Democritus University of Thrace (DUTH)
Ολοκληρωμένο σύστημα παραγωγής ηλεκτρικής ενέργειας για εξηλεκτρισμένα μέσα μεταφοράς
Abstract
dc:descriptionThe electrification of the public transportation sector can be rapidly accelerated thanks to the recent advancements regarding onboard electrical energy production and distribution systems (i.e., the vehicles’ electrical microgrids), which incorporate improved features and capabilities; these microgrids are increasingly similar to those of the corresponding terrestrial electrical power systems (in terms of the structure and the units that they include). Under this light, the modern electrified transport means have to incorporate various energy saving methods, storage units and appropriate energy management systems/control schemes to ensure high performance and reliability.The issue addressed by the present PhD thesis is the optimal design of power electronic devices and the development of appropriate structures/circuitries for the production/recovery and management of the electrical energy in the electrified public transport means. Specifically, the study focuses on the integration of performance-enhanced topologies utilizing flexible energy storage units with fast dynamic response capability, which are connected to the vehicle’s microgrid via innovative power electronics and improved control schemes. These units are able to provide ancillary services, such as supporting the vehicle's microgrid in case of faults (i.e., providing fault ride through capability, FRTC) and/or serving the system's electrical energy needs during transient operating states, compensating for power peaks and voltage sags that may occur in the vehicle's microgrid ensuring so the safe and efficient operation of the electrified public transport means.In this context, the current technological level regarding energy-saving schemes in ground-based all electric transport means was initially investigated. As regards the ground public transport means, the study focused on the energy recovery/saving potential of the Athens-Piraeus trolleybuses, via making use of the energy that is produced by the vehicle's electric propulsion system during deceleration or downslope movement. In light of this, an improved scheme (without the use of position/speed sensors) concerning the application of regenerative braking on the three-phase asynchronous (induction) electric machines that is used by the Athens-Piraeus trolleybuses was studied (via the developed simulation models) and proposed to be incorporated in the trolleybuses’ drive unit. Although a significant margin of electrical energy savings was found during the operation of the trolleybus (up to 24% of the total daily energy consumption), the electrical supply network of the specific vehicles does not support energy recovery (due to the installed electrical equipment that forces the unidirectional energy flow, from the overhead supply network to the trolley). For this reason, the integration of a hybrid bidirectional energy flow system was proposed, which is capable of storing and recharging the recovered energy; the key feature of the proposed system is the flexibility of integrating electrical equipment (supercapacitors and batteries’ units, with suitable operating characteristics – e.g., capacity, discharge time) that supports the development of advanced control strategies for the optimal energy management in the vehicles under study.The basic study of the present PhD thesis concerns the issue of the optimal design of the energy production systems in the modern microgrids of the more electric aircrafts (MEAs). In this context, a literature review of both the conventional and the advanced state-of-the-art systems regarding the production of electrical energy in MEAs was carried out, with the aim of highlighting the optimal topologies; in more detail, the study focused on the electrical generator units that are currently proposed and/or used along with the power electronics-based machines’ drives and emphasized the advanced power generation schemes that are proposed for the MEA's high voltage dc microgrids (± 270 V, 540 V), including the switched reluctance machine (SRM); the latter is one of the predominant electrical machines candidates to be incorporated in the high-power systems of MEAs, and especially for the starter/generator (S/G) function. In light of this, the present PhD thesis focused on the current state of the art SRM topologies and control schemes for power generation in MEA microgrids, highlighting the capabilities and perspectives of these systems. The thorough literature research and in-depth study of the SRM drives’ special characteristics/potential led to the invention/development of an integrated prototype of a dynamic power generation system in the MEA high voltage dc microgrid (± 270 V, 540 V), which includes the system of the electrical machine (i.e., the SRM) and its control unit (power electronic converter topology). The special feature of the proposed control scheme lies in the integration of an active series filter (SAF) in the SRM’s drive unit, in order to directly regulate the generated