Institutes outside Greece
Cold atmospheric plasma for disinfection of food-processing equipment
Abstract
dc:descriptionMicrobial contamination of foods from contaminated processing surfaces and equipment inside food processing facilities is a major challenge, which threatens the health of consumers and hinders global food production. For this reason, the food industry directs considerable effort and resources to sanitise processing surfaces and equipment, typically relying on thermal techniques and/or chemicals. Unfortunately, these processes often fail to remove persistent microorganisms, while their application typically require frequent downtime in production, resulting in additional financial loses. Given these challenges, food manufacturers constantly seek novel antimicrobial methods that offer advantages over the established practices.Among the emerging antimicrobial methods, Cold Atmospheric Plasma (CAP) generated in atmospheric air stands out as a formidable non-thermal antimicrobial technique. Previous studies during the last decade have shown that the various reactive chemical species (e.g. hydroxyl radical, atomic oxygen, singlet oxygen, hydrogen peroxide, ozone, nitric oxide, atomic nitrogen, peroxynitrite etc.) and UV photons generated from CAP possess antimicrobial properties and act in synergy to eradicate microorganisms. From an industrial perspective, CAP offers effective microbial inactivation at short treatment times against various foodborne pathogens, it can be applied to a wide range of surfaces, it is simple, flexible and low-cost, with low energy demands and does not produce waste or chemical residues.Despite its great potential, there are numerous challenges associated with CAP decontamination technology; most notably the complexity of the reactive chemistry produced which is difficult to control, meaning antimicrobial efficiency varies greatly with small changes in operating parameters. As a result, the uptake of the technology from the food industry has been minimal, with very limited applications on common industrial food processing equipment, or none at all.This project aimed to investigate the feasibility of using CAP as an antimicrobial process for common processing equipment (e.g. conveyor belts) under realistic conditions of food processing facilities; develop a prototype system that will run in parallel with the production line and negate the need for production downtimes; and examine potential effects of the CAP treatment on both the exposed microorganisms and underlying surfaces.Two CAP systems (Indirect and Direct) were evaluated for their antimicrobial effects against two common foodborne pathogens (S.Typhimurium and L.monocytogenes), on stainless steel surfaces, under realistic conditions found within food processing facilities. The Indirect CAP system was investigated due to its simplicity and scalability. The system could achieve considerable levels of microbial inactivation when it was located within 10 mm of the target surface (up to ~2.0 and >3.5 logCFU reduction of S.Typhimurium and L.monocytogenes respectively at 5 mm within ~3 min); suggesting that intermediate-lived chemical species (e.g. hydroxyl radical and nitric oxide) hold a key role in inactivation. However, other factors were found to affect inactivation (e.g. the population density of the microorganisms). Moreover, the effects of CAP treatment on the microorganisms were examined and it was found that CAP caused severe deformations of the exposed cells. Critically though, the required treatment times were found too long for implementation in a continuous in-line system.As such, focus was turned to the Direct CAP system, which in contrast was found to produce encouraging inactivation results within very short treatments down to some seconds (up to ~1.2 and 2.0 logCFU reductions for S.Typhimurium and L.monocytogenes respectively within 10 sec). To that end, this system was chosen for integrating in a prototype Conveyor CAP system and examined as a continuous in-line decontamination process. The sample surfaces were dragged by the belt of the system and treated multiple times. The system produced significant inactivation results as well (up to ~2.8 and 3.0 logCFU reductions for S.Typhimurium and L.monocytogenes respectively on stainless steel for a 10 sec total treatment). Additionally, it was found that the produced inactivation was not affected by the movement of the belt; however, other parameters were found to affect the level of inactivation. The system was further examined on polymeric surfaces, typically implemented in food processing equipment, and it was found to produce similar inactivation results. Finally, the impact of CAP treatment on the exposed surfaces was examined using a variety of surface analysis tools and it was found that CAP exposure caused slight oxidation on both polymeric and metallic surfaces, impacting both their composition and morphology.In summary, this project has demonstrated that CAP can be an effective means of contamination control inside a food processing facility; it can be readily applied to food processing surfaces and equipment as a continuous in-line decontamination process, meeting the requirements of the food industry both in terms of disinfection level, treatment duration and potentially cost.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Katsigiannis, Andreas
- Κατσιγιάννης, Ανδρέας
Subjects
dc:subject × 26- Ψυχρό ατμοσφαιρικό πλάσμα
- Βιομηχανία τροφίμων και ποτών
- Βιομηχανικός εξοπλισμος
- Λιστέρια
- Σαλμονέλλα
- Ανοξείδωτο ατσάλι
- Πολυμερή
- Εκκένωση διηλεκτρικού φράγματος
- Cold Atmospheric Plasma
- Food industry
- Food Processing equipment
- Listeria monocytogenes
- Salmonella Typhimurium
- Stainless steel
- Polymer
- Dielectric barrier discharge
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Επιστήμη και Τεχνολογία τροφίμων
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
- Other Engineering and Technologies
- Food Science and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/53226