Back to search

Aristotle University Of Thessaloniki (AUTH)

Ανάπτυξη βελτιωμένων τεχνικών πολυστοιχειακών επικαλύψεων με βάση το βόριο σε μεταλλικά υλικά

Abstract

dc:description

In the present Ph.D. thesis, the industrial process of boronizing has been experimentally investigated. Boronizing is a thermochemical treatment during which boron atoms are initially adsorbed and consequently diffused into the crystal lattice of a metallic substrate, resulting in the formation of a superficial layer made of a chemical compound of boron with the base metal. This layer, which is called boride coating, is the desired product of the process and aims to protect the metallic substrate from wear and corrosion, due to its exceptional physical and chemical properties.The theoretical part of this thesis includes an extended mathematical and chemical approach to all phenomena that take place during the boronizing process, as well as the highlight of the practical parameters that influence the efficiency of the process and the quality of the final product in an experimental or industrial scale. Subsequently, after a detailed description of the boronizing method that was adopted in the context of the present thesis, a theoretical analysis of the ways of process optimization, which were to be applied, was conducted. The common denominator of those improving interventions is the fact that all of them include the addition of another metallic element in the process to improve the quality of the coating or to enhance the effectiveness of the process.The first way of improvement is the conduction of a secondary heat treatment, after the main boronizing treatment, during which metallic chromium was diffused into the already formed boride coating to convert it into a mixed boride – chromium coating and improve its anticorrosion behavior.The second way of improvement that was examined is the addition of a small amount of a rare earth element in the main boronizing process to act catalytically in the kinetics of the process so that, in the same treatment conditions, thicker and more compact coatings to be produced.In the experimental part of this dissertation, the conventional boronizing was investigated and applied to two completely different between them metallic substrates: the low alloy steel AISI 4140 and the recently developed intermetallic titanium-aluminum alloy GE48-2-2. In both cases, a kinetic study was conducted in order the kinetic constants of boron diffusion during the process to be determined. Additionally, an examination of the morphological characteristics, the composition, and the mechanical properties of the coating was carried out via optical and electron microscopy, X-ray diffractometry, and hardness measurements. An issue of special interest was the unprecedented morphological and crystallographic characteristics of the coating formed on the surface of the intermetallic alloy GE48-2-2, as well as the quite low diffusion coefficient of boron in its crystal lattice.In the main part of the thesis, important results emerged from the study of chromium addition in the boride coating (borochromizing). First, it was found that the optimal way of chromium addition was through a subsequent thermochemical chromizing treatment. The evaluation of the anticorrosion behavior of the improved mixed boride – chromium coating was conducted via the Electrochemical Impedance Spectroscopy method. The results showed that the additional chromizing process initially increased the resistance of the coating against corrosion, but after the exposure to a strongly corrosive environment of HCl or H2SO4, this benefit disappeared, and the coating eventually collapsed in electrochemical terms. This study revealed some aspects of the electrochemical behavior of the mixed boride–chromium coatings, which had not been highlighted till now.The investigation of the catalytic boronizing process using the rare earth compounds LaCl3 and CeO2 showed that the addition of a small amount of one of these substances in the boronizing environment can, under certain conditions, improve the efficiency of the process. The maximum benefit was obtained by the addition of 0.5 wt. % LaCl3 or CeO2, which led to the decrease in the activation energy of boron diffusion by 20 % and 39 %, respectively. The phenomenon, however, was not simple at all, as a slightly different quantity of rare earth could have a zero or even negative effect on the efficiency of the process. A theoretical explanation of the observations was attempted by the writer, which includes the involvement of two independent mechanisms of action of rare earths in the boronizing environment.In summarizing, the present Ph.D. thesis about the development of improved techniques for boron-based multielement coatings on metallic materials paid off, because it enriched the experimental data regarding i. the behavior of intermetallic titanium-aluminum alloys in boronizing, ii. the effect of rare earths on the efficiency of the boronizing process and iii. the response of the mixed boride – chromium coatings in corrosion. The international scientific literature regarding all these issues has significant deficiencies and needs enrichment.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Zagkliveris, Dimitrios
  • Ζαγκλιβέρης, Δημήτριος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/53546

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zagkliveris, Dimitrios; Ζαγκλιβέρης, Δημήτριος. Ανάπτυξη βελτιωμένων τεχνικών πολυστοιχειακών επικαλύψεων με βάση το βόριο σε μεταλλικά υλικά. Aristotle University Of Thessaloniki (AUTH), 2023. http://hdl.handle.net/10442/hedi/53546