exposed TRC elements; hence, its contribution should be modeled with accuracy. Finally, this research showed that the applicability of the Aveston-Cooper-Kelly theory can be applied to TRC elements at high temperatures as long as a representative degradation law is adopted. Such a law can be obtained by fitting analytical expressions to experimental results on fire exposed TRC elements tested in tension.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kapsalis, Panagiotis
- Καψάλης, Παναγιώτης
Subjects
dc:subject × 13- Ινοπλέγματα σε ανόργανη μήτρα (ΙΑΜ)
- Συμπεριφορά σε φωτιά
- Υψηλή θερμοκρασία
- Textile reinforced concrete (TRC)
- Textile reinforced mortar (TRM)
- Fire behavior
- High temperature
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Κατασκευή και Οικοδομική τεχνολογία
- Civil Engineering
- Engineering and Technology
- Construction and Building technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50073