Aristotle University Of Thessaloniki (AUTH)
Plasmo-photonic integrated circuits for interconnect and sensing applications
Abstract
dc:descriptionThanks to advanced semiconductor fabrication technology, Complementary Metal-Oxide-Semiconductor (CMOS)-enabled Photonic Integrated Circuits (PICs) constitute a major driving force to address the requirements in a diverse range of applications, spanning from optical interconnects to optical biosensing. Nevertheless, as market demands continue to increase every day, modern photonic integrated devices are approaching their size and performance limits. In this context, a harmonic and balanced combination of silicon photonics with CMOS plasmonic elements has been proposed as the key enabling technology that is expected to bring a revolution in photonic integrated circuits. As such, the main contributions of this thesis focused on the development of novel plasmo-photonic waveguides and devices in alignment with CMOS fabrication standards towards on-chip communications and biosensing applications. Initially, the co-integration of Aluminum stripe plasmonic waveguides with Si3N4 photonics, employing fully CMOS compliant materials was investigated. Si3N4 photonics have been employed as an alternative dielectric platform instead of SOI, in an attempt to exploit their lower propagation losses, manufacturing cost and wavelength transparency. Experimental characterization on fabricated samples revealed SPP propagation length in air equal to 50 μm at 1550 nm telecom wavelength. The proposed co-integration scheme facilitated on-chip excitation of the SPP modes, relying on a butt-coupled Si3N4-to-Al interface with experimentally measured loss of 4.4 dB, avoiding the use of bulk optics. Furthermore, world’s first WDM data traffic experiment at 200 Gb/s over a CMOS aluminum SPP waveguide is also presented. The signal integrity characteristics of the aluminum SPP waveguide were validated via BER measurements revealing error free operation for all channels with negligible power penalties. Demarcating from on-chip optical communications, a CMOS plasmo-photonic platform in view of biosensing applications is presented. More specifically, the co-integration of Si3N4 photonics with open cladded and water loaded Al-based stripe and slot Surface Plasmon Polariton (SPP) waveguides was investigated, exploiting a butt and vertical directionally coupled Si3N4–to-plasmonic interfaces that demonstrated experimental insertion loss around 2.7 dB in aqueous environment at telecom wavelengths. Subsequently, a benchmarking between the performance characteristics of the two plasmo-photonic waveguides is presented, including metrics such as propagation length, effective mode area, phase change per unit length and bulk sensitivity when incorporated in MZI sensor. Moving far deeper into the development of plasmo-photonic circuits for sensing applications, a novel plasmonic-assisted Si3N4 refractive index sensor scheme with optimization and multifunctional capabilities is proposed. According to the results of the above benchmarking, stripe-based SPP waveguides shows higher Lspp values along with higher sensitivity characteristics. Therefore, the plasmonic stripe waveguide was selected to realize the sensing transducer of the proposed plasmo-photonic sensor. More specifically, the proposed sensor comprised of a Si3N4 based Mach-Zehnder Interferometer (MZI) that employs a 70 μm long open cladded SPP stripe waveguide in the sensing arm. The reference arm of the MZI sensor consist of a thermo-optic heater-based phase shifter for tuning the sensor’s resonance wavelengths followed by a Variable Optical Attenuator (VOA) as the means to maximize the Extinction Ration (ER) for increased spectral resolution. Gold (Au) was initially deployed as the reference material, considering its maturity in plasmonic biosensing applications. Experimental evaluation of the proposed sensing device revealed bulk sensitivity values up to 1930 nm/RIU, along with an extinction ratio of more than 35 dB, demonstrating the functional benefits of the co-integration of plasmonic and photonic waveguides. Following the successful demonstration of gold-based plasmo-photonic sensor, aluminum was employed as the metal material for the sensing transducer as the means to offer a CMOS compatible material platform, enabling volume manufacturing. Bulk sensitivity was evaluated with various aqueous solutions, showcasing record-high bulk sensitivity values of 4764 nm/RIU with clear potential to scale up the bulk sensitivity values even more by properly engineering the design parameters of the MZI, harnessing the sensing capabilities of a miniaturized (7μm 70μm) plasmonic transducer. In a nutshell, the proposed CMOS compatible plasmo-photonic platform, exploiting Al as the plasmonic metal, offer durability to liquid claddings, ultra-high bulk sensitivity values and validated WDM signal integrity characteristics, highlighting a clear roadmap for the development of future high-performance and low-cost devices in the areas of optical interconnects and biosensing.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Manolis, Athanasios
- Μανώλης, Αθανάσιος
Subjects
dc:subject × 20- Αισθητήρες, Φωτονικός
- Επιφανειακά πλασμόνια
- Ολοκληρωμένα φωτονικά κυκλώματα
- Πλασμονική τεχνολογία αλουμινίου
- Συμβολόμετρο Mach Zehnder
- CMOS τεχνολογίες
- Οπτικές διασυνδέσεις
- Aluminum plasmonics
- Silicon Nitride photonic waveguides
- CMOS plasmo-photonic waveguide platfrorm
- Optical interconnects
- Plasmonic sensors
- Mach-Zehnder interferometric sensors
- Refractive index sensors
- Επιστήμη Ηλεκτρονικών Υπολογιστών και Πληροφορική
- Φυσικές Επιστήμες
- Δίκτυα ηλεκτρονικών υπολογιστών και Επικοινωνίες
- Computer and Information Sciences
- Natural Sciences
- Computer Networks and Communications
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52034