Back to search

University of Western Macedonia

Theoretical and experimental investigation of the flow field and visualisation of the flame in internal combustion engines using renewable fuels

Abstract

dc:description

The internal combustion engine will remain the major propulsion system for land transportation, for at least the next decade, as the transition to full electrification will not be imminent. The automotive industry always looks for cleaner and more efficient technologies and biofuels are a promising alternative to fossil fuels that reduce the net production of greenhouse gases (GHG) and they can be used in existing vehicle engines. The change of fuel requires a detailed re-assessment of the flow and combustion phenomena in order to improve the combustion efficiency and emissions. In order to achieve this, it is important to understand and control the in – cylinder flow evolution, and primarily the Tumble development as it is strongly linked with the mixing preparation, combustion process and emissions production. Flow field measurements were obtained by using low repetition rate PIV and time resolved PIV techniques in a 475cc optical single – cylinder Gasoline Direct Injection (GDI) spark ignition engine. Moreover, flame visualization and emission measurements were performed for gasoline and two biofuel blends. The results include flow fields visualisation using these two PIV techniques. Alongside, Large Eddy Simulation and Reynolds Averaged Navier Stokes (RANS) simulations which were carried out in collaborating research laboratories using real engine geometry and initial conditions similar to the experiment, were used to compare the flow field and validate quantities such as Turbulent Kinetic Energy (TKE) and Tumble Ratio (TR). Moreover, quantitative comparison was conducted by using the relevance (RI) and the magnitude (MI) indices; and, the Γ1 criterion was used to identify the center of vortex structures. Subsequently, flame visualization measurements were conducted at different intake pressures (850mBar & 700mBar), engine speeds (1000, 1500, 2000 RPMs), injection strategies (single, double) and two air / fuel ratios (λ=1 & λ=1,2). This work showed that a tumble-like motion with Counterclockwise rotation (CCW) was present when the intake valves were open and continued to evolve at the intake and compression stroke. Comparing the experimental and simulation results, the same trend was observed for the TKE and TR at the intake stroke. The RI and MI gave acceptable quantitative comparison of the flow field for values above 60% and 80% respectively, and the Γ1 algorithm estimated the vortex center in both approaches, giving a good agreement in some CADs. Regarding the combustion process the stoichiometric combustion presented higher flame speed and higher rate of flame diameter growth. The ETBE20 presented the fastest flame development compared with other fuels under the same conditions. The emissions showed a decreasing trend by using biofuels blends.

Degree

thesis:*
Grantor dc:publisher
University of Western Macedonia
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tsiogkas, Vasileios
  • Τσιόγκας, Βασίλειος

Subjects

dc:subject × 22

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/51179

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tsiogkas, Vasileios; Τσιόγκας, Βασίλειος. Theoretical and experimental investigation of the flow field and visualisation of the flame in internal combustion engines using renewable fuels. University of Western Macedonia, 2022. http://hdl.handle.net/10442/hedi/51179