Democritus University of Thrace (DUTH)
Μηχανικά χαρακτηριστικά και ανθεκτικότητα σκυροδεμάτων παρασκευασθέντων με σκωρία χαλυβουργίας
Abstract
dc:descriptionThe research objective of this thesis is to investigate the feasibility of using electric furnace slag and ladle furnace slag as aggregates, to produce common concretes. These slags are industrial by-products of the steel industry.The aim of the thesis is the preparation of concretes with slag aggregates, which will be widely used in ordinary constructions. The use of slag, as aggregate, for the production of conventional concrete is a part of the research that few researchers have dealt with, as most studies concern special concretes (heavy, fire-resistant, etc.), which are applied in special constructions and projects.In addition, the European Regulation sets a limit for the replacement of only coarse aggregates (> 4 mm) for the use of recyclable aggregates without a replacement rate of more than 30%, for the usual strength and environmental exposure categories. In the present study, the slag aggregates replaced the conventional ones in smaller but also higher percentages, including the fine aggregates. The experimental part of the thesis, in particular Phase A of Preparations, concerns the study of three strength classes, C20/25, C25/30 and C30/37. For each of these categories it was decided to prepare the following concretes for each one of these strength classes: Conventional mixture, with limestone aggregates, used as reference for comparison with the other mixtures. Mixtures where limestone sand replaced by EFS sand at 10%, 20%, 30%, 50%, 75% and 100% ratios. Mixtures where limestone sand replaced by LFS sand at 10%, 20%, 30% and 50%, ratios. Mixtures where limestone gravel replaced by EFS gravel at 50% and 100% ratios. Mixtures where limestone coarse aggregates replaced by EFS coarse aggregates at 25%, 50%, 75% and 100% ratios. Specimens were prepared for each of the above concretes and mechanical and durability properties were tested, which were compared with the corresponding properties of conventional concretes, which were used as reference concretes.Then, all the above data were studied, evaluated and analyzed and the most durable mixtures were selected, among them that could also be used in conventional structures as conventional concretes.In this first phase of preparations, where almost 60 mixtures were produced, the results show that the replacement of conventional aggregates with slag aggregates has a beneficial effect on almost all the properties studied.Based on the above analyses and assumptions, as well as on the results, it was selected to produce additional mixtures, that combined the replacement of the fine and coarse slag aggregates. Specifically, it was chosen to simultaneously replace the limestone sand with EFS sand at 30% and the limestone gravel with EFS gravel at 50%. In addition, the simultaneous replacement of conventional limestone sand was chosen, with both EFS sand and LFS sand at 30% each and replacement of the limestone gravel with EFS gravel at 50%. The above mixtures were produced for all three strength classes and are referred to in this thesis as Phase B of Preparations.These concretes were compared with the most durable and at the same time functional Phase A concretes, namely, the concretes with replacement of the sand with slag sand of electric furnace but also with ladle furnace slag sand in percentages of 30% and 50% in both cases. These two new mixes further improve the strength and durability indicators studied. The seventh chapter of the doctoral thesis records the environmental impact of all mixtures. Using data from the Doctoral Thesis of Dr. Alexandros Liapis, "SPECIFICATION OF THE PARAMETERS FOR LIFE CYCLE ASSESSMENT AND COST ASSESSMENT OF UNREINFORCED CONCRETE APPLICATIONS”, who recorded in detail all the environmental flows of materials used in the production of concrete, the effect of each concrete is described and calculated for all the environmental impact categories included in the above research.The categories of impacts that are evaluated, both in the doctoral dissertation of Alexandros Liapis and in the present one, are those proposed by the Standard EN 15804.The results confirm that slag aggregate concrete leads to a reduction of the environmental footprint of the construction.The main conclusions from the laboratory study of all these concretes are: Partial replacement of limestone conventional aggregates with slag aggregates not only did not reduce the mechanical and durability properties of concretes, but on the contrary, all properties either remained stable or improved compared to the reference concretes. The compressive strength has increased from the age of 7 days and afterwards and continued until the one year. The resistance to carbonation was impressive in slag mixtures. Analysis of the lifespan of constructions carried out in Phase B of preparations, based on the results of natural carbonation, showed that only the reference mixtures C20/25 and C25/30 did not reach the 50-year lifetime without repair. In contrast, all mixtures with slag aggregates studied in the Preparation Phase B exceeded this limit, which means that structures with these concretes do not need to be repaired during their service life. Resistance to chloride penetration increased significantly in mixtures with slag aggregates. Life time analysis was, also, performed in this case for all concretes of all three strength classes, based on four chloride measurements conducted in four ages. Out of the 54 concretes with slag aggregates, none showed a shorter life time than the corresponding reference concrete, while the compositions produced during Phase B increased the life time dramatically. Coarse slag aggregates improve the workability of concrete. On the other hand, fine slag aggregates and mainly ladle furnace sand greatly reduces its workability. As an industrial by-product, slag, as examined in this thesis, is a material that, when used in concrete, can lead to the production of economical and time-resistant structures, contributing to the viability of constructions. At the same time, the economic benefit is already evident from the moment the mixtures are produced and throughout the life of the constructions, while the environmental footprint of concrete is reduced. All of the above constitute the definition of the sustainability of constructions.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Chatzopoulos, Alexandros
- Χατζόπουλος, Αλέξανδρος
Subjects
dc:subject × 13- Σκωρία ηλεκτρικού κλιβάνου
- Σκωρία κάδου
- Ανθεκτικότητα
- Electric furnace slag
- Ladle furnace slag
- Durability
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Κατασκευή και Οικοδομική τεχνολογία
- Πολιτική μηχανική
- Civil Engineering
- Engineering and Technology
- Construction and Building technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52120