Abstract
dc:descriptionSteady-state isothermal rarefied gas flows in long circular channels have been extensively investigated via linear kinetic theory since 1960s, implementing various semi-analytical and numerical schemes. It is noted that linear kinetic modeling is applicable, when the local pressure gradient along the tube is small. This condition is satisfied in the case of long tubes (e.g. the ratio of the length over the radius to be approximately larger than 100), resulting to a low speed isothermal flow even if the overall difference between the inlet and outlet pressure is large. Overall it has been demonstrated that for rarefied gas flows in long channels, linear kinetic modeling, as described by suitable kinetic model equations, may take advantage of all flow characteristics and properties and yield very accurate results in the whole range of the Knudsen number with minimal computational effort. In many applications however, the rarefied gaseous distribution system consists not only of a single channel but of many channels accordingly combined to form a network. Such distribution systems are commonly found in several technological fields including vacuum pumping, metrology, industrial aerosol, porous media, and micro-fluidics. It is pointed out that computational algorithms dedicated to the design of gas pipe networks (e.g., compressed air, natural gas, etc.) in the viscous regime are well developed while corresponding tools for the design of gaseous pipe networks operating under any (e.g. low, medium and high) vacuum conditions are very limited.In order to achieve this, kinetic results obtained for the rarefied flow through each tube of the network are successfully integrated into a typical network algorithm solving the whole distribution system. In particular, for channels with L/Dh>50, where L is the length and Dh the hydraulic diameter, the channel is considered as long and the available kinetic conductance results based on the theory of the infinite long channels are applied. For channels of moderate length 50>L/Dh>5, the end correction theory is introduced. This theory has been recently successfully implemented to define the fictitious increment length which must be added to the channel length in order to provide accurate results for the conductance by taking into account the channel end effects. Thus, the kinetic data base has been enriched with the values of the increment length in terms of the gas rarefaction. Finally, for short channels, i.e. L/Dh<5, the above theory is not valid and depending on the local pressure gradient, extensive simulations based on either linear or non-linear kinetic theory have been performed to provide a complete set of results for the channel conductance in terms of gas rarefaction, pressure difference and channel length. These simulations are computationally very expensive. The complete data base consists of a very dense grid to allow accurate representation of the operational conditions of an arbitrary gas pipe network. Interpolation between the available data points is performed by cubic splines for the flow rates in the case of long channels, by high order curve fitting for the increment lengths for the case of channels of moderate length and trilinear interpolation for the flow rate in terms of the pressure, length and rarefaction in the case of short channels. Next, the enriched data base has been successfully integrated into the network algorithm which is build to cover distribution systems consisting of channels of any length. The developed Algorithm for Rarefied gas flow in Arbitrary Distribution Networks (ARIADNE) includes first the drawing of the network in a graphical environment and then the formulation and solution of the governing equations describing the flow conditions of the distribution system. In the drawing process of the network, the user, through the developed graphical interface, is capable of providing the input data including the coordinates of the nodes in a 3D space, the length and the diameter of the pipe elements, the pressure heads of the fixed-grade nodes and information for the type of the gas and its properties. Even more, the demands (if any) at the nodes may also be provided. Once the geometry of the network is fixed, an iterative process is initiated between the pressure drop equations and the system of mass and energy conservation equations in order to successfully handle gas pipe networks operating from the free molecular, through the transition up to the slip and hydrodynamic regimes. The feasibility and the effectiveness of the developed algorithm is tested by simulating various distribution systems in the hydrodynamic regime and comparing the corresponding results with the ones derived by the typical hydrodynamic solver reporting excellent agreement in terms of the mass flow rate (and the conductance) through the pipes as well as the pressure heads at the nodes of the network. Further more, some preliminary comparisons with ITERVAC, (which is a computational tool for the estimation of the mass flow through ducts at isothermal conditions in a wide flow regime, however, it is based mainly on empirical expressions), for networks consisting of long channels resulted to very good agreement between the two approaches. It is hoped that the present work will constitute a significant part of a more general algorithm which will be used as a significant engineering tool in the design and optimization of gaseous distribution networks operating under any rarefied conditions.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Misdanitis, Serafeim
- Μισδανίτης, Σεραφείμ
Subjects
dc:subject × 18- Κινητική θεωρία
- Δυναμική αραιοποιημένων αερίων
- Τεχνολογία κενού
- Τεχνολογία σύντηξης
- Μικρό - ρευστομηχανική
- Δίκτυο Διανομής αερίου
- Kinetic theory
- Rarefied gas dynamics
- Vacuum technology
- Fusion technology
- Microfluidics
- Gas distribution system
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανολογία
- Mechanical Engineering
- Engineering and Technology
- Mechanics
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50149