Aristotle University Of Thessaloniki (AUTH)
Θερμοχημική ανακύκλωση πολυμερών που προέρχονται από απορρίμματα ηλεκτρικών και ηλεκτρονικών συσκευών
Abstract
dc:descriptionThe amounts of plastics originating from Waste Electric and Electronic Equipment (WEEE) have increased over the last decades, due to the rapid expansion and consumption of electric and electronic devices and their short lifespan. This, necessitates finding and applying environmentally friendly solutions for their handling. One main obstacle when recycling plastics from WEEE is the fact that they are often found as polymer blends and that they usually comprise various harmful additives, such as brominated flame retardants (BFR) that need to be removed before or during their recycling. Among the current recycling methods, chemical recycling (and especially pyrolysis) is more advantageous, since a number of secondary valuable materials can be produced, monomers may be recovered and the liquid fraction can be used as fuel. The aim of this dissertation is to study the thermochemical recycling (pyrolysis) of polymers and polymer blends found in WEEE, focusing on the recovery of valuable pyrolysis products, while overcoming the aforementioned difficulties due to the presence of BFR; by examining environmentally friendly solutions for their removal prior to pyrolysis (via soxhlet extraction and microwave-assisted extraction) or their reduction during pyrolysis using various catalysts. The long-term goal of this dissertation lies on the application of the results obtained on real WEEE, with the aim of reducing the volume of WEEE through an environmentally friendly approach. The most representative polymers found in WEEE, including, acrylonitrile-butadiene-styrene (ABS), high-impact polystyrene (HIPS), polycarbonate (PC) and polypropylene (PP) were selected. Tetrabromobisphenol A (TBBPA), was investigated, since it is the most common BFR used in WEEE. Both polymers and TBBPA were firstly studied separately in order to gain important information. Afterwards, they were used for the preparation of polymer blends (with combinations of ABS/HIPS/PC and ABS/HIPS/PC/PP), in the absence and presence of TBBPA. During the thermal degradation of all blends there were formed various useful compounds, including styrene, other aromatic hydrocarbons (such as alpha-methylstyrene), along with various phenolic compounds. Nevertheless, pyrolysis of blends that comprised TBBPA led to the formation of some brominated compounds, as it was expected. During catalytic pyrolysis of these blends, the catalysts ZSM-5, Al2O3, MgO, Fe/Al2O3 and Fe/MgO, provided by CERTH, were evaluated for the enhancement of the valuable aromatic hydrocarbons and phenolic compounds and for the reduction of the undesirable brominated compounds formed. The results showed that all catalysts promoted the production of phenolic compounds. Among all catalysts tested, the best one was Fe/Al2O3, since it led to larger amounts of phenols. Also, it was found that all catalysts led to bromine reduction; while bigger reduction was received when using: Fe/Al2O3>Fe/MgO>MgO. As a result, Fe/Al2O3 was the most appropriate catalyst not only for increasing the formation of the phenolic compounds but also, for reducing the bromo-compounds formed. Its efficiency was attributed to the presence of Fe particles. In an attempt to scale up the project, thermal and catalytic pyrolysis of the blends were conducted using a bench-scale fixed bed reactor located at CERTH, applying the optimal conditions and using the optimal catalysts (Fe/Al2O3, Fe/MgO and MgO). After each experiment, the liquid, gas and solid fractions were analysed. In all cases tested the liquid fraction prevailed (> 75%); while consisting of aromatic and phenolic compounds. In the presence of the catalysts the aromatic fraction increased; and especially in the presence of Fe/Al2O3. These are in accordance with the observations made during the initial pyrolysis experiments (Py-GC/MS). Apart from the reduction of bromine during catalytic pyrolysis there were also investigated some methods for the removal of bromine prior to pyrolysis. The first method was soxhlet extraction, during which several extraction times (3, 6 and 12 h.) and various solvents (isopropanol, ethanol and butanol) were investigated in order to find the optimal choice that could result in the biggest bromine reduction. As