National Technical University of Athens (NTUA)
Ηλεκτρονικές διατάξεις εναλλαγής αντίστασης και αισθητήρες νανοσωματιδίων σε εύκαμπτα και εκτατά υποστρώματα
Abstract
dc:descriptionIn recent years, the continuous accelerating development of the Internet of Things has created a new field of research, merging various scientific fields. The development of modern hardware as well as software technologies, capable of collecting and processing big data sets to connect them and exchange the collected data with other devices and systems, either via the internet or other communications protocols, becomes imperative. The electronic devices which for many decades were fabricated on conventional silicon substrates, no longer meet the requirements of current human needs. Thus, in recent years, in parallel with the development of innovative electronic devices that serve the needs of modern times but also improved electronic devices to existing ones, there has been strong research interest in the fabrication of electronic devices on flexible and stretchable substrates. The rapid development of wearable electronics has forced the focus towards research on the development of electronic devices, with random access memory (RAM) and sensors being the key representatives. The combination of these two devices can lead to an integrated system for recording and storing information in real time (real-time monitoring). Applications of this system may include the recording of various physiological parameters of human activity, such as strain, heart rate, body temperature, humidity or even recording blood glucose. Depending on the application, is defining the requirements that each sensor should meet. Then, by employing a non-volatile memory (non-volatile RAM), the data detected by the sensor can be stored. The aim of this dissertation is the fabrication of non-volatile resistive random-access memories on flexible substrates, the fabrication of strain and stretchable sensors on flexible and stretchable substrates, and the development of communication between them. In the present work, conductive bridge random access memories (CBRAM) were developed, where after the study of various materials, for both fabrication of the memories and the substrate to which they were developed, the development of fully functional resistive memories under high strain load was achieved. Resistive memories were developed on polyethylene naphthalate (PEN) substrates, a material that is gaining ground in the global market due to its unique properties. The most important step in the fabrication of these devices, is the deposition of a dense film of platinum nanoparticles (Pt NPs) on the substrate, as a first step towards the fabrication of the resistive memories. This leads the devices to remain fully functional even after high mechanical strain since Pt NPs assist the bottom electrode (BE) to remain conductive. The materials that were used to fabricate memristors are a dense film of Pt NPs and a thin film of titanium nitride (TiN) for the lower electrode, silicon dioxide (SiO2) as an active material, and silver (Ag) for the top electrode (TE). The devices remain fully functional after many strain cycles, presenting a large memory window, while at the same time having low power consumption. In addition, various neuromorphic properties were recorded, important for the development of electronic devices with applications in artificial neural networks. After the development of a reliable process for the fabrication of flexible artificial synapses, our research continued in the direction of the stretchable sensors. The sensors were fabricated on polydimethylsiloxane (PDMS) substrates. After the synthesis of the substrate, pre-stretched was applied to it, a thin film of Al2O3 was deposited and then a dense film of Pt NPs. After the samples' relaxation to their' initial length, Ag electrodes were patterned. The sensors show three to four different areas of sensitivity, depending on their initial pre-stretch during their fabrication. The initial pre-stretch of the substrate determines not only the number of areas of sensitivity but also their width. Thus, we can adjust the sensitivity area of each sensor depending on the application. Finally, the flexible memory and the sensor are connected in a circuit with the memory storing the sensor information when it is amplified to a critical value.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papakonstantinopoulos, Charalampos
- Παπακωνσταντινόπουλος, Χαράλαμπος
Subjects
dc:subject × 16- Μνήμες εναλλαγής αντίστασης
- Aισθητήρες νανοσωματιδίων
- Νευρομορφικές ιδιότητες
- Εύκαμπτα ηλεκτρονικά
- Εκτατά ηλεκτρονικά
- Resistive switching memories
- Nanoparticle sensors
- Neuromorphic properties
- Flexible electronics
- Stretchable electronics
- Νανοτεχνολογία
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοεπιστήμη και Νανοτεχνολογία
- Nano-Technology
- Engineering and Technology
- Nanoscience and Nanotechnology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52753