University of Patras
Αρχιτεκτονικές και αλγόριθμοι επικοινωνιών για οπτικές διασυνδέσεις
Abstract
dc:descriptionThe ever-increasing traffic load in data centers (DC-Data Centers) and high-performance computing systems (HPC-High Performance Computing) pushes electronic interconnection technologies to their limits. As the need for higher transmission speeds increases, electronic interconnections cannot keep up due to wiring density, high power consumption, and crosstalk. On the other hand, optical technologies offer greater bandwidth with lower energy consumption. These reasons lead to the replacement of copper links in an "from-outside-to-inside" way: optical fibers have already replaced copper in long-distance telecommunications networks and are penetrating ever shorter distances in local networks (<= 100 meters). Today active optical cables (AOC-Active Optical Cables) are used for communication between racks in data centers and in high-performance computing systems. However, the bandwidth requirements and power consumption of data networks are still important issues. To meet bandwidth needs and achieve greater energy savings, optical technology will be used over even shorter distances: at the board-to-board, on-board and even on-chip interface levels. This development brings an entirely new technology to the network building blocks for short-range communication. In order to fully exploit the potential of these new building blocks, next-generation architectures for the interconnection network of data centers and high-performance computing systems must be carefully designed for all levels of these system hierarchies. In this direction, this thesis aims to design architectures and algorithms that take advantage of these new structural elements. We proposed strategies for layouts of topologies for optical circuit boards and presented a methodology for designing network topologies using as inputs parameters related to both the physical characteristics of optical devices and parameters related to the performance of network topologies. The proposed design methodology was implemented in an automatic topology design tool which we used to we propose network architectures but also to study the impact on the generated topologies of the technical characteristics of the optical interconnection devices. We then proposed layout strategies for multipoint topologies such as buses and Mesh of Buses topologies. We have provided mathematical formulas for throughput and average distance for both MB-Mesh of Buses and MFCN-Mesh of Fully Connected Networks topologies. Based on the above, we proposed reconfigurable mesh-type architectures for optical circuit boards. Then we studied different grids for designing topologies (for optical circuit boards). Based on these, we proposed mesh topologies for the various design grids we studied. We proposed and studied new highly connected logical topologies and listed their relevant layouts. Finally, we examined and studied the performance of architectural electro-optical switches that combine spatial switching with wavelength multiplexing to achieve a large number of ports with few switching stages and low signal losses, and we proposed scheduling algorithms for switches of this kind.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Siokis, Apostolos
- Σιώκης, Απόστολος
Subjects
dc:subject × 13- Οπτικές δισυνδέσεις
- Δίκτυα υπολογιστών
- Αλγόριθμοι Επικοινωνιών
- Optical interconnects
- Optical printed circuit boards
- On-board topology lay-out
- Communication Algorithms
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική και συστήματα επικοινωνιών, Τηλεπικοινωνίες
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Communication engineering and systems, Telecommunications
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52938