Back to search

National and Kapodistrian University of Athens

Φωτοευαίσθητα πολυμερικά υλικά μηχανισμού χημικής ενίσχυσης για κατασκευή μικροσυστημάτων

Abstract

dc:description

In 1958 two researchers, Jack Kilby (2000 Nobel Prize in Physics) and Robert Noyce, independently built the first monolithic integrated circuit (I.C.). Since then, the development of I.C. follows Moore's law, i.e. the capacity of the I.C. is doubled approximately every 18 months. This is due to: a) the reduction of the critical dimension of the I.C. structures, which are mostly manufactured by photolithography, b) the diameter increase of silicon wafers on which the I.Cs. are manufactured, and c) the number of flat layers of I.C.s increase. The reduction of the dimensions of the elements of an I.C. is the main objective of the relevant research. In recent years, alongside Microelectronics, the field of Microsystems is also developing rapidly. Many Microsystems are manufactured with techniques similar to those of the I.C.s, such as film shaping techniques and especially lithography. This often requires the improvement of old techniques or the development of new methods and materials. The purpose of this doctoral thesis is to study the possibility of manufacturing microsystems with photolithography using new photopolymeric materials. The materials studied and developed in this study belong to the category of chemically amplified photoresists. These materials present great advantages mainly due to their great photosensitivity and the possibility of adjusting their properties by modifying their components. Chemically reinforced photopolymeric materials contain as basic components polymers, whose solubility with the help of a photoacid generator (production of protonic acid when exposed to a suitable wavelength) changes in specific solvents after their exposure. By modifying the photoacid generator, it is possible to select the desired exposure area. At the same time, the modification of the chemical groups of the polymers provides many possibilities on optimizing the properties of these materials. In this doctoral thesis, two systems of chemically amplified photoresists were studied and optimized for two of the most typical applications found in the area of microsystems, including the area referred to as bio-nanotechnology. In the first case, the problem to be solved is the construction of high aspect ratio structures. Such structures find application in the development of microchannels, microgears, etc. There is currently a photoresist on the market that is used for such applications and is a system of an epoxy polymer and a photoacid generator. This photoresist, however, presents two significant disadvantages: firstly, it cannot be easily removed after exposure to UV radiation, which causes the formation of a polymeric network, and secondly, the developer is an organic solvent (PGMEA) which is not compatible with I.C. industry and additionally, is not environmentally friendly. In this work, the possibility of modifying the photoresist of this category was investigated in order to give: a) structures with high ratio, b) to appear in dilute base solutions (widely used in the I.C. industry) and c) to be easily removed at the end of the process. The proposed approach is the modification of the composition of the material in order to achieve the desired dissolution rate in aqueous medium of the unexposed areas and controlled variation of the solubility of the exposed area. In the second case, the goal was the development of a suitable photoresist, which can be used in combination with a new lithographic method for the development of biomolecules microarray. Biomolecule microarrays have recently found great application in the wider area of bioanalytical devices and especially in immunoanalysis. There are already such microarrays on the market which are manufactured using controlled mechanical deposition methods (I.e. ink jetting, microspotting), but these structures are quite large, e.g. each individual region of biomolecules has dimensions of 100 µm in diameter. The reduction of dimensions in microarrays of biomolecules attracts a lot of interest today and internationally many researchers are dealing with the specific subject while new methods of manufacturing such microarrays continue to be presented. In this work, biomolecules microarrays are developed using appropriately modified chemically amplified photoresists. A new lithographic scheme for the fabrication of these microarrays is introduced, whose lithographic processes should be compatible with biomolecule deposition. In addition, the lithographic properties of the pphotoresists should be suitable to fabricate a dense microarray of different biomolecules with dimensions much smaller than 100 µm (and even smaller than 1 µm). The approach proposed in this research is also based on maximizing the difference in the solubility of the exposed and unexposed area of the lithographic material. Then, the development of microarrays devices will be demonstrated up to the limit allowed by the exposure system used. At the same time, the process will be used for the development of devices with a predetermined geometry such as e.g. electrochemical sensors using the techniques of manufacturing masks and aligning the individual elements of the microarray. It should be noted here that the conditions that a lithographic process must fulfill in order to be compatible with the presence of biomolecules are: a) thermal processes at temperatures lower than 50oC, b) development to a dilute base solution (TMAH) of a concentration lower than 2, 6 x10-3 N and c) exposure to wavelengths greater than 300nm. These requirements significantly limit the possible options for optimizing the material in the direction of planar lithography with high resolution and the possibility of repeated lithographic cycles. In conclusion, the purpose of this doctoral thesis is to appropriately design chemically amplified photoresists for microsystems fabrication via lithography. The successful handling of this design will lead to new applications with the know-how transfer from the area of Microelectronics, and especially from the area of design and development of polymeric materials for lithography, to that of Microsystems. This work, therefore, includes an extensive study of the effect of material parameters and processes on the final lithographic behavior of the photoresist.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2004

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Chatzichristidi, Margarita
  • Χατζηχρηστίδη, Μαργαρίτα

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/53557

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Chatzichristidi, Margarita; Χατζηχρηστίδη, Μαργαρίτα. Φωτοευαίσθητα πολυμερικά υλικά μηχανισμού χημικής ενίσχυσης για κατασκευή μικροσυστημάτων. National and Kapodistrian University of Athens, 2004. http://hdl.handle.net/10442/hedi/53557