Institutes outside Greece
The stiffness of lime and lime-cement stabilised capping layers
Abstract
dc:descriptionDuring the last decade, the need has been emphasized both by the industry and also several academic institutions to move away from the current empirical pavement foundation design approach and towards an analytical procedure that requires measurement of the load carrying capabilities of the employed materials both in the laboratory, prior to construction, and upon completion of the foundation construction, to ensure compliance. Due to the wide range of materials available for road foundation construction emphasis has been given so far only on fine-grained and granular soils while the area of recycled or chemically stabilised materials is still grey. Especially in the case of chemical stabilisation, additional effort is required to accurately investigate the load-deformation potentials since the performance is improved with time (curing) and this in turn depends on the boundary conditions of curing, i.e. temperature and water availability. At the moment a procedure to adequately simulate likely worst case scenario field curing conditions does not exist. This research investigates the effects of repeated loading on lime and lime-cement stabilised clay that has been realistically cured according to a newly introduced curing model that has specifically been developed for the needs of this Thesis. The results demonstrated that the small degree of confinement that exists insitu, as far as surface stabilisation is concerned, cannot be ignored when curing in the laboratory due to the fact that it significantly contributes to the structural integrity of the stabilised layer during water absorption/attack. The behaviour of stabilised clay under increasing levels of repeated loading proved in many ways similar to that of untreated clay, however significant differences also occurred. Hence, while the stiffness in most of the cases remained constant after the application of a repeated stress equal to 0.5% qmax (undrained shear strength) permanent deformation became unstable at much lower level than the 1% permanent strain limit that is valid for untreated clays. Overall, the addition of small amounts of stabilisers improved not only the strength of the material but also the elastic and plastic properties while at the same time reduced the susceptibility of the material to permanent deformation upon ‘wetting’.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2005
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papadimitriou, Georgios
- Παπαδημητρίου, Γεώργιος
Subjects
dc:subject × 17- Θεμελιώσεις οδοστρωμάτων
- Μέτρο επανάταξης
- Δυσκαμψία
- Έδαφος έδρασης
- Βελτίωση με άσβεστο
- Βελτίωση με άσβεστο-τσιμέντο
- Road foundations
- Resilient modulus
- Stiffness
- capping layers
- Lime treatment
- Lime-cement treatment
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολιτική μηχανική
- Civil Engineering
- Engineering and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/50970