Back to search

National Technical University of Athens (NTUA)

Self-consistent field theory of inhomogeneous homopolymers and grafted polymers

Abstract

dc:description

The exponential growth of computational resources over the past decades, combined with the advent of models and advanced computational tools, have assisted significantly in guiding the design of improved polymer materials of high technological importance in a broad range of industrially relevant applications. Atomistic simulations have assisted a great deal in understanding elusive microscopic phenomena manifesting themselves at polymer interfaces and of their mechanisms and in establishing structure-property relations; they have a drawback, however, namely their high computational cost. Mesoscopic simulations, on the other hand, employ a higher level of description and are quite useful in studying a variety of important systems and phenomena at mesoscopic time- and length-scales, albeit the task of parameterizing the effective interactions between coarse-grained segments is rather complicated. There is an alternative strategy, however, which is the primary focus of the present thesis: field-theoretic methods. To carry out a field-theoretic computer calculation, we require a statistical field theory model of a fluid. A statistical field theory is a description of a system in which the fundamental degrees of freedom are not particle coordinates, but rather one or more continuous fields that vary with position. More specifically, we focus on one of the most successful theoretical frameworks for inhomogeneous polymeric systems, the so-called self-consistent field theory (SCFT). Our primary goal is to formulate, validate and develop SCFT approaches, and then apply them in the description of interfacial systems involving high molar mass polymer melts under equilibrium conditions.The SCFT models of this research will comprise three main stages:1.Validation. The aim of this procedure is to allow for a comparison of the field theoretic model with previous atomistic simulations and experimental works in a rigorous and predictable manner. This is a key step to ensure that the theoretical models can successfully describe realistic systems.2.Structural properties. This will be the phase where the SCFT will be used to compute structural properties of bulk and inhomogeneous melts under equilibrium conditions.3.Thermodynamic calculations. This is the highest goal of the theoretical strategy presented in this thesis. Through these calculations we will be able to determine measurable thermodynamic properties and behavior of high molar mass polymer/gas and polymer/solid interfaces.A self-consistent field (SCF) theoretic approach, using a general excess Helmholtz energy density functional that includes a square gradient term, is derived for polymer melt surfaces and implemented for linear polyethylene films over a variety of temperatures and chain lengths. The formulation of the SCF plus square gradient approximation (SGA) developed is generic and can be applied with any equation of state (EoS) suitable for the estimation of the excess Helmholtz energy. As a case study, the approach is combined with the Sanchez-Lacombe (SL) EoS to predict reduced density profiles, chain conformational properties, and interfacial free energies, yielding very favorable agreement with atomistic simulation results and noticeable improvement relative to simpler SCF and SGA approaches. The new SCF/SL+SGA approach is used to quantify the dominance of chain end segments compared to middle segments at free polyethylene surfaces. Schemes are developed to distinguish surface-adsorbed from free chains and to decompose the surface density profiles into contributions from trains, loops, and tails; the results for molten polyethylene are compared with the observables of atomistic simulations. Reduced chain shape profiles indicate flattening of the chains in the surface region as compared to the bulk chains. The range of this transitional region is approximately 1.6 times the radius of gyration (Rg). The inclusion of chain conformational entropy effects, as described by the modified Edwards diffusion equation of the SCF, in addition to the square gradient term in density, provides more accurate predictions of the surface tension, in good match with experimental measurements on a variety of polymer melts and with atomistic simulation findings.A model for the prediction of key structural and thermodynamic properties of Polymer matrix nanocomposites (PNC) is described. Our approach is applied to single spherical silica (SiO2) nanoparticles or planar surfaces grafted with polystyrene chains and embedded at low concentration in a matrix phase of the same chemical constitution. Our model is based on self-consistent field theory, formulated in terms of the Edwards diffusion equation. The properties of the PNC are explored across a broad parameter space, spanning the mushroom regime (low grafting densities, small NPs and chain lengths), the dense brush regime, and the crowding regime (large grafting densities, NP diameters, and chain lengths). We extract several key quantities regarding the distributions and the configurations of the polymer chains, such as the radial density profiles and their decomposition onto contributions of adsorbed and free chains, the chains/area profiles, and the tendency of end segments to segregate at the interfaces. Based on our predictions concerning the brush thickness, we revisit the scaling behaviors proposed in the literature and we compare our findings with experiment, relevant simulations, and analytic models, such as Alexander’s model for incompressible brushes.Finally, a method is formulated, based on combining self-consistent field theory with the finite element method (SCFFEM), for studying structural and thermodynamic features of three- dimensional polymeric systems. Initially, this approach is tested on a planar polyethylene/vacuum and a polyethylene/graphite system, hand in hand with atomistically detailed molecular simulations as well as with one dimensional SCF approaches. This new approach is employed to predict reduced density profiles and interfacial free energies, yielding very favorable agreement with previous SCF studies, thus validating the SCFFEM methodology. An h-, r-, p- refinement process is developed to optimize the finite element mesh. Furthermore, two new criteria and an innovative successive substitution scheme are introduced for accurate convergence. The methodology is employed on a more complicated system consisting of polystyrene brushes grafted on silica walls immersed in polystyrene melt. In most implementations, the grafted chains are dealt with by smearing them across shells parallel to the surface of the modeled nanoparticle. The SCFFEM approach allows to distinguish the positions where the grafted chains are tethered, since it does not employ any smearing. The reduced density profiles are compared against the end-segment distributions along specific lines in the system. The structural properties and grand potential contributions are obtained for a broad range of grafting densities, molar masses and swelling ratios (i.e., ratio of the matrix to the grafted chains), and are compared to experimental data, theoretical models, and earlier simulation studies.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Lakkas, Apostolos
  • Λάκκας, Απόστολος

Subjects

dc:subject × 20

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/50413

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Lakkas, Apostolos; Λάκκας, Απόστολος. Self-consistent field theory of inhomogeneous homopolymers and grafted polymers. National Technical University of Athens (NTUA), 2021. http://hdl.handle.net/10442/hedi/50413