Back to search

National Technical University of Athens (NTUA)

Συμπεριφορά κατασκευών υπό τυχηματικές δράσεις και επισκευή με προηγμένα υλικά και τεχνολογίες

Abstract

dc:description

Existing structures are not designed to withstand impact loading. The term impact loading refers to loads from unexpected causes like explosions, impact loading from bullets etc., for which there is no provision from existing codes because the relevant strength of the building materials has not been studied thoroughly. This study aims to contribute to the upgrade of existing and new structures to ensure that they have the required resistance from firearms. Especially in cases of buildings of great importance for the society (i.e., hospitals, military camps, airports etc.) the protection from the impact of firearms becomes a necessity. The subject of this dissertation thesis is the study of the impact load from a projectile impact, the response of structures to such load and the examination / optimization of the required mechanical characteristics of Ultra High Performance Fiber Reinforced Concrete (UHPFRC). UHPFRC mixtures are examined against impact load from a projectile impact to determine small dimensioned prefabricated slabs, on which the formation of brittles is minimized and perforation is avoided, for use on new constructions as well as existing ones as a reinforcement material.An extensive experimental investigation was conducted and the influence of parameters regarding the mix design were examined in order to thoroughly describe the mechanical properties of an UHPFRC that provides optimal resistance to projectile impact.Specifically, fourteen different mixtures were produced and tested: four mixtures of Ultra-High-Performance Concrete (UHPC), nine mixtures of UHPFRC and one High Strength Concrete (HSC). The different mixtures of UHPC and UHPFRC were composed by changing the amount and length of the steel fibres, the quantity of the superplasticizer, and the water to binder (w/b) ratio. The compressive strength, direct tensile strength, flexural tensile strength, modulus of elasticity, and Poisson’s ratio from compression and direct tension were measured. Also, full stress–strain curves from compression, direct tension, and flexural tests were obtained to examine the influence of the above parameters on the mechanical properties. Based on the test results the optimum UHPFRC best suitable for impact loading was chosen. Moreover, the mixtures with the best characteristics were used to produce slabs with dimensions: 200x200mm and thickness of 15, 30, 50 and 70mm. These were tested under projectile impact. The penetration depth and material volume loss were measured and the failure mechanisms were investigated in order to find the minimum thickness which prevents perforation from occurring. Finally, the concrete damage plasticity model in ABAQUS was used for the numerical simulation of a three-point flexure test using the material properties obtained from this research.Based on the test results, the mixture with high volume (6%) and a combination of two lengths of steel fibres (3% each), water to binder ratio of 0.16% and 6.1% of superplasticizer to binder ratio exhibited the best mechanical characteristics and the best resistance to projectile impact loading. Only the 15 mm thickness slabs suffered perforation under projectile impact. This material can be used as an overlay surface placed on steel frames which can be attached to existing walls or to construct small precast guardrooms to provide protection from terrorist attacks.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Mina, Anna
  • Μηνά, Άννα

Subjects

dc:subject × 17

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/50640

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Mina, Anna; Μηνά, Άννα. Συμπεριφορά κατασκευών υπό τυχηματικές δράσεις και επισκευή με προηγμένα υλικά και τεχνολογίες. National Technical University of Athens (NTUA), 2021. http://hdl.handle.net/10442/hedi/50640