Back to search

University of Western Macedonia

Design and evaluation of advanced CeO2-based transition metal catalytic composites for CO2 activation by renewable H2 toward synthetic CH4 and CO

Abstract

dc:description

The development of remarkably active and cost-efficient catalytic materials via a rational design procedure and their subsequent employment in various energy/environmental applications is one of the most significant research focuses in the field of heterogeneous catalysis. To this end, the present thesis aims at the fine-tuning of transition metal catalysts (i.e., Cu, Co, Ni, Fe) supported on ceria, CeO2, via advanced synthesis and promotion routes. Throughout this thesis it was revealed that the adjustment of shape and size and additionally the appropriate promotion of ceria-based metal oxides can exert significant effects on the catalytic performance of the prepared samples, by inducing modifications in various key properties of the metal-ceria system and in turn on the metal-support interactions, effectively attaining remarkably active and stable catalysts for the environmentally important reaction of CO2 hydrogenation. Also, promising results were acquired through pilot-scale catalytic experiments for the most promising material derived from this thesis (i.e., Ni/CeO2-nanorods) and it was next disclosed that a real-scale process employing this material for the production of synthetic natural gas via CO2 hydrogenation may potentially prove to be advantageous from both a techno-economic and environmental feasibility standpoint.In the framework of the thesis, the combined effect of the distinct nanomorphology of ceria (NX = nanorods, nanopolyhedra, nanocubes) via hydrothermally synthesized samples and the nature of the active metal phase were firstly explored. It was seen that the dependence of the catalytic activity on the morphology of CeO2 nanoparticles was more or less negligible, whereas the catalytic activity in terms of CO2 conversion and CO/CH4 selectivity values was practically determined by the impregnated metal on CeO2 nanoparticles, with Ni-based and Co-based samples being mostly selective towards methane formation and Cu- and Fe-based catalyst producing predominantly CO. As for CO2 conversion, the values followed the order; Ni/CeO2-NX > Co/CeO2-NX > Cu/CeO2-NX > Fe/CeO2-NX ~ CeO2-NX. In all, Ni/CeO2-NR and Cu/CeO2-NR were the most active materials for the Sabatier and rWGS reaction, attaining equilibrium product yields at as low as 300 and 430 oC, respectively, attributed to the higher redox properties and the highest abundance of fully reduced metallic entities at the low-temperature regime.Next, the effect of Cs addition in variable Cs loadings (0-4 Cs atoms/nm2) of co-precipitated Cu/CeO2 samples was investigated, with the scope of evaluating the effect of alkali promotion on the catalytic activity and specifically the product distribution. Notably, it was revealed that whereas Cs induced a reduction in the conversion of CO2, at the same time it increased the selectivity towards CO up to a loading of 2 Cs atoms/nm2, stabilized at higher Cs content values. These interesting results were tentatively attributed to Cs-induced changes in various catalytic properties, i.e., the drastic decrease of BET surface area, increased basicity, stabilization of partially reduced copper species and the increased CO desorption capacity.As for the further optimization of nickel-ceria catalysts, the effect of nickel loading (and in turn Ni particle size) was subsequently explored over a series of Ni/CeO2-NR catalysts with variable Ni/Ce atomic ratios, between 0.10 and 1.50. Increasing Ni loadings proved to be largely beneficial for the catalytic activity, with the optimum performance attained for the sample with Ni/Ce = 1. Notably, all samples showed remarkably high catalytic CO2 methanation activity comparable or even superior to the state-of-the-art nickel-ceria composites reported in the literature. Even more importantly, by means of a detailed structure-sensitivity analysis, the balance between adequately lengthy nickel-ceria periphery and increased density of highly under-coordinated Ni corner sites offered from NiCe-1.00 sample was deemed to be essential for the maximum intrinsic reactivity.The effect of structural promotion was assessed over various mixed ZnO-CeO2-NR oxides with variable Zn/Ce atomic ratios of 0.2, 0.4 and 0.6 as well pure ZnO, which were also used as supports