Back to search

University of Patras

Ανάπτυξη καταλυτών για την παραγωγή πράσινου ντίζελ από απόβλητες λιπαρές ύλες

Abstract

dc:description

The term energy crisis refers to a situation in which the demand for energy exceeds the supply of available resources. This can occur due to various factors, such as overpopulation, industrialization, and the depletion of fossil fuel reserves. The energy crisis has important consequences for the economy and the environment. The use of fossil fuels contributes significantly to air pollution and greenhouse gas emissions. To deal with this crisis, a transition to sustainable and renewable energy sources, such as biofuels, is necessary. In recent years, efforts have been made to gradually replace conventional diesel with the so-called renewable (green) diesel. For producing green diesel, natural triglycerides contained in biomass are converted, through a catalytic process, into hydrocarbons. Initially, catalysts containing noble metals and conventional metal sulfide catalysts from the oil industry were studied for this process. The high cost of the noble metals and the presence of sulfur, which can contaminate the final product, turned the research interest to the cheaper but efficient catalysts that contain transition metals. In this context, the present research is concerned with the development of nickel-alumina and cobalt-alumina catalysts. Towards this end, various methods of preparation were studied and detailed physicochemical characterization took place. The catalytic evaluation was carried out for the conversion of fatty matter to renewable diesel.This thesis contains seven chapters. The first chapter is the Introduction, which provides an overview of the field and sets out the objectives of the thesis. The second chapter contains the experimental procedures. The experimental procedure starts with the physicochemical characterization of the raw materials, the sunflower oil (SO) and the cooking oil (WCO) through the determination of moisture content, iodine number, acidity, viscosity and saponification number. The above were also analyzed by gas chromatography and thermogravimetric analysis (TGA). Infrared spectra were obtained by total reflectance spectroscopy. The catalysts of the present study were subjected to detailed characterization by a variety of techniques. More specifically, techniques such as N2 adsorption-desorption, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM), Thermoprogrammed Hydrogen Reduction (H2-TPR), Thermoprogrammed Ammonia (NH3-TPD) and Hydrogen (H2-TPD) Desorption, and pulsed CO chemosorption were used. The catalytic behaviour of all catalysts was evaluated in a semi-batch reactor. The liquid products were analyzed using Gas Chromatography, standard solutions and Mass Spectrometry. The extent of carbon deposition on the used catalysts was determined by Thermogravimetric Analysis (TGA) and Total Carbon (TC) analysis.The third chapter deals with the study of two nickel-alumina catalysts with 60 wt% Ni, prepared by the wet impregnation and the co-precipitation techniques. The purpose of the study is to investigate the effect of the preparation method and activation temperature on the catalytic conversion of natural triglycerides to renewable diesel, and the effect of reaction conditions on the performance of the most active catalyst. The catalyst prepared by co-precipitation has a larger specific surface area, smaller mean Ni crystal size and consequently a larger metallic surface area, that justify its higher performance. With the increase the activation temperature, the size of the nickel nanoparticles increases, through sintering, destroying the small pores. These lead to a decrease in the specific surface area and active surface area of Ni and hence to the decrease in catalytic efficiency. Optimization of the reaction conditions using the more active catalyst (prepared by co-precipitation and activated at 400 °C) leads to complete conversion to green diesel, not only of the edible sunflower oil (SO), but also of the non-edible waste cooking oil (WCO). The liquid sample, produced after hydrotreating these two feedstocks for 7 hours at 40 bar H2 pressure and 350 °C using 100 mL of feedstock and 1 g of catalyst, consists of 97 and 96% w/w of green diesel, respectively.In chapter four, three nickel-alumina catalysts with 60, 80 and 90 wt% Ni are studied. The catalysts were prepared by the co-precipitation technique. The purpose of this study is to determine the optimum Ni loading for the conversion of waste cooking oil to renewable diesel via the selective deoxygenation (SDO) process. Increasing the nickel content, a change in the porous structure of the final catalyst and a decrease in specific surface area occurs. Correspondingly, the catalytic efficiency increases significantly due to the increase in the population of active sites. The highest catalytic activity is obtained using the catalyst with 80% w/w Ni, due both to its strong acid sites and porous structure, which prevents the introduction into the pores of bulky compounds contained in the waste cooking oil.In chapter five, three cobalt-alumina catalysts, with 35, 55 and 70 wt% Co, prepared by the co-precipitation technique are studied. The aim of this study is to investigate the effect of the Co loading and the activation temperature on the transformation of waste cooking oil (WCO) and sunflower oil (SO) into renewable diesel. The different reduction temperature and Co content caused remarkable changes in the catalytic behavior. The catalyst with 55% w/w Co content, which was activated at 500 °C, proved to be the best. Its high performance was attributed to the high metal surface area, the synergy between Co0/CoO phases, and its relatively moderate and strong surface acidity. The catalysts studied showed relatively lower performance in terms of selective deoxygenation of WCO than sunflower oil (SO). This is attributed to their deactivation due to carbon (coke) deposition in the active sites of the catalyst and the simultaneous blockage of the catalyst pores.In chapter six, the study of biochars derived from residual biomass is described, as supports for Ni catalysts. By-products of agro-industrial activities, namely espresso coffee residues (C), and rice husks (R), were used as raw materials for the preparation of the biochar. Initially, biochars were prepared by pyrolysis under limited oxygen conditions. The resulting biochars were further treated (with hot water, aqueous acid solution, aqueous alkali solution) and characterized by various techniques to determine their morphological and chemical characteristics. Based on these characteristics, some of the above biochars were selected as Ni catalyst (10% w/w) supports, prepared by wet impregnation. The resulting catalysts were evaluated in a semi-batch reactor for the transformation of waste cooking oil (WCO) into renewable diesel. The catalyst named 10Ni_BioC-P, with 10 wt. % Ni supported on a biochar derived from espresso coffee residue and treated with hot H3PO4 2M solution, showed complete conversion of the initial waste cooking oil, but low hydrocarbon yield (7.5%). In order to improve the performance of this catalyst, an attempt was made to increase the wt. nickel content to 30% which did not give positive results. In a second improvement attempt, the 10Ni_BioC-P catalyst was modified with a small amount of molybdenum [atomic ratio Ni/(Ni+Mo) =0.9]. This modification resulted in more than doubling the renewable diesel yield compared to the unmodified catalyst.The seventh chapter summarizes the general conclusions of the thesis and makes suggestions for further study.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Nikolopoulos, Ioannis
  • Νικολόπουλος, Ιωάννης

Subjects

dc:subject × 34

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/53539

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Nikolopoulos, Ioannis; Νικολόπουλος, Ιωάννης. Ανάπτυξη καταλυτών για την παραγωγή πράσινου ντίζελ από απόβλητες λιπαρές ύλες. University of Patras, 2023. http://hdl.handle.net/10442/hedi/53539