Institutes outside Greece
Tissue equivalent X-ray dosimetry based on carbon nanotubes
Abstract
dc:descriptionAdvances in Nanotechnology enable us to structure new materials at the nanoscale and develop novel systems capable of active response of X-rays and sensing humidity. The addition of Carbon Nanotubes (CNTs) to various polymers enhances the electrical conductivity even at small filler loading, making them suitable for sensor manufacturing. Polymers have a low average atomic number, which makes them equivalent to human tissue when used in X-ray dosimetry in clinical applications. Carbon nanomaterials are two-dimensional sheets of sp^2-hybridised Carbon atoms. Devices based on Carbon nanomaterials are a promising technology for the future as they are tissue-equivalent materials with high levels of miniaturisation, the possibility of high scale manufacturing and incorporation into electronic components. CNTs are ideal candidates for future multi-functional constituents for X-ray detection and therefore their role in regulating the electrical and sensing properties of polymer composites is studied. The effects of 0.20 Gy and 0.45 Gy X-rays radiation on Single-Wall Carbon Nanotubes (SWCNTs) are studied in order to explore their use as miniaturised and highly sensitive radiation detectors. Scanning Electron Microscopy (SEM), Raman Spectroscopy and X-ray Photoelectron Spectroscopy (XPS) are employed for the characterisation of the effects. HiPCo SWCNTs are sensitive to X-ray radiation leading to materials with enhanced oxygen content and radiation-induced sp^3 defects. The degradation of neat polymers due to X-rays is also discussed.The spinning and characterisation of CNT-PVA fibres fabricated using a continuous coagulation technology and CNT only fibre are described. Variations in spinning parameters (such as injection rate, coagulation bath rotation speed, and coagulation flow rate) and coagulation bath properties (such as the pH of the coagulation solution) are also studied as they dramatically affect the strength and the morphology of the fibre. Various properties of the resulting fibres as a function of process variables are characterised using techniques such as mechanical strain, electrical conductivity, optical spectra (UV to far IR regions), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), Raman spectroscopy, Fourier-Transform Infrared Spectroscopy (FTIR), conducting Atomic Force Microscopy (c-AFM), Kelvin Probe Force Microscopy (KPFM) and X-ray Photoelectron Spectroscopy (XPS) are studied. CNT-PVA fibres have been used as X-ray radiation dosimeters. Photocurrent measurements as a function of time were performed on the fibres as they were irradiated with an X-ray beam at different dose rates from 0.0003 Gy⁄h to 76.89 Gy⁄h, where the dose rate was determined by the distance of the devices to the X-ray tube. The degradation of the fibres by up to 226.8 Gy X-rays was also extensively studied by Raman spectroscopy, XPS and Differential Scanning Calorimetry (DSC) among other techniques. By incorporating these fibres into textiles, it should be possible to develop smart materials for active dosimetry clothing, capable of measuring whole-body radiation dose for workers in the nuclear industry. These CNT-PVA fibres also directly responded to high humidity by undergoing swelling. X-ray detectors of colloidal nanocomposites that develop tacky behaviour were also developed. The Latex used in this study possesses a glass transition temperature of -50℃ and therefore it is tacky and soft at room temperature. DC and AC conductivity measurements showed that the electrical properties were enhanced after the incorporation of SWCNTs. The X-ray detection of a polymer colloid upon the addition of a small amount of SWCNTs was enhanced, due to the efficient charge separation at the interface of the latex and the SWCNTs and the tack properties were also higher as CNTs enhance fibrillation. Irradiation with X-rays produced a linear increase in photocurrent over a dose rate range from 0.18 to 54.99 mGy⁄s. A low concentration of 0.1 wt.% CNTs provided enough pathways to collect the carriers at the electrodes. AFM, Raman, FTIR and XPS characterisation indicated that the sample with the best X-ray response, the 0.1 wt.% CNTs-Latex was not degraded under 0.45 Gy X-rays.This PhD thesis aims to propose alternative tissue-equivalent X-ray detectors based on CNT-polymer fibres or Pressure Sensitive Adhesives (PSAs) CNT-Latex. A thorough understanding of the mechanism behind the X-ray detection and the radiation-induced chemistry at the interface of the host polymer and the CNTs are portrayed. These composite devices present radiation resistance, in contrary to SWCNTs and polymers. Although the resulting devices are low cost, they have a relatively high detection efficiency and may provide large surface area detection as a viable alternative to more traditional device materials for tissue-equivalent dosimetry.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bardi, Niki
- Μπάρδη, Νίκη
Subjects
dc:subject × 20- Νανοσωλήνες άνθρακα
- Ίνες νανοάνθρακα
- Δοσιμετρία ακτίνων Χ
- Σύνθετα νανοϋλικά
- Carbon nanotubes
- nanocarbon fibers
- X-ray dosimetry
- composite nanomaterials
- Φυσική
- Φυσικές Επιστήμες
- Εφαρμοσμένη φυσική
- Νανοτεχνολογία
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοεπιστήμη και Νανοτεχνολογία
- Physical Sciences
- Natural Sciences
- Applied Physics
- Nano-Technology
- Engineering and Technology
- Nanoscience and Nanotechnology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50367