National Technical University of Athens (NTUA)
Επίδραση της ατμόσφαιρας αεροδρομίου στα μεταλλικά κατασκευαστικά υλικά
Abstract
dc:descriptionPublic sector debt is spiraling in many countries, and the desire to reduce budget deficits has suddenly become top priority for policy-makers around the world. Portfolios across the whole spectrum of government are coming under pressure. Defense is no exception. However, while armed forces will likely continue to be required to reduce budgets even while national demands on their capabilities remain very high, two trends are evident. In the Western world, the spending growth typical of high-developed countries that dominated the defense landscape for decades is over. In developing countries, defense spending is increasing significantly. Because they have lower public debt levels, most of them are successfully funding the expansion of their defense capabilities.This study is a main part of a 10-year exposure pattern, in a coastal and a non-coastal military airports in Greece, in order to determine the corrosivity of the atmosphere of the airports, to estimate the long term corrosion behavior of the standard metals (carbon steel, copper, aluminum, zinc) and aeronautical material (AlClad2024-T3), according to ISO standards, ASTM norms and literature, aiming at the optimization of the local maintenance management and increasing the aircrafts operational life. Atmospheric corrosion of aircraft, and equipment is caused by both natural and man-made environments. Natural conditions, which affect the corrosion process, are moisture, temperature, salt atmospheres, ozone, sand, dust, solar radiation, insects and birds, and microorganisms. Man-made conditions, which also affect the corrosion process, are industrial pollution, manufacturing operations, storage conditions, and shipment.The military airports selected are multi-parametric exposure sites, which are mainly characterized by (i) the relative high relative humidity and time of wetness, (ii) the «low» airborne salinity deposition rate, (iii) the «low» sulphur dioxide pollutant concentration and a number of organic compounds in the airports atmosphere, primarily due to the combustion of aviation fuel (iv) the particulate matters presence, (v) the topography of the regions (vi) the direction and speed of the wind and (vi) the atmospheric precipitations (mainly rain).A classification of the corrosivity of the airport atmosphere was based both on environmental data and the corrosion rate measurements of carbon steel and aluminum standard specimens, after the first year of exposure, according to ΙSO standards and ASTM norms. The results of the gravimetric studies on carbon steel and aluminum specimens during the first year of the outdoor exposure, according to ΙSO standards, are also compared to the expected corrosion damage according to the Corrosion Damage Algorithm (CDA) employed by the US Air Force to predict the outdoor corrosion damage in aircrafts. The ISO classification methodology provides a good correlation among corrosivity of atmospheres and actual carbon steel and aluminum corrosion damage in the specific atmosphere. The atmospheric corrosivity regarding carbon steel and aluminum has been classified as C2 «Low». After the comparison of the results of gravimetric analysis on carbon steel and aluminum specimens exposed at the airports, to the expected corrosion damage estimated by the CDA, it is proved that that the CDA does not provide a good correlation between the predicted and the actual corrosion damage at the exposure sites. The effects on the metal surfaces from the first-year weight losses underline the necessity of field studies when possible, since the corrosion rate proved to be less than originally expected for all the tested metals, due to the regional topography and the environmental characteristics.The effects of pollutants and meteorology on the corrosion of Aluminum, Carbon Steel, Copper and Zinc at the environment of the airports, after a four-year period of outdoor exposure and the anticipated corrosion rate of these metals after thirty years of outdoor exposure are presented. After a comparison of the classification of the atmospheric corrosivity, based both on environmental data and the corrosion rate measurements of carbon steel and aluminum standard specimens, after the first year of exposure, for five consecutive years, according to ΙSO standards and ASTM norms, to the expected corrosion damage estimated by the Corrosion Damage Algorithm (CDA), is observed that the CDA does not provide a good correlation between the predicted and the actual corrosion damage at the site. The results underline the necessity of field studies in order to optimize the cost-benefit ratio in all steps of the aircrafts life-cycle.By understanding these conditions, maintenance managers and personnel will be better able to prevent aircraft damage and optimize the cost-benefit ratio in all steps of the aircrafts life-cycle locally.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Titakis, Charalampos
- Τιτάκης, Χαράλαμπος
Subjects
dc:subject × 11Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/53863