National Technical University of Athens (NTUA)
Image reconstruction approaches and circuit modeling in electrical impedance tomography
Abstract
dc:descriptionThis PhD thesis presents novel inverse problem formulation and image reconstruction approaches as well as hardware design and simulation methodologies in Electrical Impedance Tomography. Evaluation of the proposed algorithms has been performed via extensive simulations, experimental and in-vivo data. A simulation interface was also developed to observe the performance of different hardware and electrode configurations. In the first chapter, a brief introduction in the definition of Electrical Impedance Tomography as well as a historical review is performed. The second chapter describes the problem's mathematical formulation, the current and measurement patterns, the forward and the inverse problems. The non-linear, ill-posed and ill-conditioned inverse problem is treated as a regularized least-square optimization problem. In this chapter, a description of the state-of-the-art as well as the more recent approaches on the solution of the inverse problem is performed. It includes linear and non-linear regularization approaches, the non-linear inverse scattering Fourier transform-based D-Bar method, as well as machine learning ones.In the third chapter, a novel efficient method-of-moment approach using Green's functions and modified radial basis functions for the representation of the conductivity logarithm is described. The inverse problem is treated with l1-norm or l2-norm regularization methods. The main advantage of this approach is that it uses a more accurate expression of the relationship between the electrode boundary voltages and the conductivity distribution than the typical weak-linearized one. This limits the effects of the problem's non-linearity and leads to faster convergence of the solution, even if conductivity perturbations are intense. The approach is also tested in 3D cylindrical setups, while fine re-meshing (dual reconstruction) can be also applied. Its effectiveness is verified both qualitatively and quantitatively, through numerous simulation examples with the signal noise considered, as well as experimental and in-vivo cases. The fourth chapter presents an approach which combines the method-of-moment described in the third chapter with a sparse Bayesian learning algorithm, based on the EM-algorithm. It offers noise robustness and decreases the effect of hyperparameter values to the reconstruction spatial performance. The method is applied on dynamic lung imaging. For its qualitative and quantitative evaluation, a number of three-dimensional thoracic simulated models were built, based on CT images of 3 adult male subjects and considering five breath-cycle discrete states: from the expiration-end to the inspiration-end. An image registration method for the extraction of the reference (true) images was performed and a number of quantitative metrics was used for the evaluation. Both simulation and in-vivo results showed improved performance at most of the figures of merit compared to state-of-the-art methods. The fifth chapter performs an extensive review of the EIT hardware typical characteristics. Firstly, the basic system's architecture is described. Secondly, common topologies of current sources for bioimpedance measurement, with their advantages and disadvantages are described. The effect of reduced output impedance, mismatch between source and sink and common signal is discussed. Then, a description of the voltage recording circuitry configuration is performed, followed by SNR estimation models. In addition, the demodulation process and possible digital control methods are described.In the sixth chapter an extensive simulation interface for EIT hardware, developed with MATLAB and LT SPICE is presented. Apart from signal noise, the impact of important effects (common signal, parasitic capacitances, electrode contact impedance, sampling rate and resolution, number of samples per measurement, e.t.c.) in the reconstruction quality is researched. For many of them, accurate mathematical models do not exist, hence a direct simulation approach prior to the design process is essential. The signal noise is added to transient simulations, that are transferred in MATLAB to simulate the digital process. The subject under test is also merged in the simulation setup using frequency-dependent multiport equivalent circuits. In the seventh chapter, the content of three research papers about miscellaneous bioimpedance modeling applications is included. In the first part, a highly tunable two-dimensional time-variant thoracic model is presented, focusing on the impact of the boundary and tissues' movement during the measurement process on the reconstructed image. In second part, the skin-electrode contact during tetrapolar bioimpedance measurement is simulated using Cole model analog realization. A post-layout implementation and simulation on IC analog circuit evaluates the model's accuracy. Finally, in the third part, healthy and cancerous lung cells are realized as Cole model-based analog IC circuits using current feedback amplifiers. In the eighth chapter, the conclusions of the research conducted are drawn. Finally, the appendices and include basic parts of the MATLAB code used as well as mathematical proofs for the second Green theorem integral equation formulation and the Neumann Green's function on a circular domain.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dimas, Christos
- Δήμας, Χρήστος
Subjects
dc:subject × 33- Ηλεκτρική τομογραφία σύνθετης εμπέδησης
- Απεικόνιση
- Ορθό πρόβλημα
- Αντίστροφο πρόβλημα
- Κανονικοποίηση
- Μέθοδος των στιγμών
- Αραιή Μπαεζιανή μάθηση
- Υλικό
- Πηγή ρεύματος
- Αναλογική διάταξη
- Θόρυβος
- Εκτίμηση
- Electrical impedance tomography
- Image reconstruction
- Forward problem
- Inverse problem
- Regularizaton
- Method of moment
- Sparse Bayesian learning
- Hardware
- Current source
- Analog front end
- Noise
- Evaluation
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Βιοϊατρική Μηχανική
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
- Medical Engineering
- Biomedical Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50903