National Technical University of Athens (NTUA)
Σχεδιασμός άμεσης υποστήριξης σε θέσεις συμβολής σηράγγων
Abstract
dc:descriptionThis thesis deals with tunnels primary support design issues, emphasizing on tunnel junction areas. The problem is approached through three-dimensional numerical simulation with parametric investigation of in-situ stress and rockmass mechanical properties. The evaluation of the results focuses on support stress resultants and displacements since these are a key tunnel design criterion. Numerical simulations in strong rock masses incorporate an advanced strain – softening constitutive model while in cases of anisotropic rock masses a ubiquitous joints model is introduced. All continuous media numerical analyzes were performed using FLAC3D finite difference code, while for non-continuous media analyzes the 3DEC and RS2 codes were used. The simulation process included axisymmetric, three-dimensional and plane strain analyzes. In all numerical simulations, sequential excavation and support was applied in all stages (top heading, bench – invert) for both main and escape tunnel. According to the findings of the present thesis, after the construction of the escape tunnel the support of the main tunnel is unloaded in the junction area with the crown of the escape tunnel and is overloaded in the junction area with the side wall of the escape tunnel. In the unloading area, the unloading is severe and the development of tensile axial forces after the construction of the escape tunnel is possible. In that area, it is proposed to reinforce the main tunnel lining with the use of steel mesh and/or lattice girders or even a regular reinforcement to avoid tensional cracks in the shotcrete. In contrast, in the overload area the development of axial compressive forces is very intense. In this area it is proposed to increase the thickness of the sprayed concrete or to predict the construction of an elephant foot to avoid the failure of the sprayed concrete in compression. In general, there is no increase in the stress resultants of the escape tunnel in close proximity to the main tunnel. Finally, given the complex geometry of the excavation in the junction area, structurally controlled failure may occur. Hence, additional rock bolts, steel mesh and spilling may be required for failure control and according to rock mass jointing.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gkikas, Vasileios
- Γκίκας, Βασίλειος
Subjects
dc:subject × 23- Μηκοτομικό προφίλ μετακινήσεων
- Βραχομάζα με συμπεριφορά χαλάρωσης
- Αριθμητική προσομοίωση
- Συμβολή σηράγγων
- Ανισότροπη βραχομάζα
- Longitudinal deformation profile
- Strain softening rock mass
- Numerical modeling
- Tunnel junctions
- Anisotropic rock mass
- Γεωεπιστήμες και Επιστήμες Περιβάλλοντος
- Φυσικές Επιστήμες
- Γεωεπιστήμες, διεπιστημονική προσέγγιση
- Γεωλογία
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολιτική μηχανική
- Earth and Related Environmental Sciences
- Natural Sciences
- Geosciences, interdisciplinary
- Geology
- Civil Engineering
- Engineering and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/53825