Back to search

National Technical University of Athens (NTUA)

Numerical investigation of the tunnel face stability

Abstract

dc:description

The present PhD dissertation investigates the tunnel face stability in cases of shallow and deep tunnels. The investigation is based on more than 1600 parametric 3D numerical analyses using the Simulia ABQUS finite element code. As the tunnel face behavior is a complex three - dimensional problem, and the working mechanism of the tunnel face support measures extend in the third dimension in front of the tunnel face, three dimensional (3D) numerical models are required to investigate the tunnel face stability.In order to investigate the tunnel face stability, the tunnel face extrusion (average axial displacement over the tunnel face) was calculated. When the tunnel face extrusion increases rapidly, the tunnel face tends to be unstable and approaches collapse. In the present investigation, the tunnel face extrusion is described by the non – dimensional tunnel face extrusion parameter (Ωh) which is correlated with a non – dimensional ground factor (Λο) which takes into account the ground properties and the tunnel geometry. The present investigation, examines the tunnel face stability by studying the following fields: a) soil and rockmass strength (strength and modulus of deformation) b) geometrical characteristics of the excavation (diameter, overburden) c) tunnel face support measures. In cases of shallow tunnels, the Mohr Coulomb failure criterion describes the ground response of soils, while in cases of deep tunnels the Generalized Hoek & Brown (2002) failure criterion describes the ground response of rockmass. In both cases, the ground behaves as an elastic – perfectly plastic material (perfect plasticity).Finally, in cases with tunnel face pre – support (forepoling umbrella or fiberglass nails) the equivalent deconfinement ratio (λ) is calculated in order to transform the complex three-dimensional (3D) problem of the tunnel face pre – support, in a simple two – dimensional (2D) numerical problem.The PhD dissertation consists of the following sections:Section 1: Scope of the dissertation.Section 2: Presentation of the main tunnel excavation methods (conventional, mechanized) and the tunnel design methods (design guidelines and convergence - confinement method). Section 3: Presentation of the tunnel face behavior due to the tunnel excavation and the proposed method for the tunnel face pre – support. In addition, previous researches in the tunnel face stability investigation are presented. Section 4: Presentation of the numerical models and the basic parameters of the present research. Moreover, the simulation of the forepoling umbrella is presented. Section 5: Investigation of the tunnel face stability, in cases of unsupported tunnel face. The tunnel face extrusion is correlated with the ground strength of the surrounding mass and the dimensions of the underground excavation. Moreover, the effect of the tunnel face extrusion in the formation of the plastic zone and the tunnel convergence, is examined. Section 6: Investigation of the tunnel face pre – support by forepoling umbrella, in order to estimate the reduction of the tunnel face extrusion and the tunnel convergence .Moreover, the equivalent deconfinement ratio (λ) is calculated in case of using the forepoling umbrella for the tunnel face pre – support. Section 7: Investigation of the tunnel face reinforcement by fiberglass nails, in order to estimate the reduction of the tunnel face extrusion and the tunnel convergence. Moreover, the equivalent deconfinement ratio (λ) is calculated in case of using the fiberglass nails for the tunnel face refinement.Section 8: Investigation of the tunnel face pre-support by forepoling umbrella and fiberglass nails combination, in order to estimate the reduction of the tunnel face extrusion and the tunnel convergence.Section 9: Investigation of the tunnel face excavation area, in the reduction of the tunnel face extrusion in cases of unsupported or supported tunnel face.Section 10: Correlation between the tunnel face extrusion and the famed surficial settlements, in cases of shallow tunnels.Section 11: Conclusions and recommendations for future work

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Georgiou, Dimitrios
  • Γεωργίου, Δημήτριος

Subjects

dc:subject × 13

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/50178

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Georgiou, Dimitrios; Γεωργίου, Δημήτριος. Numerical investigation of the tunnel face stability. National Technical University of Athens (NTUA), 2021. http://hdl.handle.net/10442/hedi/50178