University of Patras
Μελέτη και βελτιστοποίηση λειτουργικών διεπιφανειών σε φωτοβολταϊκές διατάξεις υβριδικών αλογονούχων περοβσκιτών
Abstract
dc:descriptionThis doctoral dissertation presents the study of the development and characterization of solar energy conversion devices (photovoltaic devices), by incorporating advanced, non-toxic materials of high stability, easy preparation and low cost, at the interface of the electron transport film and the absorber. In more detail, the research focuses on the fabrication of 3rd generation solar cells and specifically on perovskite solar cells, where the absorber is methylammonium lead triiodide (CH3NH3PbI3), which follows the general chemical formula ABX3, while the construction of the photovoltaic devices is based on the conventional structure of the n-i-p form. The basic structure of perovskite solar cells (PSCs) is layered type and the main parts of a PSC that affect its photovoltaic behavior and stability are: (a) the electron transport layer and its interface with the absorber, (b) the perovskite layer and (c) the hole transport layer and its interface with the perovskite. The working mechanism of a perovskite solar cell consists of the following basic steps. Incident photons are absorbed by the perovskite layer creating excitons (electron-hole pairs) which diffuse throughout the perovskite. A part of these is recombined while the remaining electrons are injected to the photoanode and then transferred to the external circuit, while the holes are transferred to the hole transport material. Non-radiative recombination of charge carriers, mismatch of energy levels of the materials and optical losses at the interfaces make the operation of PSCs moderate, compared to the theoretical possible efficiency, and their confrontation is necessary in order to improve the efficiency and stability. The surface of the electron transport layer has an additional importance as it is the substrate on which the perovskite crystals grow in the n-i-p structure and, therefore, its properties influence their formation. This thesis focused on improving the interface contact of the electron transport layer (ETL) with the perovskite layer in order to limit, or even completely address, the phenomena that limit the optimal operation and reduce the lifetime of perovskite photovoltaic devices. For this purpose, materials with different physical and chemical qualities were chosen to modify ETL’s surface. The common characteristics of these materials are the low cost, the ease of fabrication without the consumption of large amounts of energy, they are friendly to the environment and present high physical and chemical stability. Initially, porphyrins were studied, either in combination with a BODIPY molecule or metalated. The study continued using graphitic carbon nitride as a modification of both the mesoporous and compact electron transport layer, and ended with the incorporation of a metal chloride into planar structure perovskite solar cells. Each modification was studied in terms of its effect on the properties of the electron transport layer and the perovskite, but also on the photovoltaic behavior of the resulting solar cells and their stability. Through various characterization methods the layers and solar cells were evaluated in terms of morphology, crystallinity, energy bands, dynamics of charge carriers, photovoltaic efficiency and operational stability, and conclusions were drawn about the effect of each material on the PSCs.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gkini, Konstantina
- Γκίνη, Κωνσταντίνα
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/53201