Aristotle University Of Thessaloniki (AUTH)
Μελέτη καινοτόμων τεχνικών παθητικού ελέγχου ροής σε εφαρμογές αεροναυτικής
Abstract
dc:descriptionThe goal of the present thesis is to study the application of novel passive flow control (PFC) techniques on various aeronautic reference platforms that operate in the low speed, subsonic regime (Mach < 0.3). It is a step-by-step research investigation, the objectives of which are outlined below: •Investigation of the flow field around reference platforms.•Research of possible PFC techniques for increased reference platform efficiency and performance augmentation (technology screening).•Selection and detailed investigation of the PFC technique with the greatest potential.•Application of the most promising PFC technique to the various reference platforms, performance evaluation and performance comparison with conventional PFC techniques.This applied aerodynamics research is supported by a wide variety of tools, to ensure an all-round approach. Namely, high-fidelity (CFD) computational tools, as well as experimental facilities and techniques, including Laser Doppler Anemometry (LDA) velocity and force balance measurements in a closed-circuit windtunnel have been used. It should be noted at this point, that the experimental facilities were appropriately modified and upgraded to support the corresponding calculations and experimental investigations. In the last decades, a large growth of platforms operating in lower Reynolds numbers (105-106) compared to the more usual research range (107-108) can be observed. Such platforms are the Unmanned Aerial Vehicles (UAVs) and Small Horizontal Wind Turbines (SHWT). However, during the conceptual design of UAVs and SHWTs, mostly older textbooks are used, even though UAVs and SHWTs are generally smaller in size and operate at lower velocity. The assumption that UAVs and aircrafts (or SHWTs and large WTs) have exactly the same design rules leads to non-optimized geometries, something that makes the integration of flow control techniques necessary. However, in order to accurately apply flow control techniques, their working mechanism needs to be completely comprehended.An extensive literature review showed that there are several existing studies that describe conventional and novel PFC techniques. However, their integration was for a very long time an empirical procedure, rather than a scientific approach. The available understanding of the flow mechanisms of each PFC technique is very limited. Furthermore, most of the published experimental data focus on low Reynolds numbers, especially for novel FCT techniques. Therefore, the need for a dedicated flow control study of a promising technique (tubercles) remains largely unaddressed. The unique aspects of this research and contributions to the field are listed as follows:•A thorough literature and computational study is made for the application of PFC techniques on various platforms at low subsonic speeds for Reynolds numbers ranging from 100,000 up to 10,000,000.•Α design methodology regarding turbulence generating grid for windtunnel experiments is proposed.•A thorough investigation of the aerodynamic effect of the tubercles on key geometrical parameters, such as airfoil thickness and sweep, is carried out.•A thorough numerical investigation of tubercles for Reynolds numbers greater than 5·105, which is the upper limit in the available literature experiments, is carried out. These studies cannot replace experiments but highlight a definite trend.•A categorization of tubercles flow mechanism is proposed. It is suggested that under different conditions (angle of attack, geometric parameters) tubercles behave sometimes as vortex generators and sometimes as wing fences.•A dimensionless size for tubercles is proposed, based on the geometry characteristics (Α and λ), something that leads to easy comparison and application.In the framework of this thesis, initially a set of reference platforms was selected, with requirements and operating conditions clearly defined. The geometry layout specifications are explicitly mentioned, while experimental, analytical and numerical tools are used to describe the flow phenomena associated with these platforms. In addition, a variety of conventional and novel PFC techniques is presented. A literature study is carried out regarding the advantages and the possible potential of these techniques, with the tubercles being selected for further evaluation.For almost every reference platform a conventional PFC technique is also applied in order to compare their effectiveness with that of tubercles, which are tailored to each reference platform based on literature suggestions. CFD calculations and visualization studies are employed to assess the results of both tubercles and conventional techniques. The selected turbulence models are validated through literature suggestions and numerical studies. Indicatively, results showed that the appropriate use of tubercles can increase the efficiency of a reference platform up to 10% for all examined Reynolds numbers.Based on these results, some useful conclusions can be extracted. The tubercles mechanism seems to be of dual nature, acting sometimes as vortex generator and sometimes as wing fence, depending on various conditions. Tubercles seem to be more effective on platforms with thick airfoils, where the flow structures remain attached on the wing surface, unlike platforms with thin airfoils, where leading edge vortices are shed almost immediately.Summarizing, the analysis emphasizes on the study of a novel PFC technique, namely tubercles, and the effect of its application on various reference platforms. Appropriate use of tubercles can enhance the aerodynamic characteristics of a platform (lift increase, stall delay, pitching moment delay, efficiency increase). Finally, the results helped showcase and better understand the dual nature of the tubercles mechanism. By implementing an optimized tubercle setup, an aerodynamic platform can enjoy the positive aspects of both vortex generators and wing fences.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papadopoulos, Charalampos
- Παπαδόπουλος, Χαράλαμπος
Subjects
dc:subject × 14- Παθητικός έλεγχος ροής
- Υπολογιστική ρευστομηχανική (CFD)
- Μη επανδρωμένα αεροχήματα
- Μικρές Ανεμογεννήτριες
- Passive flow control
- Computational fluid dynamics (CFD)
- Unmanned aerial vehicles (UAV)
- Small windturbines
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Αεροδιαστημική μηχανική
- Mechanical Engineering
- Engineering and Technology
- Aerospace Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52810