National Technical University of Athens (NTUA)
Iron oxide removal from bauxite residue through microwave roasting and magnetic separation
Abstract
dc:descriptionBauxite residue (BR), also known as red mud, is the reddish solid waste generated during the production of alumina from bauxite ores. In particular, the production of 1 metric ton of alumina creates between 0.9 and 1.5 metric tons of residue depending on the composition of initial bauxite ore.Due to its high alkalinity, with a pH range between 10 and 13, the handling of this waste is a challenge for the alumina industry. In addition, the massive volume of BR produced, which exceeds 150 million metric tons per year worldwide, is causing drastic scarcity of available storage areas. However, its chemical composition encompassing iron, alumina and titania oxides turn BR into an interesting resource for base and critical metal recovery, while a large-scale and bulk utilisation is rather conceivable using BR in construction materials, such as aggregates, cements, ceramics or inorganic polymers. In the last decades, the research was concentrated to find environmentally friendly and cost-effective methods to dispose of or utilize the bauxite residue.In this framework, the aim of this PhD was to recover iron from BR, developing two different reductive roasting processes followed by magnetic separation. The first part of the PhD was focused on the study of optimal process for reduction of the nonmagnetic iron phases found in BR (namely hematite and goethite), to magnetic ones such as magnetite, wüstite, and metallic iron. BR was mixed with a carbon source (metallurgical coke) as a reducing agent and roasted in a resistance-heated tube furnace. The magnetic iron phases in the roasting residue were fractionated in a second stage through wet magnetic separation, forming a valuable iron concentrate and leaving a nonmagnetic residue containing rare earth elements among other constituents. The BR-roasting process has been modeled using a thermochemical software (FactSage 6.4) to define process temperature, Carbon/Bauxite Residue mass ratio (C/BR), retention time, and process atmosphere. Roasting process experiments with different ratios of C/BR (0.112 and 0.225) and temperatures (800 and 1100 °C), 4 h retention time, and, in the presence of N2 atmosphere, have proven almost the total conversion of hematite to iron magnetic phases (99 wt %). Subsequently, the magnetic separation process has been examined by means of a wet high-intensity magnetic separator, and the analyses have shown a marginal Fe enrichment in magnetic fraction in relation to the sinter.In the second part of the work a microwave-assisted heating was presented as a suitable method to transform hematite and goethite contained in bauxite residue into magnetite, wüstite and metallic iron, with a short processing time. The final target was the production of a sinter with strong magnetic properties, allowing the magnetic separation of Fe from the residue. The influence of microwave energy on the sample, the effect of irradiation time together with the carbon/bauxite residue mass ratio (C/BR) were the parameters that have been analyzed to optimize the process. Their optimized combination allowed to transform the 79 % of the iron present in the sinter into metallic iron. However, hercynite (FeAl2O4) was also formed and the presence of this mineralogical phase could be considered a possible drawback for its magnetic properties, since its presence in the magnetic fraction could reduce its purity. To avoid the formation of FeAl2O4, a combined soda sintering, and microwave reductive roasting process of bauxite residue was presented. In the first step, all the alumina phases in BR were transformed into sodium aluminates and leached out through alkali-leaching to recover alumina by adding sodium carbonate as flux to BR. Subsequently, the leaching residue have been mixed with carbon and roasted by using a microwave furnace at the optimum conditions. The iron oxide present in the sinter were converted into metallic iron (98 %). In addition, hercynite is not detected. The produced sinter is subjected to magnetic separation processes by using a wet high intensity magnetic separation to separate iron from the other elements.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Cardenia, Chiara
- Καρντένια, Κιάρα
Subjects
dc:subject × 8Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/51604