Aristotle University Of Thessaloniki (AUTH)
Investigation of power generating turbine characteristics for low enthalpy organic Rankine cycles
Abstract
dc:descriptionIn the present dissertation the real gas effects on the design of supersonic power production turbine for low enthalpy Organic Rankine Cycle (ORC) is studied. The blading design for both stator and rotor is performed by applying non-ideal gas models used in Aerospace engineering for supersonic nozzles development for space aircraft applications. Over the last decades, a surge in consumption of fossil fuels has led to serious environmental problems such as global warning protection, destruction of ozone layer and atmospheric pollution. For these reasons, an increasing trend in exploitation of low-enthalpy heat sources in the field of power production from waste heat recovery, has gained renewed interest. Towards to this direction, Organic Rankine Cycle systems have proven to be a very promising solution to avoid aggravation of this problem. ORC systems operate with heavy and molecular complex organic substances as the working fluid, which results to completely different design concept of the turbine compared to either standard gas or steam turbine designs. Also, during dry expansion, these fluids are close to dense gas region (on the right side of the saturation line) where the speed of sound is low. This means that supersonic turbines with high-expansion-ratio must be used to ensure efficient performance (≥75%) of the power production turbine. On the other hand, the designers should be aware of the generated shock and expansion waves within blades passages, because of supersonic conditions, that enhance losses. The goal of the present study is to develop an integrated model of equations to enable the user to design the thermodynamic cycle through the assessment of the available heat source and propose to user the most optimal working fluid for maximum useful power extraction. Based on the selected medium, the algorithm may proceed with the geometry optimization of the turbine and the blading design for both stator and rotor takes place. For shock wave losses minimization, the “Method of Characteristics” is used. Finally, the generated geometries were tested in a steady viscous numerical simulation by using a CFD commercial software. The numerical results were further validated with the experimental results of the “water table” test rig which was built for the purposes of this study in the premises of the Laboratory of Fluid Mechanics and Turbomachinery of the Aristotle University of Thessaloniki. Flow visualization experiments took place on the “water table” in order to observe and verify the existence of the shock waves on the desirable position inside the blade passages. Moreover, an experimental setup that consists of a pipeline network was constructed in order to test the innovative, non-invasive developed method for pipe leakage detection and localization, since the environmental protection is the ultimate goal of this study. Finally, a novel working fluid consisting of isobutane and isopentane has been proposed and investigated by applying the Navier-Stokes (RANS) method which uses equation of state for dense gases. The obtained results indicated that ORC’s thermal efficiency may reach 13.9% while it operates in maximum power output and the total-to-total turbine efficiency is 82.65%.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Efstathiadis, Theofilos
- Ευσταθιάδης, Θεόφιλος
Subjects
dc:subject × 16- Ανάκτηση θερμικής ενέργειας
- Οργανικός κύκλος Rankine (ORC)
- Σχεδιασμός υπερηχητικού στροβίλου
- Χωροταξικός εντοπισμός διαρροών
- Waste heat recovery
- Organic Rankine cycle (ORC)
- Supersonic turbine blades
- Leakage detection and localisation technique
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Αεροδιαστημική μηχανική
- Θερμοδυναμική
- Mechanical Engineering
- Engineering and Technology
- Aerospace Engineering
- Thermodynamics
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50560