indicated the reduction of bromine was achieved in all cases tested, while the polymers’ structure was maintained. When using butanol, bromine was eliminated, since the reduction reached almost 100%. The latter finding is of great importance, since almost complete removal of bromine occurs, while butanol is an environmentally friendly solvent and its use is of adequate novelty since no data were found in the literature regarding the use of butanol in extracting BFR from WEEE. The second method involves microwave-assisted extraction, as a pretreatment step before pyrolysis, during which less extractive time is needed. Different extractive temperatures (within the range of 160-100°C), times (20, 30 and 40 min) and solvents (isopropanol/hexane, ethanol/hexane, isopropanol/ethanol, isopropanol and ethanol) were investigated in order to find the optimal conditions that could result in the biggest bromine reduction. 100 °C and 30 min were the optimum combination; and were selected for the investigation of the efficiency of the different solvents. As observed, all of them resulted in bromine reduction; but the two polar/non-polar solvents (isopropanol/hexane and ethanol/hexane) led to greater bromine reduction (>73%).Last but not least, emphasis was given on the implementation of the optimal results and methods in plastics from real WEEE. For this reason, 17 plastic materials, including parts from televisions, computers, printers, remote controls and a calculator, were collected. After their collection they were analysed by various techniques (FTIR, DSC, TGA, EGA, Py-GC/MS), in order to obtain important information and identify the polymers present in each device, since they were unknown. XRF analysis was applied to all samples collected in order to identify the possible presence of bromine, in case they were brominated flame retarded. It was found that a large part of the samples (41%) contained bromine. These samples were subjected to soxhlet extraction. Not only the optimal extraction conditions (6 h. soxhlet with butanol and a solid waste/solvent ratio 1/100 as well as the same conditions with isopropanol – the second choice) were investigated, but also the application of different ratios of solid waste/solvent (5/100 and 10/100), with the aim of evaluating the solvents’ efficiency when the waste mass is increased. Results showed that bromine was reduced in all cases tested, reaching up to 35% reduction when using butanol. FTIR and thermal pyrolysis results revealed that most samples (12/17) consisted of HIPS, while the rest of them were blends of PC/ABS or ABS. The chemical recycling of the samples, via pyrolysis, led to monomers (e.g., styrene), or other valuable secondary compounds, including aromatic hydrocarbons or phenols, depending on the type of the polymer present in each sample. Catalytic pyrolysis was also conducted using the optimum catalyst, Fe/Al2O3. Its presence led to an increase in the production of the aforementioned valuable compounds. Pyrolysis results were confirmed during the scale up (when using the bench-scale fixed bed reactor), since it was found that the liquid fraction consisted of valuable products, such as aromatic hydrocarbons or/and phenolic compounds in case of the blends (PC/ABS). To sum up, soxhlet extraction with butanol seems to be a promising method for the extraction of BFR from plastics originating in WEEE; and in the meantime, butanol is a green – environmentally friendly solvent. So, future studies could investigate different extraction conditions, including for instance larger extractive times in the presence of butanol (as the extractive solvent) or the combination of butanol and other non-toxic solvents in order to maximise the debromination efficiency, enabling the subsequent recycling (via pyrolysis) of the pure (bromine free) polymers.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Charitopoulou, Maria-Anna
- Χαριτοπούλου, Μαρία-Άννα
Subjects
dc:subject × 20- ΑΝΑΚΥΚΛΩΣΗ ΠΟΛΥΜΕΡΩΝ
- Πυρόλυση
- ΑΗΗΕ
- Επιβραδυντές καύσης
- Recycling of polymers
- Pyrolysis
- WEEE
- Flame Retardants
- Χημεία
- Φυσικές Επιστήμες
- Επιστήμη πολυμερών
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολυμερή και Πλαστικά
- Chemical Sciences
- Natural Sciences
- Polymer Science
- Materials Engineering
- Engineering and Technology
- Polymers and Plastics
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/53628