University of Thessaly (UTH)
Αξιοποίηση των υπολειμμάτων καλλιεργειών για παραγωγή ενέργειας
Abstract
dc:descriptionThe aim of this study was to investigate the movements of the machinery which were involved in the cotton residues collection. The cotton residues were used by a cement factory as a raw material for energy production.The fleet management of the machinery which was involved in the cotton residues collection was studied. The cotton residue collection is mainly based on the experience of the contractor. The study was designed to determine if the contractor's experience perform the collection efficiently or scheduling tool is needed to organise work more efficiently as regards the cost and timeThe purpose was to create suitable prediction tools for the time and the costs of the cotton residue collection.For this purpose a cotton residue contractor was chosen and the work of his machinery was recorded. The collected data refered to the performance of the machines of the process of harvesting of cotton residue. Two experiments were took place in Almiros Magnesia region. A preliminary experiment took place to determine if the collection procedure was efficient. The operational data of the machines were collected during the main experiment. During the second experiment, data were collected from 41 fields in 30 days.The data collection for the movement of machinery was recorded with low-cost GPS receivers. The data recorded was for the field work and the overall work i.e. including travelling from the depot to the field and from field to field. The cotton residue collection process consists of four sub-work 1) The cutting 2) the raking 3) the baling 4) the loading. The GPS receivers were able to record the operational times of machinery during their work. Data analysis followed:An algorithm was developed to estimate the operational times of the machinery during the cotton residues collection. The field time, the field preparation time, the working time, the turning time, the delay time ,the baling time, the field capacity of the machines were estimated.An algorithm was developed to optimize the total time of the collection. The whole process was considered as a flow shop problem. The data of the first experiment was analyzed and a software was developed. The software created a sequence scenarios for the machines itinerary to harvest a number of geographically dispersed fields. The biomass collection sub-operations were conducted sequentially. The aim was to find the scenario which the collection of residue was carried out at the minimum total time.The mathematical models were created for the prediction of the field time for each machine. The creation of the models was developed with tools as regression analysis. Regression analysis is a linear model and was used for modeling and analysis of numerical data of a quantitative dependent variable and some independent variables. The model is a correlation function of the dependent variable and the independent variables. As dependent variable was the field time. As independent variables were the area of the field, the perimeter, the complexity of the field, the cotton yield and the amount of the residue (number of bales).The results of the implementation of the algorithm were compared with the contractor's strategy. The total collection time was improved 9.8%The field capacity was compared with data available in the databases of ASABE and Kuratorium fu¨r Technik und Bauwesen inder Landwirtschaft (KTBL).The measured capacity of cutting was 20% higher than the average of the results of KTBL and 15% lower than the average of the results ASABE. The measured capacity of raking was 16% higher than the average of the results as estimated by the KTBL and 21% lower than the average of the results as estimated from the data of ASABE . The measured capacity of baling was 8% higher than the average of the results as estimated by KTBL details and 2% higher than the average of the results as estimated of ASABE details.Finally, three different scenarios for the process of cotton residue collection were studied. The three scenarios were concerning on the availability of tractors carrying out the sub operations of the collection of cotton residues. In the first scenario, the availability concerned four tractors. Therefore, all four sub-operations were executed sequentially. In the second two operations (cutting and raking) were executed. Then the baling and the loading operations were executed. The availability concerned two tractors. The third scenario concerned the availability of three tractors. Firstly, the cutting, raking and baled were executed and then the loading operations was executed. The cost for the each scenarios was estimated. The structure of the study is as follows:The study consists of seven chapters.In the first chapter, the introduction, reference is made to the importance of biomass as raw material for energy production. Also reference is made to environmental problems resulting from the use of fossil fuels.In the second chapter, the literature of the biomass from agriculture and the literature of biomass properties were analyzed.In the third chapter, the literature on the general principles of the supply chain to the factors that influence it were presented. Particularly, the chapter refers to the stages of the supply chain of biomass from the field to the power plant and the machinery which was used to collection of the cotton residues.In the fourth chapter, the experiments and the methods used for data analysis were described .In the fifth chapter, the results of experiments and the creation of forecasting models were described .In the sixth chapter (case study), three different scenarios for the cotton residue collection were described. The scenarios were concerned to the availability of tractors that carrying out the work of cutting , raking , baling and loading.In the seven chapter, the conclusions and proposals to extend the research were presented.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ntogkoulis, Panagiotis
- Ντογκούλης, Παναγιώτης
Subjects
dc:subject × 19- Βιομάζα
- Γεωργικά υπολείμματα
- Ενέργεια από βιομάζα
- Εφοδιαστική αλυσίδα βιομάζας
- Γεωργική Μηχανική
- Διαχείριση γεωργικών υπολειμμάτων
- Υπολογιστές στη Γεωργία
- Biomass
- Crop residues
- Biomass energy
- Biomass supply chains
- Agricultural engineering
- Crop residues management
- Computers in agriculture
- Άλλες Γεωπονικές Επιστήμες
- Γεωπονικές Επιστήμες και Κτηνιατρική
- Γεωπονική μηχανική
- Other Agricultural Sciences
- Agricultural and Veterinary Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50734