Back to search

University of Patras

Θειικομπελιτικά και αλιτικά τσιμέντα χαμηλού ενεργειακού αποτυπώματος: σχηματισμός της φάσης του yeelimite

Abstract

dc:description

The production of cement is one of the most important industrial activities and contributes significantly to the economy of each country in which it is based. Cement is an inorganic hydraulic binder and a key component of concrete and mortar. It is produced by firing in special kilns a mixture of ground limestone (contains: CaO) and clay (contains: Al2O3, SiO2, Fe2O3), at temperatures of about 1450 ℃. It is used for the construction of buildings, bridges, roads and in general in all kinds of human construction thus contributing to the development of society. The main type of cement used today is Portland cement, which has a global production of 4.4 Gt per year. In addition to its many benefits, cement creates a huge carbon and energy footprint in its production, as well as the gradual depletion of mineral raw materials.A type of cement that has been of great interest in the last 40 years or so is sulfobelite cements, as they have a reduced firing temperature and carbon footprint. The difference between the above cement and Portland types of cement is the formation of the yeelimite phase and the reduced levels of the alite phase, as a result of the low firing temperature (1280-1350 ℃), but also of the high chemical affinity of sulfur with limestone that leads to the creation of the CaSO4 phase, a product detected in the present tests (up to 9.4% wt.). In addition, the utilization of by-products in the mixture of raw materials leads to a partial reduction in their demand, with the consequent reduction of the total carbon footprint during the production of cement. Finally, the use of the same production process as already existing for cement is another strong advantage, as the possible transition from the production of Portland-type cement will be smooth for the cement industries.In this thesis, the behavior of yeelimite as a component of sulfobelite cements, but also as an independent phase, was examined. Specifically, samples of stoichiometric yeelimite were prepared from pure oxides of pro-analysis grade, in laboratory scale. Then the mixture was heated, "baked", at three different temperatures, 1300 ℃, 1330 ℃ and 1350 ℃, and with two different profiles of 3 and 5 hours with rapid cooling. The yeelimite samples were examined and characterized for their physicochemical and mineralogical characteristics and the compositions produced after 3 h firing at 1300 ℃ and 1330 ℃, respectively, were selected. The resulting mortars, named Yeel1300_3 and Yeel1330_3, were studied for their compressive and flexural strength, with and without sand. Also, the effect of immersion or not in water on the strength development of their sand mortars was investigated. The conclusions of the experiments and measurements showed that the produced samples of synthetic yeelimite reached 86.1% wt. purity according to the results of the measurements, and contained the secondary crystalline phases, anhydrite, krotite and mayenite according to the XRD analysis. The hydration of the yeelimite compositions produced mortars containing the phases of yeelimite, ettringite, mayenite and aragonite, which were identified by XRD analysis. The samples of these mortars yielded flexural strengths of about 10 MPa and compressive strengths above 40 MPa. Conversely, when sand was added to the mixture according to EN 196-1, the flexural strength was about 6.5 MPa and the compressive strength of the mortars was in the class of 35 MPa. Finally, the immersion in water of yeelimite-sand mortars contributed to the development of compressive strengths, from 0 to 6 MPa, which is attributed to better hydration of the hydraulic phases, while it did not affect the flexural strength.Also, in this PhD thesis, syntheses of Portland cement were prepared at 1450 ℃ and 1340 ℃, with more than 60% wt. alite, as well as syntheses of sulfobelite cement with 30-50% wt. yeelimite at firing temperatures of 1330 ℃ and rapid cooling, with fineness of 3000, 3800 and 4500 cm2/g. The raw materials used for the manufacture of cement clinkers were a combination of natural mineral raw materials and industrial byproducts which were produced in large quantities. Therefore, limestone, shale, lava, wet fly ash and iron laminated scales were selected for Portland clinkers. Whereas, for the sulfobelite clinkers, limestone, shale, bauxite residue, flue gas desulfurization (FGD) gypsum, as well as pure alumina were chosen to fill the deficiency of aluminum oxide in the compositions. The clinkers were produced after a study of the firing profiles, as well as characterized. Also, an examination of the effect of immersion or not of the prisms on their resistances was carried out. The produced clinkers, as well as three commercial cements, were then evaluated in terms of their strengths, cohesion and setting times. Finally, a comparative assessment of the environmental behavior of the experimental sulfobelite, with the best characteristics, and two commercial cements, one Portland and one sulfobelite, according to NEN 7375, was carried out. The conclusions of the study showed that the synergy of industrial byproducts with conventional raw materials in the creation of farina of various types of cement at lower kiln temperatures (1330 ℃ and 1340 ℃), was successful. Furthermore, the syntheses of Portland ce-ment produced at 1340 ℃ showed improved characteristics than the sulfobelite ones produced at 1330 ℃ and comparable to the Portland cement produced at 1450 ℃, mainly strength, according to the standards for cement. SB30Y_50B with 30% wt. yeelimite and 50% wt. belite with a Blaine fineness of 4500 cm2/g presented the best results among the syntheses of sulfobelite cement produced, meets the strength requirements of the EN 197-1 standard for cement and belongs to the class CEM I 42.5R. Also, the sulfobelite clinkers, SB#50Y_20B with a fineness of 4100 cm2/g and SB30Y_50B and with a fineness of 3800 cm2/g marginally meet all the requirements of EN 197-1 for cement and belong to the class CEM I 32.5R. Finally, all the produced clinkers with a Blaine fineness of 3000 cm2/g did not meet EN 197-1 standard. In addition, the study of strength in immersed and non-immersed in water, commercial sulfobelite cement concrete confirmed the effect of immersion on strength development, and the validity of the EN 196-1 standard for sulfobelite cements as well. The sulfobelite clinkers, in all three finenesses examined, can be used as fast-setting mortars, for repairs, sealants or 3D printing of buildings with cement. The study also showed that the produced sulfobelite clinkers leach a percentage of harmful ions into the environment, which, however, do not exceed the acceptable limits of hazardous waste in soils for non-harmful waste, according to measurements made with the NEN 7375 standard. This result is an important observation, a result of the present work, as it shows that sulfobelite cement pre-pared from sulfate-rich byproducts does not release the latter into the environment. Finally, in this work, the principles of the circular economy were applied, and its results contributed to the reduction of the environmental footprint.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kamitsou, Maria
  • Καμίτσου, Μαρία

Subjects

dc:subject × 21

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/53948

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kamitsou, Maria; Καμίτσου, Μαρία. Θειικομπελιτικά και αλιτικά τσιμέντα χαμηλού ενεργειακού αποτυπώματος: σχηματισμός της φάσης του yeelimite. University of Patras, 2023. http://hdl.handle.net/10442/hedi/53948