Back to search

University of the Aegean

Composite nano-reinforced lime-based binders with piezoresistive properties for restoration applications

Abstract

dc:description

Structural integrity and safety are among the most important criteria dictating the design of interventions and the selection of restoration materials for Cultural Heritage Monuments. After the interventions, continuous structural health monitoring of the restored structures is of crucial importance. In this direction, the classic approach is based on the use of suitable sensors, properly attached to strategic points of the restored structural elements. Analternative approach is the exploitation of restoration materials which exhibit piezoresistive characteristics In this context, the target of the present thesis is the incorporation of carbon-based nanomaterials into restoration materials to produce composite materials with piezoresistive properties. Lime-based binders have been extensively used for restoration interventions and have successfully addressed different performance and compatibility requirements. Lime (aerial or hydraulic) is commonly used in combination with pozzolanic admixtures or cement, to comply with both chemical/mineralogical and mechanical compatibility criteria. The first step of the present research is the production of binder matrices with tailored mechanical properties according to compatibility criteria. Mechanical properties of several lime/metakaolin binders and lime/ cement binders were collected from the literature to establish approximations correlating the binder composition to the mechanical response. The proposed approximationscan be used as guidelines for facilitating the design of conservation binders based on mechanical compatibility and binder composition parameters according to the requirements of the individual project. It must be noted that the composition of the restoration binder depends strongly on the requirements of each specific restoration project. Nevertheless, regardless of the binder composition, the restoration materials do not possess sensing properties that would allow on-site monitoring of micro-cracking or any other form of damage. To this end, the pro- duction of a composite material possessing self-sensing properties is a necessity and it is worth investigating the proper additional material that must be added in the binder matrix. Carbon-based nanomaterials can be considered as candidates to address this issue, as they possess advanced electrical properties. Possibly the best strategy to incorporate the CBNs into the binder matrix is the prior (appropriate) dispersion of the nanomaterials in the mixing water with cement. This task has been challenging to overcome so far, not only in the case of cement-based composites but also in all CBN applications, since the nanoparticles tend to agglomerate in solutions. Ultrasonication is by far the most preferred method to enhance dispersion, while chemical functionalisation is another way to prevent agglomeration phenomena. The next step of the present research focuses on the investigation of aqueous dispersions of carbon-based nanomaterials as the first step to produce nanocomposites. Five different modified nanostructures are studied, including three modified graphene structures (Graphene Oxide, Reduced Graphene Oxide, Carboxylated Graphene) and two modified carbon nanotubes (Carboxylated Nanotubes, Sulfonated Nanotubes). The target is to establish a protocol for quick evaluation and quantification of the dispersions is proposed. The dispersions are studies via electrical impedance spectroscopy (EIS) with an impedance sensor. The novelty lies on the exploitation of a small sensor for on-site (field) direct dielectric measurements with the application of alternating current. The results showed that low concentrations of nanostructures lead to high impedance values due to low-formed current network. Two opposing mechanisms were revealed during the accumulation of ultrasonic energy, which are taking place simultaneously: breakage of the agglomerates that facilitates the flow of the electric current due to the formation of a better dispersed network; nevertheless the surface hydrophilic structure is damaged by the high accumulated ultrasonic energy. An intermediate concentration of nanostructures is suggested (about 0.15 wt% of the binder materials) as appropriate for the specific application, ultrasonicated at approximately 30 to 65 kJ. The investigated methodology is highly novel and displays a high potential to be applied in-field applications where CBNs must be incorporated in building materials. After determining the appropriate combination of concentration and ultrasonic energy, the five nanostructures are incorporated in two different lime-based pastes, aiming at developing self-sensing binders that would be used for restoration applications. The first one consists of Natural Hydraulic Lime - Metakaolin (pozzolanic material), while the second one consists of Lime-Metakaolin-Cement. The mechanical and electrical properties of the newly-developed nano-composite pastes were examined and compared against the respective properties of a reference paste. The results showed that the incorporation of all types of nanomaterials leads to significant advancement of the electrical properties. The highest piezoresistive response was noted for the incorporation of carboxylated graphene in the lime-pozzolan-cement pastes led to 70% fractional change in electrical resistance was noticed under cyclic loading – unloading at a level of 50 % of the compressive strength. The sustainability of the the production of carbon-nanostructures was also examined. Aspects like manufacturing cost, environmental impact and mechanical properties were investigated to select a sustainable carbon nanostructure to reinforce lime-based mortars under different, multi-decision criteria. A quantitative cost assessment methodology was adopted for the five processes of surface modification of carbon nanostructures in laboratory-scale and the results were interpreted against the respective enhancement on the mechanical properties.

Degree

thesis:*
Grantor dc:publisher
University of the Aegean
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Dimou, Angeliki-Eirini
  • Δήμου, Αγγελική-Ειρήνη

Subjects

dc:subject × 15

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/53017

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dimou, Angeliki-Eirini; Δήμου, Αγγελική-Ειρήνη. Composite nano-reinforced lime-based binders with piezoresistive properties for restoration applications. University of the Aegean, 2022. http://hdl.handle.net/10442/hedi/53017