Back to search

Aristotle University Of Thessaloniki (AUTH)

Μελέτη και προσομοίωση των ηλεκτρικών χαρακτηριστικών οργανικών τρανζίστορ

Abstract

dc:description

The aim of the present dissertation is the fabrication and study of high performance flexible organic transistors (OFETs) based on the large-area deposition with a moderate speed processing (1 m/min) of the Poly(4-vinyl-phenol) (PVP) polymer dielectric layer with a slot-die method mimicking the Roll-to-Roll (R2R) coating conditions. This is the highest processing speed reported so far in the literature and the combined benefits of this method brings the OFETs closer to their R2R manufacturing. Evaluation of the quality and the thickness homogeneity of the cPVP dielectric layer was necessary to conclude that cPVP is able to be utilized as the dielectric layer of the OFETs. The 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS-PEN) was used as the organic semiconductor and the morphological and structural characteristics of the spray deposited TIPS-PEN films were investigated. The bottom-gate top-contact (BG-TC) flexible OFETs exhibited an excellent electrical behavior with a maximum mobility value equal to 0.21 cm2/Vs. Furthermore, the BG-TC flexible OFETs based on the spray deposited blends of TIPS-PEN with the polystyrene (PS) insulating polymer (0.8:0.2 w/w) were fabricated. The morphological and structural comparison of the TIPS-PEN films and the TIPS-PEN:PS films was followed by a comparative study of the IDS-VGS and IDS-VDS characteristics of the TIPS-PEN OFETs and the TIPS-PEN:PS OFETs. The comparison demonstrated that the electrical behavior of the TIPS-PEN:PS OFETs was substantially improved. Subsequently, the present thesis was targeting to the large area deposition of the TIPS-PEN layer with a method mimicking the blade-coating conditions over the cPVP layer towards the fabrication and study of high performance flexible OFETs. It is an innovative study that will bring the OFETs closer to be fully printed over a large area, which is necessary for their future commercialization. In this study, the deposition parameters namely the speed and the temperature were investigated, in order to obtain high quality coating and optimized crystalline characteristics of the “blade-coated” TIPS-PEN films. The BG-TC flexible OFETs based on the optimized TIPS-PEN films exhibited a maximum mobility value equal to 0.12 cm2/Vs. In the present thesis, TCAD tools (Silvaco-suite) were used to simulate the experimental OFET devices with a BG-TC structure which are based on the spray deposited TIPS-PEN:PS (0.8:0.2 w/w) blends. It is the first time that TCAD tools are applied to simulate the OFETs that have been developed by a large scale compatible method and it is of a particular challenge. The BG-TC OFET device structure was initially specified in DevEdit tool. In the simulation study, the physical quantities including the shallow donor-type bulk and interface traps, the negative interface charge density and the contact barriers were taken into account. Moreover, appropriate physical models (constant low-field mobility model and band-to-band tunneling model) were selected. The simulated and the experimental IDS-VGS characteristics converged very well, however, there was a noticeable discrepancy between the simulated and the experimental IDS-VDS characteristic at higher gate voltages (- 40 V). The simulation of the same channel length experimental OFETs exhibiting mobilities varying from 0.44-0.89 cm2/Vs, demanded also an individual set of new parameters for each experimental OFET device due to the inherent variability. In order to obtain more realistic simulations, another important physical quantity, such as the RMS (root mean square) roughness at the active interface, was also included in our simulation study. As a consequence, the simulated IDS-VGS and IDS-VDS characteristics were significantly improved (better convergence), particularly, the simulated IDS-VDS characteristic at VGS = - 40 V exhibited the most important improvement. Different roughnesses and patterns at the active interface were studied. The TIPS-PEN thickness non-uniformity was introduced in our simulation study, subsequently. The non-uniformity resulted in a significant degradation of the drain current (IDS) when the channel local thickness is smaller near the drain electrode. The simulated devices with roughness at the active interface in combination to the TIPS-PEN thickness non-uniformity resulted in a severe degradation of the IDS current similar to that of the experimental devices. The introduction of the roughness at the active interface as well as of the non-uniformity of the channel thickness, constitute an innovative part in our simulation study and they could interpret the variability in mobility which is observed in the experimental OFET devices despite they have the same channel length and width. This approach will be used as additional tool in devices exhibiting substantial interface roughness and thickness inhomogeneity.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kaimakamis, Tryfon
  • Καϊμακάμης, Τρύφων

Subjects

dc:subject × 30

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/53448

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kaimakamis, Tryfon; Καϊμακάμης, Τρύφων. Μελέτη και προσομοίωση των ηλεκτρικών χαρακτηριστικών οργανικών τρανζίστορ. Aristotle University Of Thessaloniki (AUTH), 2023. http://hdl.handle.net/10442/hedi/53448