University of Patras
Η ρόφηση και η δραστικότητα της φουρφουράλης σε πρότυπους μονομεταλλικούς και διμεταλλικούς καταλύτες νικελίου, χαλκού και λευκόχρυσου
Abstract
dc:descriptionIn the present work, the interactions of furfural, a multifunctional molecule, as well as other furanic derivatives, were studied on model monometallic and bimetallic surfaces, with a combination of experimental methods (TPD, LEED, UPS, XPS and VCKP) under UHV conditions and computational approaches (DFT). The primary goal was to explore the surface chemistry of different Ni crystallographic facets, both in terms of activity and selectivity for the hydrogenation of furfural to high added value compounds such as furfuryl alcohol and 2-methylfuran. More specifically, we have studied the stepped Ni(119) (also described as 5Ni(001)×(111)) and the planar Ni(111) surfaces. The effect of modifying the model nickel surfaces with Cu towards the adsorption and the selective hydrogenation of furfural was also studied. Finally, the reactivity of furfural on the model Pt(111) catalytic surface, which corresponds to the most thoroughly studied system, are presented; thus, the results may be utilized as a reference point for the corresponding studies on the monometallic and Cu based bimetallic Ni(119) and Ni(111) surfaces.Initially, the growth of copper on Ni(119) and Ni(111) was studied together with its impact on nickel’s surface chemistry. The results show that the copper at ambient temperature grows pseudomorphically in a layer-by-layer mode on both surfaces. Cu deposition appears to begin on the stepped Ni(119) surface by occupying 4-fold hollow sites below the step edge before migrating along the terrace atoms. At low-coverage regimes, the interaction of Cu with the Ni(119) surface appears to be stronger as compared with the flat Ni(111) surface, suggesting enhanced charge transfer from Ni to Cu via a s-d rehybridization mechanism. The Smoluchoswki effect and the induced perturbation of the surface electron density in the presence of the monatomic step support the above conclusion. Increasing the concentration of Cu, reduces both the capacity of the surface to adsorb CO as well as its desorption temperature. This result may be attributed to the geometric blockage of the active sites and also to the decrease of the CO adsorption strength on Ni, which is consistent with a change in the surface's electronic properties.Following that, the adsorption and reactivity of furfural was investigated on the clean and carbon passivated stepped Ni(119) surfaces at various Cu surface concentrations. According to TPD findings, furfural decomposes to produce furan, 2-methylfuran, CO, and H2. Furfural can be hydrogenated to 2-methylfuran via the formation of surface intermediate hydrogenation product (furfuryl alcohol) which is followed by the hydrodeoxygenation reaction (HDO) . The activation of the C=O bond of the aldehyde group via strong adsorption in the η6-η7 configuration together with the self-hydrogenation of furfural were ascribed to the initiation of the HDO reaction of furfural on the clean Ni(119) surface. The observed self-hydrogenation was interpreted based on the structural sensitivity of surface , which shows improved oxophilicity along the monatomic steps, favoring the activation of C-H bonds over C-C bonds. Increasing the concentration of Cu resulted in a reduced interaction of the molecule with the surface (η1-σ(O) configuration), leading to an overall decrease of the conversion and simultaneously to an enhanced selectivity to furan. Interestingly, carbon passivation of the substrates completed inhibits the available self-hydrogenation pathways. Furthermore, the adsorption and reactivity of furfural was studied on the clean Ni(111) surface and Cu modified surfaces. The TPD findings reveal that furfural desorbs dissociatively on the Ni(111) surface, yielding mainly propylene, carbon CO, H2, as well as 2-methylfuran at lower quantities. The presence of Cu on the Ni(111) surface, shifts the selectivity towards furan and 2-methylfuran, and also reduces the overall conversion. Furthermore, the formation of propylene, even in the presence of adsorbed hydrogen, implies that the presence of functional groups on furfural and furfuryl alcohol, significantly affects the available reaction pathways. Finally, the findings shows that the change in furfural adsorption geometry from η6 to η1-σ(O) in the presence of Cu and hydrogen on the Ni(111) surface, enhances the selectivity towards the formation of furan and furfuryl alcohol via the selective interaction of the carbonyl group with the surface.Finally, the electronic interaction of furfural with the Pt(111) single crystal surface was examined and the observed changes were correlated with its activity. According to the findings, furfural adsorbs non-dissociatively at low temperatures (175 K), whereas the molecule-metal bond at low coverages involves hybridization of the extended π orbitals of the aromatic ring with the Pt5d band. The molecular desorption of furfural from the clean Pt(111) surface is followed by decarbonylation products such as furan, CO, H2, and residual surface carbon at higher temperatures. The electronic perturbation of the surface around the hydrogen adsorption site, favors the hydrogenation of furfural to furfuryl alcohol and 2-methylfuran, resulting in selective activation and subsequent hydrogenation of the carbonyl group. The present study is consistent with the current notion that the selectivity towards furfuryl alcohol and 2-methylfuran is enhanced when the ring is not coordinated parallel to the surface.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tsatsos, Sotirios
- Τσάτσος, Σωτήριος
Subjects
dc:subject × 24- Ετερογενής κατάλυση
- Επιστήμη επιφανειών και διεπιφανειών
- Φουρφουράλη
- ΚΑΤΑΛΥΤΙΚΗ ΥΔΡΟΓΟΝΩΣΗ
- Βιομάζα
- Ανανεώσιμες μορφές ενέργειας
- Τσάτσος Σωτήριος
- FURFURAL
- Heterogeneous catalysis
- Surface science
- Biomass conversion
- Sustainability
- Tsatsos Sotirios
- CATALYTIC HYDROGENATION
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Περιβαλλοντική Μηχανική
- Ανανεώσιμη ενέργεια, Αειφορία και Περιβάλλον
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
- Environmental Engineering
- Renewable Energy, Sustainability and the Environment
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52234