power of the machine. The study is based on the mathematical modeling of the proposed system as well as on simulations with an appropriate software package (MATLAB/Simulink). The advantages of the proposed SRM’s generated power control method over the existing/representative control schemes that can be found in the relative (international) literature (regarding high power and high speed applications of the electric power generation systems in the MEAs), lies in the enhanced operation of the drive under continuous variable/multiple operating points, inherent fault ride through capability (FRTC), low control complexity and high reliability of the electrical equipment of the proposed topology.The next step of the study was the development of an integrated SRM S/G drive system (using the proposed active series filter), which constitutes a critical application of MEA power generation systems. In this context, a novel control algorithm is properly designed and proposed to drive the electrical machine initially as a motor (to start the main internal combustion engine of the aircraft) and then as a generator (to generate power to the MEAs dc microgrid). At the same time, a suitable energy storage unit was proposed to be integrated in the SRM’s topology, in order to achieve both the reliable start-up of the machine and the optimal exploitation of the generated power, under different operating conditions, according to the specifications of the modern MEA microgrids. The proposed control scheme facilitates both the two distinct modes of the electrical machine (i.e., motor and generator), as well as the smooth transition from one mode to the other (from motor to generator and vice versa). The latter feature is of paramount importance for the operation of the aircraft, as it enables the main internal combustion engine (i.e., the gas turbine) to be restarted in flight (e.g., in the case of an on-flight failure). Moreover, the proposed energy storage unit provides an additional degree of freedom regarding the design of the parameters of the SRM’s drive unit.It is worth noting that the developed mathematical models are confirmed through control tests using a real-time digital simulator (RTDS) and an external digital signal processor (DSP) microcontroller. Specifically, the power stage of the drive unit (i.e., the SRM and the power electronic converters) are simulated on the real-time digital simulator platform (MicroLabBox 1202, dSPACE) while the control stage (i.e., the developed algorithm/control scheme) is implemented on the external microcontroller (dsPIC30F4011, Microchip). The communication between the two systems is achieved through analog and digital signals. This method (control hardware-in-the-loop, CHIL) was implemented by making use of the existing equipment of the Electrical Machines Laboratory of the Department of Electrical and Computer Engineering of the Democritus University of Thrace. The results of the simulations in the MATLAB/Simulink environment as well as the real-time tests confirmed that the proposed method of the direct control/management of the SRM’s generated power can enhance the performance and reduce the computational load, contributing so to the high reliability of the SRM’s drive unit and thus to the wide adoption of the specific electric machine as a S/G in MEAs.In addition, within the framework of this PhD thesis, a converter topology which facilitates the interconnection of energy production/storage units in a dc bus and/or the interconnection of dc buses of different voltage levels (application in dc microgrids) under a high voltage conversion ratio, was also developed. The proposed topology consists of a switched capacitor-type dc/dc multilevel converter (without an isolation transformer) combined with a bidirectional step-up/down converter (connected to the input of the multilevel converter). The main advantage of the developed topology is its enhanced FRTC, thanks to the series connection of the dc/dc converter with the microgrid in which it is integrated (preserving this advantageous feature of the topology that has been developed for the SRM’s drive unit); the latter is an important requirement in modern microgrids of the electrified transport means (especially as regards the critical loads of the vehicle). The theoretical analysis of the topology was confirmed through simulations and real-time testing (CHIL).
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Apostolidou, Parthena
- Αποστολίδου, Παρθένα
Subjects
dc:subject × 17- Ενεργό φίλτρο σειράς
- Εξηλεκτρισμένα αεροσκάφη νέου τύπου
- Ικανότητα αδιάλειπτης λειτουργίας υπό παροδικά σφάλματα
- Μηχανή μαγνητικής αντίστασης διακοπτικής διέγερσης
- Μικροδίκτυα συνεχούς τάσης
- DC microgrids
- electrical energy production in public transport means
- Fault Ride Through Capability
- more electric aircraft
- series active filter
- Switched Reluctance Machines (SRMs)
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Αυτοματισμοί και Συστήματα ελέγχου
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Automation and control systems
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/53266