Aristotle University Of Thessaloniki (AUTH)
Research and development of Micromegas detectors for New Physics searches
Abstract
dc:descriptionThe operation of the Large Hadron Collider (LHC) and its experiments have confirmed the existence of particles with their measurements. One of the last outstanding results was the discovery of the Higgs boson in 2013. The accelerated particles should interact with even higher energies to discover indices of New Physics beyond the Standard Model. Due to this demand, the accelerator will be upgraded to the High-Luminocity LHC. In this new status, the particles will interact with energy up to 14 Tev at the centre of mass, and the beam's luminosity will reach up to L = 7x10^34 cm^-2s^-1. The present detecting technologies will not cope in such demanding circumstances. An upgrade of the existing detectors is mandatory for the smooth operation of the experiments. Moreover, further research and development in the detectors domain are necessary for future experiment upgrades.The ATLAS experiment, a general-purpose high luminosity experiment at the LHC, concluded to upgrade its muon spectrometer. This decision was made, as the old detecting system will not be sufficient to manage the high demands of the HL-LHC era, especially for regions nearby the interaction point. These areas of the spectrometer were occupied by the New Small Wheels, which was constituted of MDT, CSC, and TGC detectors. Studies have shown that all these detecting technologies are inadequate to reduce the false triggers for luminosity much higher than now (the existing system suffers from 90% background signals). Moreover, the reconstruction of charged traversing particles tracks will be inaccurate from these detectors. The New Small Wheels (NSW) proposed to replace the existing detecting system. The suggested design comprises small-strip Thin Gap Chambers (sTGC) and resistive-strip Micromegas (MM). The sTGC technology will provide triggering information mainly, while the MM will contribute to the tracking reconstruction. A combination of these technologies will reduce the false trigger information. Additionally, it will contribute to the online reconstruction of segments of the muon tracks nearby the interaction point with σθ = 1 mrad, and will contribute to the offline track reconstruction with σr = 100 μm for particle rates up to 15 kHz/cm^2. Chapter 1 describes the ATLAS experiment, the implemented detectors at the muon spectrometer, and the suggested technologies of the NSW. A brief introduction of the operation principles of gaseous detectors, as well as a description of the Multi-wire proportional chamber variants, is given in chapter 2. The NSW will occupy a total area larger than 1200 m^2. Custom materials, e.g., PCBs, and innovative techniques developed to construct large area detectors of such a size. Due to the uncommon detectors' dimensions and the unusual production methods, their construction took place in specialised laboratories. The Aristotle University of Thessaloniki undertook the construction of a part of the MM detectors. Various quality control measurements were performed during the construction of these parts of the detectors, as they should fulfill the strict specifications of the ATLAS experiment. I participated in most of the construction steps and the quality measurements during the production period. After all, contribution to the detectors' construction was the assigned qualification task to me. Chapter 3 reports all these construction procedures and the quality control protocols. After the construction completion, all MM detectors were sent to the CERN facilities. All chambers had to be mechanically integrated and equipped with their electronics. Cosmic ray studies validated their optimal operation and helped the detection of any malfunction before their integration with the sTGC parts. These studies tested several operational characteristics of the detectors like their gain, the strips' multiplicity, and the size of the clusters. Also, studies concerning any correlation between the gas flow (rate and direction) and the detector's operation were performed. Moreover, it was measured the detector's efficiency and the spatial resolution with different gas fillings mixtures (ArCO_2 and ArCO_2C_4H_10). Results from all these studies are presented in Chapter 4. The high intensity of the HL-LHC luminosity will increase to more than 140 the proton-proton vertices in the same bunch-crossing. The tracking information will be insufficient to associate the interactions to the corresponding vertex. The data from the time dimension is necessary to separate these vertices. The time information should be with a resolution of at least 30 ps precision. The typical gaseous detectors, like the MM, cannot estimate the passing time of a charged particle with a precision better than a few ns. It was proposed customisation of a typical MM, which will benefit from the Cherenkov effect. That modified detector is called PICOSEC-Micromegas, has modified geometrical characteristics, and is equipped with a Cherenkov crystal emitter and a photocathode. This customised variant of the MM can reach a timing resolution of tens of picoseconds. It is an improvement of three orders of magnitude compared to a typical MM. Chapter 5 presents the implemented timing methods for this detector and the techniques to estimate the number of emitted photoelectrons. Moreover, it contains the results of the first PICOSEC-Micromegas prototype. To implement the PICOSEC-Micromegas detector on a large-scale experiment its surface should be increased. It was proposed a design of a multi-pad detector surface, with different readout channels on each pad for a large surface variant. This design introduced new challenges regarding detector construction. Moreover, the data processing for the regions nearby neighbouring pads requires special treatment. The first multi-pad prototype had a non-uniform performance across its surface due to construction structure impact to the flatness of the PCB. Chapter 6 includes the studies of this multi-pad variant with muon beam data at the SPS facilities of CERN and the estimation of flatness correction parameters for this detector. Usage of these corrections permits the performance estimation of a well-flatted detector. The same chapter contains studies that were made on a redesigned multi-pad. It was estimated the uniformity of timing performance from consecutive pads. Also, it was estimated the timing resolution for sharing signals between neighbouring pads. Last but not least, it was estimated a global parametrisation which describes all the pads independently of their position. That is very important for the development of a large-scale detector.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Maniatis, Ioannis
- Μανιάτης, Ιωάννης
Subjects
dc:subject × 11Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/51290