Back to search

University of Patras

Ανάπτυξη πολυμερικών υλικών για χρήση σε οργανικές διόδους εκπομπής φωτός

Abstract

dc:description

The present dissertation focuses on the development of polymeric materials with light emitting properties for application on the emitting layer of Organic Light-Emitting Diodes (OLEDs). OLEDs have attracted research interest because of the advantages they present in their various applications such as solid-state lighting, their use in display panels as well as in applications of vertical and indoor farming. Their main advantages comprise their low energy consumption, the low cost of fabrication, as well as the ability to print devices of large dimensions by means of printing techniques.In the first chapter of the thesis, a brief bibliographic review is made, presenting the field of organic electronics, and its two main categories, organic photovoltaics and organic light emitting diodes. Then the different materials that have been used in the active layer of OLEDs are presented in more detail, based on the phenomena of fluorescence, phosphorescence and thermally activated delayed fluorescence (TADF).In the second chapter, aromatic polyethers with controllable light emission were developed. First, the synthetic conditions of blue-emitting aromatic polyethers bearing 2,7-bis(p-acetoxystyryl)-9-(2-ethylhexyl)-9H-carbazole (Cz) units were optimized. Next, yellow-emitting aromatic polyethers based on the 9,10-bis(p-acetoxystyryl) anthracene unit were designed and finally 2,7-bis(p-acetoxystyryl)-9-(2-ethylhexyl)-9H-carbazole (Cz) units were combined with 4,7-di(p-acetoxystyryl)-2,1,3-benzothiadiazole (BTZ) to create white light emitting polymers. In order to improve the solubilities of the synthesized polyethers, 2,6 bis(hydroxyphenyl)pyridine (HOpy) units were added to all copolymers. All the copolymers thus prepared showed very good solubilities in common organic chlorinated and non-chlorinated solvents, and presented very high molecular weights that allowed their full structural and optoelectronic characterization. Finally, they were examined for their ability to function as an active layer of OLED devices, after being deposited with spin coating and slot-die coating techniques.In the third chapter, the possibility of incorporating 1,6/1,7-bis(4-hydroxyphenyl) perylene diimide (PDI) as a red emitting moiety in aromatic co-polyethers was explored. In order to study the emission of the PDI moieties as well as to limit π-π interactions between them, copolymers bearing Anthr and HOpy units were synthesized. Next, copolymers bearing Cz and HOpy were also synthesized and studied for the same reasons. Finally, terpolymers bearing HOpy, Cz, Anthr and PDI were synthesized, in order to obtain co-polyethers where the emission of PDI can be detected. All polyethers synthesized presented excellent solubility in common organic solvents and high molecular weights. In all cases the emission of PDI in films of the copolymers was observed, when it was included in small percentages in the polymeric chain of the aromatic polyethers.In the fourth chapter, the synthesis of bis tridentate polymeric Ir(III) complexes was studied with the aim of red emission. Three monomeric Ir(III) complexes were synthesized initially with the complexation pattern Ir(C^N^C)(N^N^N) bearing 4(phenyl-4-hydroxy) terpyridine (HOtpy), 4(phenyl-4-dodecyloxy) terpyridine (C12Otpy) and 4'-(4-methylphenyl) terpyridine (CH3tpy) ligands. Two different approaches for the synthesis of polymeric Ir(III) complexes were then explored. For the first approach, a monocomplexated Ir(III) moiety was reacted with a (C^N^C) polymeric ligand, whereas for the second approach bis tridentate Ir(III) complexes bearing HO- groups were polymerized with HOpy units and bis(4-fluorophenyl)sulfone (diFSO2). In both cases, high molecular weight metallopolymers were obtained that were soluble in common organic solvents and were then cast from solution (employing either spin coating or drop casting) to produce thin films. These thin films were optically characterized to reveal the emission of the Ir(III) complexes in the red region of the visible spectrum, regardless of the complexation rate. With an increase in the percentage of Ir(III) in the polymer chain, the emission intensity in the red region increases, while at the same time the emission peak of the uncomplexated polymer chain decreases.Finally, in the fifth chapter copolymers based on a small donor-acceptor (D-A) molecule were synthesized, with an emission peak in the blue region potentially based on the TADF phenomenon. Initially a small molecule was synthesized and characterized structurally and optically, based on 2-(perfluorophenyl)-4-phenyl-6-styryl-quinoline (vin5FQ) as an acceptor and carbazole as a donor. This monomer bears a free double bond that was subsequently used in the copolymerization of the TADF monomer with 9-(4-vinylbenzyl) carbazole (VBCz) via free radical polymerization (FRP). Different ratios of the two comonomers were employed to afford copolymers with high molecular weight, and excellent solubility in common organic solvents with a blue emission peak. With a decreasing ratio of the TADF comonomer, a blue shift in the emission peak of the copolymers was observed.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Andrikopoulos, Konstantinos
  • Ανρικόπουλος, Κωνσταντίνος

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/54060

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Andrikopoulos, Konstantinos; Ανρικόπουλος, Κωνσταντίνος. Ανάπτυξη πολυμερικών υλικών για χρήση σε οργανικές διόδους εκπομπής φωτός. University of Patras, 2023. http://hdl.handle.net/10442/hedi/54060