Back to search

National Technical University of Athens (NTUA)

Εγκλεισμός του προβιοτικού στελέχους Bifidobacterium animalis subsp. lactis BB-12 και εφαρμογή του σε τρόφιμο

Abstract

dc:description

The encapsulation of probiotic bacteria is defined as the process of entrapping probiotic cells in food-grade materials in order to produce particles with a thin, semipermeable film having a diameter of a few nanometers to a few millimeters. The produced beads can be incorporated into food matrices for the production of probiotic products. The aim of the encapsulation technology is the limitation of probiotic cell deterioration or loss when exposed to adverse conditions during storage and/or consumption. In addition, the encapsulation of probiotic bacteria provides the food industry with flexibility in developing products containing certain bacterial species. In the current thesis, the encapsulation of probiotic bacteria is examined in order to subsequently integrate the encapsulated probiotic cells into a food matrix. The probiotic strain Bifidobacterium animalis subsp. lactis BB-12 was selected for the encapsulation, whereas the extrusion and the emulsification techniques were applied as the encapsulation methods. The extrusion method is based on the addition of the encapsulation blend, containing the probiotic cells, to a CaCl2 solution, leading to the formation of beads through crosslinking. Accordingly, the emulsification method is based on the dispersion of an aqueous phase containing the encapsulating blend and the probiotic bacteria within an oil phase and the forthcoming emulsion formation. When the emulsion comes in contact with a CaCl2 solution, crosslinking occurs as in the case of extrusion, resulting in the conversion of the droplets into solid particles. The encapsulation blends applied through these two encapsulation methods, included: sodium alginate on its own, as well as in combination with other materials either conventional such as xanthan, glycerol, κ-carrageenan and whey powder along with pectin, or innovative materials, such as nanocrystalline cellulose (CNC). Moreover, the use of milk instead of water for the preparation of the sodium alginate solution was studied. Inulin, glucose or L-cysteine-HCl were also added into the encapsulation blends in order to examine their effect on the viability of the probiotic bacteria. Moreover, an innovative encapsulation method was applied which combines a double w1/o/w2 emulsion with the extrusion technique, aiming to the increase of the provided protection. The application of this innovative method included the use of various encapsulating agents (alginate only, alginate-pectin, alginate-gelatin, alginate-casein, alginate-arabic gum) as the external phase for the formation of the double emulsion. Based on the ζ-potential and viscosity values, the most stable emulsion was selected for extrusion. In each case, the probiotic strain BB-12 was incorporated into the internal phase of the double emulsion along with inulin. Furthermore, the option of coating the produced beads with chitosan was studied. The aim of the above was to evaluate the ability of these materials to encapsulate probiotic bacteria and protect them efficiently during refrigerated or frozen storage, as well as during their exposure to simulated gastrointestinal conditions. The efficacy of each method regarding the encapsulation of the probiotic strain Bifidobacterium animalis subsp. lactis BB-12 was examined through the encapsulation yield (EY%), whereas the provided protection was assessed by determining the survival rates (SR%) of the probiotic cells. All of the above were determined through microbiological analysis. Scanning Electron Microscopy (SEM) was also used in order to study the structure and morphology of the encapsulation products. The first two encapsulation methods (extrusion, emulsification) resulted in high encapsulation yield values, with the best results, generally, being achieved through the emulsification technique (84.2-99.7%) versus the extrusion technique (58.6-100%). Regarding the examined encapsulation agents, the milk-alginate-glucose blend provided the best results, with encapsulation yields of 100.0% and 99.2% through the extrusion and emulsification technique, respectively. High encapsulation efficiency values were also achieved through the combination of alginate with other materials, such as carrageenan and CNC, reaching up to 91.3% through the extrusion method and up to 98.8% through the emulsification method. These encapsulation blends form a sufficiently stable and dense grid which successfully encloses a great percentage of probiotic cells. Thus, they are proposed as effective carriers of probiotic bacteria. In contrast, the use of sodium alginate alone as an encapsulating agent resulted in lower encapsulation yields (60.5% through extrusion and 86.9% through emulsification), whereas the addition of xanthan, glycerol or a mixture of whey powder and pectin significantly increased these values, either in the case of extrusion (73.2, 78.0, 86.9% respectively), or in the case of emulsification (87.1, 92.6 and 87.4%). Furthermore, the addition of glucose was proved to be favorable for the viability of probiotic cells during encapsulation, slightly increasing the encapsulation yield.The encapsulation blends (blends of alginate with glucose and κ-carrageenan, CNC or milk) which resulted in high encapsulation yield values provided, also, adequate protection to the encapsulated probiotic cells both during refrigerated or frozen storage and exposure to simulated gastrointestinal conditions. The highest survival rates during storage at 4oC were achieved through the extrusion technique, exceeding 72%, in contrast with the survival rates achieved using the same encapsulation blends through emulsification (> 51.1%). The use of alginate alone as an encapsulation agent did not provide satisfactory results and, thus, its combination with other materials was examined. As in the case of the encapsulation yield, the optimal results were achieved through the combination of milk with alginate, providing survival rates up to 72.0% in the case of encapsulation through extrusion and 52.7% in the case of encapsulation through emulsification, after 30 days of storage at 4oC. In the case of the extrusion method, the combination of alginate with xanthan, glycerol, whey-pectin powder mixture, carrageenan or CNC maintained the probiotic cells’ survival rates up to 28.6-37.8% until the end of 30-days storage. Also, it is worth noting that the addition of glucose in all the encapsulating