Back to search

Institutes outside Greece

High output resistance current drive circuits for medical applications

Abstract

dc:description

The research described in this thesis is concerned with the analysis, design and development of high output impedance current drive circuits for medical applications. These circuits are used in medical systems such as Electrical Impedance Tomography (EIT) imaging. The target specification for EIT was an output impedance in excess of 1MΩ at 1MHz. Several different current output circuits have been studied together with a variety of circuit techniques which increase the level of output impedance to achieve this objective. All the circuits reported here are bipolar junction transistor level implementations and have been examined using theoretical analyses, and circuit simulation using SPICE. The majority of the results of this work have been reported by the author in the technical literature.The thesis begins with a study and some initial measurements in order to determine the applicability and suitability of the SPICE transistor model parameters. This was necessary because the output impedance target means that second order effects cannot be neglected. The results of this work led to novel methods of determining rμ of the transistor, and were subsequently published by the author.The next part of the thesis focuses on a review of traditional current output circuits and a critical analysis of their performance and their suitability for medical applications. One unusual circuit, published by Baxandall and Swallow in 1966 (B&S) originally intended for audio applications, was of particular interest. These authors demonstrated that their circuit exhibited a much higher output impedance, in excess of 200MΩ over traditional current source designs. Based on this topology author of this thesis reports a novel current output drive circuit capable of achieving a low frequency output impedance in excess of 200GΩ at 1Hz.Finally, a transistor level high output impedance current drive circuit design which is ideally suited for ASIC realisation was developed and studied in detail. In this novel architecture a current sensing technique was used in a feedback loop employing an op-amp and modified configurations based on a core B&S circuit. The output impedance far exceeded the EIT specification of 1MΩ at 1MHz. This work has also been published by the author.

Degree

thesis:*
Grantor dc:publisher
Institutes outside Greece
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Terzopoulos, Nikolaos
  • Τερζόπουλος, Νικόλαος

Subjects

dc:subject × 11

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/50356

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Terzopoulos, Nikolaos; Τερζόπουλος, Νικόλαος. High output resistance current drive circuits for medical applications. Institutes outside Greece, 2006. http://hdl.handle.net/10442/hedi/50356