National Technical University of Athens (NTUA)
Θερμομηχανικές ιδιότητες πολυμερικών νανοσύνθετων υλικών με βάση το γραφένιο
Abstract
dc:descriptionIn this PhD thesis, six series of polymeric nanocomposites with different polymeric matrices were designed and studied. The first and second series consist of two types of polymeric matrix LLDPE (zLLDPE with Ziegler Natta and mLLDPE with metallocene catalysts), with multi-walled carbon nanotubes (MWCNTs) as nanofillers. Carbon nanotubes were added to the polymeric matrix in zLLDPE at contents of 2, 4, 6, 8, 10, 15, 20% and in mLLDPE at contents of 2, 4, 6, 8, 10% per weight respectively. The third series of polymeric nanocomposites consists of a mLLDPE and polylactid acid (PLA) matrix and graphene oxide (GO) nanoclays at content 1% per weight. The fourth series consists of mLLDPE polymeric matrix with carbon nanotubes (MWCNTs), carbon nanofibers (CNFs) and graphene oxide (GO) at 1.31% per weight respectively. Finally, the fifth and sixth series are hybrid materials that consist of mLLDPE and PLA as polymer matrices, with a mixture of graphene oxide-carbon nanotubes and graphene oxide-carbon nanofibers with a ratio of 1:1 in contents of 1.31, 3.84, 6.25 and 3.84, 6.25, 8% by weight respectively.Initially, the morphology, microstructure and dispersion of the nanocomposites were observed using Scanning Electron Microscopy (SEM). Raman spectroscopy experiments were then performed to investigate the quality of the materials, as well as to determine the interactions between matrix-nanofillers and nanofiller-nanofiller. Dielectric Relaxation Spectroscopy and Broadband Dielectric Spectroscopy (DRS/BDS) experiments were then performed to measure the electrical conductivity and estimate the percolation threshold. Then, through the Differential Scanning Calorimetry (DSC) experiments, important thermal properties and characteristics of the nanocomposites were studied, such as the degree of crystallinity, melting temperature, crystallization and glass transition. Dynamic Mechanical Analysis (DMA) experiments were then performed to investigate the dynamical mechanical response of nanocomposites, in a wide area of temperatures and frequencies and the master curves were extracted, according to the Time-Temperature Superposition principle (TTS), in order to investigate the rheological response of nanocomposites. In addition, the mechanical response of the materials to static tensile experiments was also studied, identifying important mechanical properties of the nanocomposites. This was followed by the detailed modeling and approximation of the experimental Young modulus, by using the modified analytical inclusion model, which is a combination of the model, presented by Mori-Tanaka, Benveniste and the micromechanical models of Tsai-Pagano and Cox-Krenchel. Also, the experimental results of the Young modulus were approximated, by using Finite Element Methods and homogenization techniques. Suitable representative volumes (RVEs) were generated that also include the agglomeration and curvature parameters of the CNTs/CNFs. In addition, local representative volumes were created to make a representation of the von Mises stress distribution at the surface of the nanofillers. Finally, the viscoelastic properties of the nanocomposites, such as creep and recovery under different stress values, were comparatively studied, by using an appropriately modified viscoelastic model, which was used to approximate the experimental results.Studying the morphology of the materials, it was observed that the nanofillers generally have good dispersion and adhesion to the polymeric matrices, while forming agglomerates at high contents. Interactions of polymeric matrix-nanofillers and nanofiller-nanofiller were also detected, by using spectroscopic techniques. It has been observed that MWCNTs have the highest degree of defects in their crystal structure, higher than the CNFs and GOs, while the addition of the mLLDPE polymeric matrix leads to a reduction of the defect density. In addition, GO/CNT hybrid systems exhibit strong interactions between GO-CNT nanofillers and this may be an indication of synergy between them. Also, it was observed for all the materials, that CNTs play a crucial role in increasing the electrical conductivity of nanocomposites and above a specific fillers’ content (percolation threshold), they form a conductive percolated network in the polymeric matrix. Regarding the thermal results, the role of nanofillers as nucleating agents was confirmed. The glass transition temperature (Tg) and melting point (Τm) in most materials do not change, by increasing fillers’ content, while the crystallization temperature (Tc) increases. Also, the degree of crystallinity (Xc) increases for nanocomposites and especially for hybrid materials. In the PLA series, the phenomenon of cold crystallization was observed and an increase of the cold crystallization temperature (Tcc) was detected for the nanocomposites. Regarding the dynamic experiments, mechanical reinforcement of all nanocomposites and hybrid materials was observed, with the GO/CNF hybrids having the higher values compared to GO/CNT. At low frequencies, there was strong evidence of dense network formation from the nanofillers and the rheological response of materials as solid-like materials. In addition, there was a significant increase in the Young Modulus, yield stress, tensile strength and creep resistance with increasing content, for all the materials. The Young’s modulus was effectively approximated using a modified analytical model and the homogenization method (Finite Element Analysis). Finally, the response of materials to creep-recovery was modeled, using a modified viscoelastic model with a significantly smaller number of parameters than established models in the international literature. From the results obtained from all experimental methods, we come to the conclusion that the type and complexity of the polymeric matrix, the dispersion of the inclusions in the polymeric matrix and also their geometry are crucial parameters for the properties of the nanocomposites.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Charitos, Ilias
- Χαρίτος, Ηλίας
Subjects
dc:subject × 46- Πολυμερικά νανοσύνθετα υλικά
- Μεταλλοκένιο γραμμικό πολυαιθυλένιο χαμηλής πυκνότητας (mLLDPE)
- Πολυγαλακτικό οξύ
- Νανοσωλήνες άνθρακα
- Νανοίνες άνθρακα
- Οξείδιο του γραφενίου
- Θερμικές ιδιότητες
- Μηχανικές ιδιότητες
- Ηλεκτρικές ιδιότητες
- Μέθοδος πεπερασμένων στοιχείων
- Διαφορική θερμιδομετρία σάρωσης (DSC)
- Δυναμική μηχανική ανάλυση (DMA)
- Φασματοσκοπία ράμαν
- Διηλεκτρική φασματοσκοπία (DRS)
- Πειράματα εφελκυσμού
- Θεωρία ομογενοποίησης
- ΕΡΠΥΣΜΟΣ-ΕΠΑΝΑΤΑΞΗ
- Ηλεκτρονική μικροσκοπία σάρωσης
- Polymer nanocomposites
- Metallocene linear low density polyethylene (mLLDPE))
- Polylactide (PLA)
- Carbon nanotubes (CNT)
- Carbon nanofibers (CNF)
- Graphene Oxide (GO)
- Thermal properties
- Mechanical properties
- Electrical properties
- Finite element method
- Differential scanning calorymetry (DSC)
- Dynamic mechanical analysis (DMA)
- Raman spectroscopy
- Scanning electron microscopy
- Tensile experiments
- Dielectric relaxation spectroscopy
- Homogenization
- Creep and Recovery
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολυμερή και Πλαστικά
- Νανοτεχνολογία
- Νανοϋλικά
- Materials Engineering
- Engineering and Technology
- Polymers and Plastics
- Nano-Technology
- Nano-materials
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52002