Back to search

Democritus University of Thrace (DUTH)

Διερεύνηση της ασύρματης μεταφοράς ισχύος σε εφαρμογές μικροδικτύων συνεχούς ρεύματος

Abstract

dc:description

The main objective of this PhD dissertation is to thoroughly investigate the wireless power transfer systems in DC Microgrids. In particular, the PhD dissertation focuses on the incorporation of wireless power transfer (WPT) in DC microgrids by exploiting distributed energy sources (DES), as well as the investigation of an efficient wireless charging scheme for EV charging applications with universal characteristic, which makes it compatible to various wireless charger topologies. As regards the DES exploitation through WPT system incorporation, the analysis of series-series (SS) compensated WP system for power injection into a DC bus is not fulfilled by the relevant literature. Specifically, the analysis of SS-WPT system in the relevant literature is based on the simplified model of equivalent constant resistance, which cannot accurately describe the interconnection of DES to DC buses through WPT systems. In addition, the analysis and modeling of the diode bridge rectifier, as well as the WPT system behavior when injects power to the DC bus are of major research interest.Regarding the EV wireless charging scheme, relevant literature although rich, as an enormous volume of scientific papers has been published on this subject, yet it is not in line with an efficient solution with universal characteristics. It has been found that the existing methods for efficiency optimization of wireless chargers in the relevant literature are not universal solution as they strongly depend on misalignment conditions between primary and secondary sides, the on-board charger, or the EV type. Additionally, the existing methods do not take into account the operational conditions of the system to achieve high efficiency throughout the entire charging. For example, the resistance values of transmitter and receiver side may vary during operation due to temperature rise. These resistance values significantly affect the maximum efficiency tracking for the wireless charging system. Furthermore, the inability to incorporate flexible communication methods to exchange the necessary information between the two sides is also highlighted in the relevant literature. For this purpose, the existing methods are based on real-time communication with increased complexity and compatibility problems.The abovementioned facts have been the motivation to thoroughly investigate not only the DC microgrids but also the wireless power transfer systems.In this context, an overview of DC microgrids as well as wireless power transfer systems found in the scientific literature is initially presented. Following, the incorporation of WPT systems for DES exploitation in DC microgrids is proposed. This incorporation is profound to be advantageous especially in households and commercial buildings applications, as it adds considerable flexibility in the electrical and architectural design, whilst it simplifies the installation process and maintenance works. In the current PhD dissertation, the analysis of the SS-WPT system has been performed with respect to the nature of load, which is a constant voltage source (CVS) representing the DC bus. Based on the aforementioned consideration, the system analysis differs from the usual analysis with the equivalent resistance approximation. Therefore, a more detailed model of the SS-WPT system that considers the non-unity displacement power factor (DPF) of the diode-rectifier is required in order to study its real operational characteristics. For this reason, the complete harmonic analysis is considered in order to define the DPF value accurately. With the aid of the proposed analysis, a constant power mode of operation (CPG) for the SS-WPT system is revealed. The CPG behavior has been verified for various quality factor as well as coupling coefficient values, being an advantageous property for distributed energy sources exploitation in DC microgrid applications.Next, an enhanced control scheme for wireless EV charging applications is proposed, which achieves high efficiency throughout the entire charging process - regardless the misalignment conditions. The proposed control scheme matches the reflected load impedance, by controlling accordingly the front-end dc-dc converter (FEC) of the SS-WPT system and is independent of the receiver side on-board charger topology (single stage or double-stage), technical characteristics or control scheme that implements the charging profile. In this context, an optimization algorithm (with no need for real-time communication) that considers misalignment is developed for the tracking of the optimal load impedance.An important inclusion of current PhD dissertation is the implementation proposal of communication method with the aid of of Internet of Things (IoT), in order to transmit the necessary information from the receiver side to the transmitter one. The proposed incorporation of IoT technology offers a flexible, low-cost, and universal solution whilst avoiding compatibility problems between wireless antennas. In addition, a comparative study of some desirable features of optimizing strategies for wireless EV battery chargers developed so far has been presented, highlighting the contribution of the current PhD dissertation.Following, the stability analysis of the hierarchical control in a residential DC microgrid has been investigated. In particular, the impact of the constant power loads (CPLs), the line impedances, the communication delays as well as other parameters on the control stability has been studied. The study has highlighted an optimal secondary distributed control scheme, which achieves voltage restoration and proportional load sharing. Its advantage over other distributed control schemes is that any communication delays do not result in control failure and voltage instability in DC bus. In addition, the incorporation of a WPT system to the residential DC microgrid as a wireless charger with bidirectional power flow capability has been investigated. In this context, the impact of the WPT system in microgrid stability acting both as CPL and CPG. The effectiveness of the proposed solution has been evaluated and verified through simulation results. From these results it is concluded that the proposed solution contributes to the overall DC microgrid stability.It should be mentioned that the mathematical analysis presented in this dissertation is validated through simulation, as well as extensive experimental results.

Degree

thesis:*
Grantor dc:publisher
Democritus University of Thrace (DUTH)
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Baros, Dimitrios
  • Μπαρός, Δημήτριος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/50787

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Baros, Dimitrios; Μπαρός, Δημήτριος. Διερεύνηση της ασύρματης μεταφοράς ισχύος σε εφαρμογές μικροδικτύων συνεχούς ρεύματος. Democritus University of Thrace (DUTH), 2021. http://hdl.handle.net/10442/hedi/50787