Institutes outside Greece
Implementation of CAD-based and 3D non-linear finite element methodologies on modelling of machining processes
Abstract
dc:descriptionMaterial removal is one of the most important shaping processes in the industry. Moreover, a wide variety of products spanning from a simple hand tool to an aircraft part can be produced via machining. These significant facts along with the constant need for evolution in engineering became the foundation for the present thesis. The primary objective during research and development in the FEM-based machining area, focus on: increasing the accuracy of the developed FE models, reducing the preparation time and minimizing the required experimental work.In order to achieve the high standards and to ensure the reliability of the cutting processes, new methods of theoretical analysis must be determined. Additionally, new simulation models are required to cover the continuous development of cutting tools. In the light of these considerations, an extensive literature survey was carried out as a first step towards the deeper understanding of previous works in the field. Next, the processing of the findings revealed certain topics that required further investigation or improvement. Such topics include: The accuracy improvement during FE modelling. The investigation for the effect of critical machining conditions on several parameters such as the developed cutting forces, the chip morphology, as well as the stress and the temperature distribution. And the establishment of efficient and user-friendly prediction models.Upon finalizing the literature survey, the research was divided into four stages. The first stage is associated with the enhancement of the accuracy in FE modelling. The second one deals with the FE modelling of drilling and turning operations in three dimensions, assisted with CAD-based techniques. The third stage is related to the machining investigation into industrial materials under critical cutting conditions. Finally, the last one presents the development of prediction models with the aid of statistical methodologies.1) Most researchers use in their studies either cutting tool models provided by manufacturers or design them by themselves. However, in the first case it ispossible that the yielded simulation results may be of low accuracy, due to the fact that the models downloaded from a manufacturer’s site are usually simplified and often miss critical geometric characteristics. In the latter, the researcher may be forced to spend hours for repetitive design tasks that could be frustrating, especially when design errors occur. To avoid confusions and to focus on more creative tasks, an application for the automated design of cutting tools was designed and developed with the aid of Application Programming Interface (API) of SolidWorks™ CAD system. In this stage, the programming resources of SolidWorks™ were employed, combined with the parametric design strategy so that the conception of the application could be achieved.2) With the finalization of the application, a number of 3D FE models were prepared and the equivalent cutting tools were generated for testing purposes. The simulation tests completed successfully and the acquired results revealed an increased correlation with the corresponding experimental results. Later, similar FE models for drilling and turning were set, according to findings and recommendations from already published works, by using modern FEA software,namely DEFORM™-3D. The material properties, the damage evolution, the friction approximation, as well as the thermal flow, were all set with respect toexperimental work carried out during this research, in addition to the findings that were published by experts in the field. Furthermore, an effort to simplify the machining problems was made, by employing several well-established strategies such as the CAD-assisted configuration of the tool-workpiece interface and the mesh refinement localization.3) The third stage of the thesis is directly linked to the previous one. The acquired simulation results were processed with the aid of computing environments such as Excel™ and MATLAB®, so that the results can be converted into usable data sets. Later, the processed data were visualized and compared directly toequivalent findings that are available in the literature. This comparison showed that the developed FE models were in agreement with the ones found in already published studies. Furthermore, a number of experimental tests were carried out to further validate the accuracy of the developed FE models. In order to accurately perform the experimental work, a CNC machining center was utilized along with the measuring equipment (i.e. dynamometer). At the same time, an investigation regarding the effects of cutting speed, feed, depth of cut and tool geometry on the developed cutting forces was conducted. Specifically, the thrust forces generated during drilling were studied, as well as the machining components (radial, tangential and feed forces) induced during turning. In addition, both the chip evolution and morphology were studied with respect to the applied operation, material, tool and cutting conditions.Finally, the verified simulated results were used for the development of mathematical models that can predict the generated cutting forces within specific limits. The models that were represented by polynomial functions, can generate results of high accuracy instantly and without the need of any specialized software. The modelling was performed by utilizing the broadly used Response Surface Methodology (RSM), which in addition enhanced the visualization of the investigation concluded during stage three. To further strengthen the validity of the statistical models, the Analysis of Variance (ANOVA) was employed. Results from the analysis revealed that the developed models are robust and can be safely used for prediction purposes.The publication entitled “CAD-based automated design of FEA-ready cutting tools” presents an application for the automated generation of cutting tool models that can be directly imported to most commercially available FEA software. The application was developed by exploiting the programming resources of the API of SolidWorks™ and can cover a wide variety of cutting tools used in the turning processes. Additionally, it can be extended to generate more sets of tools by editing a fraction of the code. Moreover, the design procedure follows the proposed algorithm that is based on the parametric design technique.The published paper with title “FEM based mathematical modelling of thrust force during drilling of Al7075-T6” presents a 3D FE model for drilling of Al7075-T6, under a range of conditions that are recommended by most tool manufacturers. In addition, the selected aluminium alloy demonstrates excellent mechanical properties and is often used in the aerospace industry. Except the presentation of the FE model, the paper investigates the effects of the applied conditions and tool diameter on the generated thrust forces, as well as the produced chip formation with the aid of DEFORM™-3D and several computing tools and methodologies. In fact, the effects were graphically presented by using the RSM and additionally, a prediction model for the thrust forces was developed, which was verified with ANOVA. Finally, the paper describes the experimental work that was conducted to validate the numerical model.The publication entitled “3D FE modelling of machining forces during AISI 4140 hard turning” proposes a schematic in three dimensions for hard turning of AISI-4140 steel. The chosen material is another commonly used metal in the manufacturing industry. Moreover, the selected cutting conditions meet the manufacturer’s standards and recommendations. At the same time, this publication presents a statistical model for prediction purposes of the generated machining forces by using similar methodologies to the previously mentioned publication “FEM based mathematical modelling of thrust force during drilling of Al7075-T6”. Furthermore, a study on the performance of the cutting tool is included, according to the selected cutting speed, feed and depth of cut.Further investigation into the behavior of AISI-4140 steel during turning was conducted in the paper “Influence of the nose radius on the machining forces induced during AISI-4140 hard turning: A CAD-based and 3D FEM approach” to provide a better understanding of the induced turning force components, the chip morphology and formation. During this research, emphasis was given on the microgeometry of the tool models. For this reason, the CAD-based application presented in the paper “CAD-based automated design of FEA-ready cutting tools” was utilized. In addition, a CAD-assisted method was selected for the process layout setup. The paper contains findings regarding the influence of the cutting conditions on the induced turning forces, as well as theperformance of the cutting tools in terms of their microgeometry. Moreover, both a numerical and a statistical model of high accuracy are proposed.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tzotzis, Anastasios
- Τζώτζης, Αναστάσιος
Subjects
dc:subject × 23- Μηχανουργικές κατεργασίες
- Μη γραμμική ανάλυση με πεπερασμένα στοιχεία
- Συστήματα CAD
- Αριθμητική θερμομηχανική μοντελοποίηση 3D
- Εργαλειομηχανές CNC
- Κοπτικά εργαλεία
- CAD based systems
- Finite element analysis
- Machining processes
- Numerical modelling
- 3-D nonlinear numerical analysis
- Response surface methodology
- CNC machine tools
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανολογία
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Οργάνωση παραγωγής και Μηχανική των κατεργασιών
- Mechanical Engineering
- Engineering and Technology
- Mechanics
- Other Engineering and Technologies
- Industrial and Manufacturing Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50541