National Technical University of Athens (NTUA)
Κατασκευή σύνθετων υλικών πολυμερικής μήτρας με την προσθήκη ανακυκλούμενων υλικών από απόβλητα κατεδάφισης κτιρίων και μελέτη μηχανικών και θερμικών ιδιοτήτων τους
Abstract
dc:descriptionPolymer matrix composites (PMCs) are extensively used in numerous applications nowadays. The low cost, simple manufacturing techniques and the relatively good properties that these materials exhibit, have placed them in a dominating position in many technological and scientific aspects.Moreover PMCs are also characterized by significantly good heat insulation efficiencies in comparison to conventional materials. This is attributed to the low thermal conductivity coefficient of the polymer system that is usually used to form the PMCs’ matrix and has led to their wide utilization in many applications within the construction sector.During the last decades, researchers have focused on the development of materials with enhanced mechanical properties. The high costs of some reinforcing additives however, have driven scientific research into the consideration of alternative kinds of filling (embedding additives) materials in composites’ manufacturing.At the same time, environmental awareness issues created the circumstances under which byproducts of various human activities were reviewed and exploited as potential fillers in PMCs’ manufacturing. On the other hand, the issue concerning the treatment of byproducts deriving from construction, demolition, and renovation projects combined with the good thermo-mechanical characteristics of these materials, has intrigued the interest of scientists. A significant number of research papers in which holistic management strategic plans were introduced in order to optimize the recycling of construction and demolition (C&D) waste stream were published. Up until now however, many countries worldwide have been unable to meet the demands of environmental legislation and achieve the extremely high (in terms of quantities) targets set for the recycling of waste produced from the construction sector. As a result, environmentally harmful treatment methods such as landfilling and illegal dumping are still in use in the management of this specific waste stream.The high recovery potential of these materials, which at the moment remains unexploited, has focused the most recent research efforts on the development and study of new composite materials embedding construction and demolition wastes as filler in the form of micro-powder.The purpose of this dissertation is to investigate the possibility of manufacturing polymer matrix composite materials in which processed C&D waste of different granular sizes and % w/w proportions in form of powder are embedded as fillers, via the study of their mechanical and thermal characteristics.The degree of innovation of this research work is important considering that the introduction of C&D waste powder in thermoset polymers results in the production of materials with good mechanical and thermal insulating properties. In addition, through the manufacture of the above composite materials, an alternative and innovative way of exploiting the by-products of the construction sector is introduced, which are produced in very large quantities worldwide every year. In terms of processing and exploitation, the best scenario for the utilization of these materials, if not dumped in landfills or in illegal areas of uncontrolled disposal, is their recovery through the rehabilitation of quarries and the formation of substrates in rural road projects, mainly.The results of this study will lead to useful conclusions about the possibility of exploiting waste of similar type as fillers in the development of new construction materials such as marble mining and processing residues, concrete and cement industry waste, brick construction waste, etc.In the present study, thermosetting polymer composites of epoxy resin (ER), unsaturated polyester (UP), and novolac resin (N) embedding pulverized C&D waste in micro-scale sizes were developed using manufacturing techniques that have been described in previously mentioned studies. More specifically, composite materials of polymeric matrix were made by adding demolition waste (as a filler) with flexural strength values (σb) in the range between 20-60 MPa, shear strength (τb) with values between 1-8 MPa and thermal conductivity coefficients (λ), between 0.27-1.20 W /m K. The materials developed incorporate AKK in percentages of 30-50% by weight and in correspondence with the resin used as a matrix.Through Scanning Electron Microscopy (SEM) X-Ray Diffraction (XRD), the morphological characterization of these materials was performed and conclusions about the dispersion of the filling material in each of the three different polymeric matrices mentioned above were drawn. At the same time the identification of possible defective locations such as voids, bubbles, etc. in the resulting composites was also carried out.All the composites that were made and studied presented a brittle-type fracture. Besides that they were characterized by reduced bending and shear strengths compared to these of pure polymeric materials, as a consequence of the increase of the filling powder content in the composites.On the contrary, the thermal properties of these materials and in particular their thermal insulation performance was improved in comparison to the materials made of 100% resin, as a result of the increasing content of C&D waste filler in the composites.The results of the studies carried out indicate that these materials can be used as alternatives in various structural applications. Their low cost and easy curing process in combination with their adaptability to the conditions and requirements of many structural applications favors the composite materials of polymeric matrix with C&D waste as a reliable solution.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bogiatzidis, Konstantinos
- Μπογιατζίδης, Κωνσταντίνος
Subjects
dc:subject × 16- Σύνθετα υλικά πολυμερικής μήτρας
- Μηχανικές ιδιότητες
- Θερμικές ιδιότητες
- Χαρακτηρισμός υλικών
- Απόβλητα κατασκευών και κατεδαφίσεων
- Polymer-matrix composites
- Mechanical properties
- Thermal properties
- Materials characterization
- Construction and demolition wastes
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Materials Engineering
- Engineering and Technology
- Materials Science, Characterization and testing
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52346