National Technical University of Athens (NTUA)
Ηχοχημική σύνθεση Metal Organic Frameworks (MOFs) για ηλεκτροκαταλυτικές εφαρμογές
Abstract
dc:descriptionThe aim of the current doctoral dissertation is the study of the use of ultrasounds as an alternative way of preparing MOFs, its direct comparison with conventional methods, and their characterization, in order to achieve lower reaction time, shorter particle size and improved final properties, whereas selected MOFs were tested as electrocatalysts. 9 MOFs structures were prepared, of which 5 sonochemical preparations are new in the literature. MOFs have been characterized by X-ray diffraction (XRD) and Rietveld analysis to identify their crystal structure, Scanning Electron Microscopy (SEM) to study morphology and size distribution, and Thermogravimetric Analysis (TGA) to study their thermal stability. Firstly, 2,5-dihydroxy terephthalic acid (H4dhtp) was studied as the organic linker and in particular with cobalt as the metal center to form the Co-MOF-74 structure. During the preparation of this MOF (through a series of 14 experiments) the ultrasound conditions, such as the amplitude and the reaction duration, were fully investigated for their optimization, showing a direct correlation towards the crystallinity and the particle size. It was observed that shorter reaction times (~30 min) and lower amplitude (<65 %) can lead to smaller particles but also smaller crystallites (as calculated via the Scherrer equation). In addition, Mg, Zn, Ni and Mn were also used as metal centers producing the same chemical structure (M2dhtp) and crystal system of MOF-74 (Trigonal, R 3 ̅ (No. 148)), as a way to study the different properties that each metal offers in the final MOF structure. On the other hand, alternative metals, such as calcium and strontium, which are chemically related to magnesium, since they belong to the group of alkaline earths, were examined as well. Following the experimental conditions of MOF-74, CPO-22 with Sr(H2dhtp)(H2O) formula, which belongs to the monoclinic crystal system (C2/c (No. 15)) was successfully prepared by both synthesis methods. In contrast, for calcium, CPO-20 with the chemical formula Ca(H2dhtp)(H2O)2, which belongs to the monoclinic crystal system (P21/n (No. 14)), was only obtained through the sonochemical synthesis, whereas the solvothermal method yielded Ca(H2dhtp)(DMF), which belongs to the triclinic crystal system (P 1 ̅ (No. 2)). In addition, other organic ligands such as adipic acid (adp), 2-methylimidazole (Hmim), trimesic acid (H3BTC) and 4,4΄-dipyridine (bpy) were also used to form Zn-adp, ZIF-8 (Zn-mim), HKUST-1 (Cu-BTC)/MOF-808 (Zr-BTC) and Ni-BTC-bpy structures respectively. The energy-related electrochemical applications investigated in this dissertation include the carbon dioxide reduction and zinc-air batteries. In particular, a lab-scale dual electrochemical cell (H-type) was designed and the necessary analysis protocol was set up in order to study some of the prepared MOFs on the CO2 reduction reaction (CO2RR). Their electrocatalytic activity was investigated via the faradaic efficiency (FE) as quantified by gas chromatography. A series of zinc-based MOFs (ZIF-8, Zn-adp, Zn-MOF-74) were chosen, prepared both conventionally and sonochemically, which have CO as their main product leading to satisfactory FE. However, the limitation of hydrogen evolution reaction (HER) remains a major problem in the literature as a CO2RR competitive reaction. Finally, a preliminary study was performed on the application of MOFs in Zn-air batteries, comparing and evaluating MnO2, which is popular in the literature for its electrochemical properties, a combination of MnO2-MWCNTs and the sonochemically prepared Ni-MOF-74 and HKUST-1(Cu) as cathodes. The MOFs gave satisfactory results, achieving quite good stability in short charge-discharge cycles (more than 360 consecutive cycles lasting 120 hours) without cell deterioration, but further research is needed to select suitable metal centers and ligands, while their catalytic activity could be enhanced by incorporating carbon structures and/or metal oxides.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vaitsis, Christos
- Βαΐτσης, Χρήστος
Subjects
dc:subject × 20- Metal Organic Frameworks (MOFs)
- Ηχοχημεία
- Ηλεκτροκατάλυση
- Αναγωγή του CO2
- Μπαταρίες Ψευδαργύρου-Αέρα
- Sonochemistry
- Electrocatalysis
- CO₂ Reduction
- Zinc-Air Batteries
- Χημεία
- Φυσικές Επιστήμες
- Χημεία, γενικά
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημική μηχανική
- Chemical Sciences
- Natural Sciences
- Chemistry, general
- Chemical Engineering
- Engineering and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52336