Institutes outside Greece
Physical and numerical modelling of shear behaviour of saw-toothed filled rock joint
Abstract
dc:descriptionLarge-scale geotechnical problems can be approached efficiently using numerical methods of analysis that have been developed during the last three decades, offering many benefits such as speed and accuracy of prediction. The fundamental scope of this doctoral thesis is the creation of a physical and numerical model to investigate the shear behaviour of the filled saw-toothed rock discontinuities using experimental results as input data. An artificial saw-toothed rock joint based on a cement-sand mixture was developed and several laboratory tests were initially performed to assess its physical and mechanical properties. Fine uniform river sand, whose properties were determined through several laboratory tests, was used as infill material. A series of direct shear tests were carried out in the laboratory using relatively large specimens (400 mm length) of the artificial saw-toothed, sand-filled rock discontinuities. Laboratory tests were performed in order to use their results as input data for the building of the numerical model and secondly for the verification of the numerical model. Hence, the shear behaviour of large filled rock joint specimens was examined experimentally and numerically.The distinct element method (DEM) was used through a commercially available computer programme (UDEC), to numerically simulate the direct shear test of a filled saw-toothed rock joint. The model was built using experimental results as input data. The suitability of the program was tested by comparing the computational results with the further respective results from the laboratory. A parametric study was also performed in UDEC, examining, the effect of seven parameters (type and thickness of infill, shear velocity slope asperity, applied normal stress, joint models and block discretisation) on the shear behaviour of a filled saw-toothed rock joint, utilizing the results of 140 simulations. This research has investigated the shear behaviour of a saw-toothed filled rock joint by simulating the shearing mechanism, both experimentally and numerically in UDEC using the DEM, to provide a useful model for further examination of infilled rock joints
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vosniakos, Konstantinos
- Βοσνιάκος, Κωνσταντίνος
Subjects
dc:subject × 12- Γεωτεχνική μηχανική
- Βραχομηχανική
- Geotechnical parameters
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολιτική μηχανική
- Περιβαλλοντική Μηχανική
- Γεωτεχνική μηχανική και Γεωλογική μηχανική
- Civil Engineering
- Engineering and Technology
- Environmental Engineering
- Geotechnical Engineering and Engineering Geology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/52942