for the impregnation of 8% wt. Ni (atomic ratio Ni/Ce = 0.20). The results showed that all the as-synthesized mixed oxides and Ni/ZnO-CeO2-NR samples attained practically the same catalytic activity. Most importantly, however, and in complete contrast to the performance of Ni/CeO2-NR, all ZnO-containing samples demonstrated high CO yield values between 300-450 oC, indicating the ZnO-induced shift in the reaction pathway. This behavior was ascribed to the modifications induced by ZnO in various properties and specifically the decrease in the BET surface area, reducibility, surface basicity and CO adsorption capacity. Advancing from the aforementioned results in the lab-scale and towards the scaling-up of the thesis results, the pilot-scale performance of a structured pellet catalyst based on Ni/CeO2-NR using the complex oxide NZP as a substrate (in a mass composition of 10% Ni/CeO2-NR and 90% NZP) under variable reaction conditions was subsequently explored. The volume and mass scaling factors compared to lab-scale experiments were 64:1 and 77:1, respectively. It must be stated at this point that the synthesis of the structured catalyst was made by MIRTEC S.A. and the manufacturing of the pilot-scale unit was realized by HELBIO S.A., in the framework of the project NANOCO2. The results showcased the high performance of the as-prepared structured catalyst, while a stable performance (70% CH4 yield) for an 80-h period at GHSV = 8,200 h-1, 300 oC and 1 bar was demonstrated.Lastly, the techno-economical and sustainability assessment of a real-scale process based on Ni/CeO2-NR for the production of synthetic natural gas combining RES-powered water electrolysis for H2 generation and the amine-based capture of CO2 from the flue gases of a cement plant was evaluated. It was found through a sensitivity analysis that under realistic projections for key metrics such as RES subsidizing, the proposed process has the potential to be both financially and environmentally attractive.Collectively, through the present thesis, the key role of the hydrothermal synthesis method as well as the nature of the metal phase in the determination of the conversion of CO2 and product distribution was disclosed, showcasing the synergy between both functional units of the catalyst and the remarkably high activity and versatility of the investigated metal-ceria catalysts towards various applications. Also, it was demonstrated that promotion with appropriate metals such as Cs and Zn can significantly alter the catalyst properties (i.e., BET surface area, surface acidity/basicity, reducibility, and CO adsorption affinity), leading to modifications in the reaction pathway and in turn to variabilities in the values of CO/CH4 selectivity. Also, the content of the impregnated metal can exert important alterations in the interactions in the vicinity of the metal-ceria periphery, as well as in the metal particle size/dispersion and coordination number. Indeed, the former may induce variabilities in the extent of solid solution formation and oxygen vacancy concentration, whilst the latter can in effect provide a local electronic environment in the vicinity of metal particles that is associated with optimized metal-support interactions and maximal abundance of intrinsically active sites. Lastly, promising results under variable reaction conditions and long-term stability tests were attained from pilot-scale experiments, showcasing the potential for further scaling-up of a CO2 hydrogenation process involving the optimum as-studied materials in the thesis as a basis for a structured catalyst. This was also corroborated by a detailed techno-economic and environmental assessment of a large-scale proposed CO2 hydrogenation integrated scheme involving Ni/CeO2-NR, which served as a preliminary validation of its financial and environmental sustainability under realistic projections.

Degree

thesis:*
Grantor dc:publisher
University of Western Macedonia
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Varvoutis, Georgios
  • Βαρβούτης, Γεώργιος

Subjects

dc:subject × 13

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/51651

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Varvoutis, Georgios; Βαρβούτης, Γεώργιος. Design and evaluation of advanced CeO2-based transition metal catalytic composites for CO2 activation by renewable H2 toward synthetic CH4 and CO. University of Western Macedonia, 2022. http://hdl.handle.net/10442/hedi/51651