Back to search

Institutes outside Greece

Experimental and analytical investigations of brick masonry under compressive fatigue loading

Abstract

dc:description

About 40% of bridges in European transport network are masonry arch bridges (most built over 100 years ago) and are being subjected to increasing loading regimes. Assessment ofthe long-term fatigue capacity of masonry bridges is necessary to ensure that increased traffic loading does not result in premature deterioration and/or reduce their lifeexpectancy. The study investigates the influence of compressive fatigue loading on the behaviour and mechanical properties of low-strength brick masonry, relevant to thestructural loadbearing elements, for example the arch ring in canal masonry bridges.Masonry prisms were tested (n=70) under quasi-static and long-term fatigue loading to collect information on the number of loading cycles under a range of stress levels, changesin the stress-strain curves, evolution of strain and Young’s modulus during fatigue deterioration. Laboratory tests were performed under maximum stress levels between 55–80% of the compressive strength, at 2Hz frequency for a maximum of 10.000.000 loading cycles. Test data were analysed to develop analytical expressions to predict the response ofmasonry under fatigue loading. Test results reveal that fatigue deterioration is characterised by three distinct stages in strain evolution and stress-strain curves. TheYoung’s modulus decreased by 25%, while the maximum recorded strain increased up to 5.25 times. An expression for the stress - number of cycles - probability (S-N-P) curves wasproposed based on probabilistic analysis to predict the fatigue life of masonry at any desired probability. A set of three formulas were developed to predict strain evolution at different stages of fatigue life and a linear equation was derived for the evolution of the Young’s modulus. The proposed S-N-P model can provide numerical data for fatigue analysis of low-strength masonry arch bridges, e.g. for the SMART method to evaluate the remaining service under any traffic loading level. The rate of change in strain can provide useful reference data for long-term monitoring to identify the stage of the fatigue life the structure is experiencing. A reduction factor for the Young’s modulus between 0.9–0.75, depending on the stress level, can be used for assessing masonry arch bridges under fatigue loading. As a consequence, it is recommended that the models describing changes of the mechanical properties of masonry with loading cycles can be adapted by finite element software packages to develop time-dependant models for the analysis of masonry under fatigue.

Degree

thesis:*
Grantor dc:publisher
Institutes outside Greece
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Koltsida, Spyridoula-Iris
  • Κολτσίδα, Σπυριδούλα-Ίρις

Subjects

dc:subject × 19

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/52908

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Koltsida, Spyridoula-Iris; Κολτσίδα, Σπυριδούλα-Ίρις. Experimental and analytical investigations of brick masonry under compressive fatigue loading. Institutes outside Greece, 2017. http://hdl.handle.net/10442/hedi/52908