blends, except from the milk-alginate blend, led to significant viability increase (12.9-42.2%) during refrigerated storage. The addition of inulin to each encapsulation blend increased, in most cases, the viability of the probiotic cells. A similar trend regarding the behavior of the encapsulating blends was observed during storage at -18οC; the utilization of the previously referred encapsulating blends (blends of alginate with glucose and κ-carrageenan, CNC or milk) led to survival rates of 69.9-82.4% when encapsulation was applied through extrusion and 49.6-55.2% when it was applied through emulsification. Regarding the bacterial load of the beads produced through extrusion, it was maintained at levels above 6 log cfu g-1 for up to 30 days of storage at 4oC or -18oC in the case of blends of carrageenan, CNC or milk with alginate and glucose. In addition, in the case of storage at low temperatures, the addition of glycerol in the encapsulation blend significantly contributed to the viability maintenance; after 30 days of storage at -18οC, survival rates of 82.5% and 57.1% were achieved in the case of extrusion and emulsification technique, respectively.The results obtained from the exposure of encapsulated probiotic bacteria to simulated gastrointestinal conditions were also encouraging; the best survival rates were achieved in the case of beads produced through the extrusion of the milk-alginate blend (78.4%). The respective beads produced through emulsification maintained the viability of the probiotic strain BB-12 up to 45.7%. In addition, as alginate alone did not provide adequate protection to the encapsulated probiotic cells, its combinations with carrageenan, xanthan, whey powder-pectin or CNC were tested. This resulted in increased survival rates of 7.9-44.6% in the case of extrusion and of 28.1% in the case of emulsification. The addition of the prebiotic inulin to the encapsulating blend had a significant effect on the viability of probiotic cells when exposed to simulated gastrointestinal conditions, as it increased their survival at all cases. On the other hand, the addition of glucose or L-cysteine-HCl to the encapsulation blend did not contribute significantly to the viability of the encapsulated probiotic bacteria.According to the beads’ examination by scanning electron microscopy (SEM), the addition of glucose, carrageenan, CNC or milk to the encapsulation blend improved the structure of the extrusion products, as no cracks or discrete pores were observed, thus confirming the protective effect on the probiotic bacteria. The beads produced through emulsification were characterized by smaller size, more uneven morphology and tendency to form agglomerates.Regarding the encapsulation of BB-12 through the innovative method that combines the double w1/o/w2 emulsion with the extrusion technique, the aquatic solution of alginate on its own, was the most stable, based on the ζ-potential and the viscosity values of the solutions used as the external phase of the double emulsions. The alginate solution had the highest absolute ζ-potential value (-65.1 mV), whereas the aquatic solution of gum arabic and alginate had the lowest absolute ζ-potential value (-18.8 mV). The double emulsion formed with alginate only as the external phase had the highest absolute ζ-potential value (3.4 mV) and the lowest viscosity value (34.3 cP) in comparison to the other double emulsions that exhibited absolute ζ-potential values between 0.1-1.6 mV and viscosity values between 56.7 and 283.4 cP. The application of this double emulsion with or without inulin for the encapsulation of BB-12, as well as with or without chitosan coating, led to encapsulation yields ranging between 72.5% and 81.6%. The incorporation of the probiotic strain Bifidobacterium animalis subsp. lactis BB-12 into the internal phase of the double w1/o/w2 resulted, in all cases, in maintaining the viability above 6 log cfu g-1 during storage at 4oC or -18oC. Coating the beads with chitosan resulted in optimal survival rates (82-86.1%) after the exposure of the beads to simulated gastrointestinal conditions. Based on the overall results, the best encapsulation products obtained through the most sustainable methods were incorporated in milk along with conventional starter culture for the production of probiotic yogurt. Thus, in the last part of the thesis, the beads produced through extrusion and emulsification - which are considered industrially applicable methods – encapsulated with blends of alginate with glucose and carrageenan, CNC, milk or a mixture of whey powder and pectin were used. The fermentation process was accelerated by the addition of both encapsulated or free probiotic bacteria. The encapsulation of probiotic bacteria reduced their contribution to fermentation; the fermentation of products with beads produced through emulsification exhibited the shortest latent phases (176-186 min) and fermentation times (205-210 min) and the higher absolute values of maximum pH reduction rate (0.032-0.036 min-1), regardless of the encapsulating agent used. The addition of encapsulated probiotic bacteria increased both the viscosity values of yogurt (up to 45483 cP versus 18594 cP of yogurt with only conventional culture after 24 h of storage at 4oC) and the values of firmness (up to 0.82 N versus 0.62 N in the case of yogurt with only conventional culture), adhesiveness (up to 0.65 N·s versus 0.31 N·s in the case of yogurt with only conventional culture) and elasticity (3.01 to 2.15 in the case of yogurt with only conventional culture). In agreement with the results reported earlier, the encapsulation of probiotic bacteria, especially through the extrusion technique, increased their survival rates both during storage and exposure to simulated gastrointestinal conditions. The maximum survival rates were achieved when the probiotic cells were encapsulated into an alginate-milk blend through the extrusion method, reaching up to 81.6%, after 30 days of refrigerated storage (compared with 35% in the case of conventional yogurt) and 85.3% upon exposure to simulated gastrointestinal conditions.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Frakolaki, Georgia
  • Φρακολάκη, Γεωργία

Subjects

dc:subject × 13

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/51445

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Frakolaki, Georgia; Φρακολάκη, Γεωργία. Εγκλεισμός του προβιοτικού στελέχους Bifidobacterium animalis subsp. lactis BB-12 και εφαρμογή του σε τρόφιμο. National Technical University of Athens (NTUA), 2022. http://hdl.handle.net/10442/hedi/51445