Aristotle University Of Thessaloniki (AUTH)
Τροποποίηση του θεωρητικού πλαισίου του πειράματος της νανοεντύπωσης με χρήση θεωρίας βαθμίδων
Abstract
dc:descriptionThis PhD dissertation addresses the modification of the conceptual framework of the nanoindentation (NI) experiment and aims to replace the current way of dealing with it. The importance of this research lies in the necessity of understanding the 3D NI experiment and creating a unified theoretical and experimental framework. The first introductory chapter presents the research objectives of this thesis, the hypotheses and the research questions it aims to answer, as well as the publications related to this thesis. In the second chapter some basic concepts about the NI method, the theoretical background, the techniques used and the main factors that influence the measurements are mentioned. This is followed by a literature review covering the evolution of the different approaches to NI, gradient theories, size effects as well as the stress and strain fields that develop under the indenter tip during NI experiments. Finally, the main problems arising from the use of the most common NI method, the Oliver and Pharr method, are discussed. In the third chapter, a first approximation of the Indentation Size Effect (ISE) is made through a "pseudo-gradient" plasticity model (first introduced by Aifantis and co-workers), which is applied for the case of pyramidal as well as spherical tips, and extended for the case where the gradient coefficient is not a constant but can also depend on the strain. In chapter four, considering the ISE as an artifact derived from the geometry of prismatic tips, a new 2D gradient plasticity model capable of predicting the ISE behavior in metals and steels is developed. This model is applied for different tip geometries (Berkovich, Vickers, spherical, conical), taking also in account the bluntness of the tip, as well as linking the macroscopic hardness with the yield stress. The methodology developed in chapter five is based on the use of gradient elasticity theory, which modifies classical elasticity theory by introducing higher order gradients, proposed by Aifantis and co-workers and used extensively in the international literature. In this chapter gradient elasticity is used to remedy some of the deficiencies of NI modelling. The main problems presented by the current conceptual framework for NI include: the one-dimensional consideration of a three-dimensional problem, the calculation of elastic constants after imposing strong local plasticity on the specimen, and the dependence of the calculated elastic properties (elastic modulus and hardness) on the maximum penetration depth or the maximum applied load. The above problems are solved by the proposed analysis, in which the NI experiment is considered as a "non-uniform" compression experiment due to the “complex” geometry of the prismatic tip (Berkovich, Vickers). The gradient elasticity approach was used to model this 'non-uniform' stress under compression. It was shown that the stress and strain fields developed by applying the new theoretical framework can simulate shear band zones formation and thin film delamination phenomena that occur during NI experiments. Finally, the overall conclusions are presented and ideas for further research are proposed.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kampouris, Asterios
- Καμπούρης, Αστέριος
Subjects
dc:subject × 14- Νανοεντύπωση
- Βαθμιδική ελαστικότητα
- Βαθμιδική πλαστικότητα
- Φαινόμενο μεγέθους εντύπωσης
- Nanoindentation
- Gradient elasticity
- Gradient plasticity
- Indentation size effect
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Materials Engineering
- Engineering and Technology
- Materials Science, Characterization and testing
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/51489